Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. INVERSION OF LAPLACE TRANSFORMS ON MICROCOMPUTERS

    SBC: Micromath Inc.            Topic: N/A

    THE APPLICATION OF PHYSICAL-CHEMICAL PRINCIPLES TO BIOLOGICAL SYSTEMS FREQUENTLY LEADS TO SITUATIONS IN WHICH THE QUANTITATIVE TREATMENT OF CONCEPTUALLY SIMPLE MODELS IS CONFOUNDED BY THE COMPLEXITY OF THE SYSTEM. SUCH IS THE CASE, FOR EXAMPLE, IN THE STUDY OF THE PERMEATION (AND POSSIBLE CONCURRENT METABOLISM) OF DRUGS THROUGH COMPLEX BIOLOGICAL MEMBRANES, THE PHYSIOLOGICAL MODELING OF THE DISTRI ...

    SBIR Phase II 1989 Department of Health and Human Services
  2. RADIOLABELED ANTIBODY DELIVERY SYSTEM QUALITY CONTROL

    SBC: Rhomed, Inc.            Topic: N/A

    A QUALITY CONTROL (QC) TEST KIT WILL BE DEVELOPED AND AND VALIDATED FOR USE IN MEASURING THE PERCENTAGE OF IMMUNOREACTIVE RADIOACTIVITY OF RADIOLABELED ANTIBODY OR ANTIBODY FRAGMENTS INTENDED FOR PATIENT USE. THIS QC PRODUCT IS BEING DESIGNED FOR A MULTICENTERED CLINICAL TRIALOF COMPOUNDED, RADIOLABELED ANTIBODIES. PANELS OF CURRENTLYAVAILABLE MONOCLONAL ANTIBODIES (MABS) THAT HAVE POTENTIAL FOR T ...

    SBIR Phase II 1989 Department of Health and Human Services
  3. AN ULTRASONIC PLATELET HARVESTER

    SBC: Technical research Associates, Inc.            Topic: N/A

    TECHNICAL RESEARCH ASSOCIATES, INC. PROPOSES THE DEVELOPMENTOF A NOVEL PLATELET-HARVESTING SYSTEM BASED ON A PREVIOUSLY DEVELOPED ULTRASOUND SEPARATION TECHNOLOGY. THIS TECHNOLOGY, DEVELOPED UNDER AN NHLBI GRANT, ALLOWS THE SEQUENTIAL SEPARATION OF CELLS BASED ON THEIR SIZE, EVEN THOSE CELLS THAT HAVE IDENTICAL DENSITIES. FIRST, RESIDUAL ERYTHROCYTES AND LARGE LEUKOCYTES CAN BE SEPARATED FROM PLAT ...

    SBIR Phase II 1989 Department of Health and Human Services
  4. DIAGNOSTIC IMAGING INSTRUMENT DEVELOPMENT

    SBC: TECHNISCAN, INC.            Topic: N/A

    THE LONG-TERM OBJECTIVE OF THIS PROJECT IS TO DEVELOP A PROTOTYPE SCANNING SYSTEM FROM WHICH NOVEL AND ADVANCED ULTRASOUND SCANNING SYSTEMS CAN BE MANUFACTURED FOR THE IMAGING, TISSUE CHARACTERIZATION, AND DIAGNOSIS OF CANCER AND OTHER DISEASES. IT WILL GIVE SUPERIOR IMAGES OF OBSTETRICAL CONDITIONS, VASCULAR DISEASE, LIVER DISEASE, ANDOTHER ABDOMINAL CONDITIONS. THIS ADVANCED SYSTEM IS BASED ON E ...

    SBIR Phase II 1989 Department of Health and Human Services
  5. COMPACT HIGH POWER LASERS FOR MODERN DEFENSE APPLICATIONS

    SBC: Advec Corp.            Topic: N/A

    THE DEVELOPMENT OF COMPACT, HIGH ENERGY DENSITY, HIGH POWER (AND POTENTIALLY C.W.) LASER SYSTEMS CAPABLE OF PROPAGATING THROUGH BOTH AIR AND WATER COULD PAVE THE WAY FOR NEXT GENERATION TACTICAL NAVAL SYSTEMS. APPLICATIONS IN OTHER DEFENSE AREAS AS WELL AS A HOST OF COMMERCIAL APPLICATIONS ARE ALSO POSSIBLE WITH THESE TYPES OF SYSTEMS. WE PROPOSE TO PROVIDE A DETAILED PLAN AND DESIGN OF SPECIFIC E ...

    SBIR Phase II 1989 Department of DefenseNavy
  6. HYPERSONIC RAMJET LEADING EDGE MATERIALS DEVELOPMENT

    SBC: Technology Holding, LLC            Topic: N/A

    CERAMATEC HAS CONDUCTED EXPLORATORY RESEARCH AND DEVELOPMENT ON MONOLITHIC AND COMPOSITE MATERIALS IN THE ZRB2 AND TIB2 SYSTEMS AND HAS OBTAINED VERY ENCOURAGING RESULTS WITH SEVERAL PROPRIETARY COMPOSITIONS/CONSTRUCTIONS. THE AVERAGE STRENGTH OF A BASELINE TIB2 COMPOSITION WAS MEASURED AT 877 MPA (127.3 KSI). COMPOSITE STRUCTURESWITH DISCONTINUOUS REINFORCEMENT HAD STRENGTHS IN THE RANGE 400-600 ...

    SBIR Phase II 1989 Department of DefenseNavy
  7. INJECTION MOLDING OF CERAMIC MATRIX COMPOSITES

    SBC: Technology Holding, LLC            Topic: N/A

    THE OVERALL OBJECTIVE OF THIS PROJECT IS TO DEMONSTRATE THE SUCCESSFUL FABRICATION AND DENSIFICATION OF CERAMIC MATRIX COMPOSITES FORMED BY INJECTION MOLDING. TO ACCOMPLISH THIS OBJECTIVE, A DESIGNED TEST MATRIX WILL BE DEVELOPED THAT WILL SYSTEMATICALLY INVESTIGATE THE KEY INJECTION MOLDING AND DEBINDING PARAMETERS SUCH AS BINDER COMPOSITION, SOLIDS RATIO, MOLDING CONDITIONS, DEBINDING CONDITIONS ...

    SBIR Phase II 1989 Department of DefenseNavy
  8. ELECTRICAL FAULT CURRENT LIMITER

    SBC: Powertronic System, Inc.            Topic: N/A

    THE OBJECTIVE OF PHAE I IS TO DETERMINE BY AN ANALYTICAL STUDY THE OPTIMUM DESIGN APPROACH, OR APPROACHES, FOR SOLID-STATE ELECTRICAL FAULT CURRENT LIMITERS FOR THE CURRENT RANGE OF 15 TO 5000 AMPERES. THE ANALYTICAL TRADEOFF STUDY WILL INCLUDE THE FOLLOWING TASKS: 1) DEFINITION OF CURRENT LIMITER REQUIREMENTS, 2) DEFINITION OF TRADEOFF ANALYSIS CRITERIA, 3) DEFINITION OF CANDIDATE CURRENT LIMITER ...

    SBIR Phase II 1989 Department of DefenseNavy
  9. MANUFACTURE OF HIGH T(C) SUPERCONDUCTING COMPOSITE WIRES

    SBC: Technical research Associates, Inc.            Topic: N/A

    IN ORDER TO USE THE NEW CERAMIC SUPERCONDUCTOR MATERIALS IN MANY APPLICATIONS, THE NORMALLY BRITTLE MATERIALS MUST BE FORMED INTO WIRES. THIS PROPOSAL SUGGESTS A WET CHEMISTRY TECHNIQUE FOR FORMING THE SUPERCONDUCTOR COMPOUND INTO A WIRE, WHICH WILL THEN BE COATED WITH A METAL JACKET TO PROTECT THE WIRE FORM PHYSICAL ABUSE AND ENVIRONMENTAL DEGRADATION. BECAUSE THE COATING PROCESS WILL BE ESSENTIA ...

    SBIR Phase II 1989 Department of DefenseNavy
  10. FATIGUE LIFE PREDICTION BASED ON THREE-DIMENSIONAL STRESS ANALYSIS

    SBC: Terra Tek Inc.            Topic: N/A

    THE NAVY IS DEVELOPING METHODS TO DETERMINE THE SIZE AND TYPE OF DEFECTS IN HELICOPTER GEARBOXES. WITH THIS KNOWLEDGE A BETTER UNDERSTANDING OF THE FATIGUE-CRACK PROPAGATION CHARACTERISTICS OF THE GEARS AND BEARINGS WILL BE POSSIBLE AND ENHANCE THE ACCURACY IN PREDICTING THE FATIGUE LIFE. THE PURPOSE OF THIS PROPOSAL IS TO UNDERTAKE THIS STEP BY INVESTIGATING THE THREE-DIMENSIONAL STRESS DISTRIBUT ...

    SBIR Phase II 1989 Department of DefenseNavy
US Flag An Official Website of the United States Government