Award Data

THE DEVELOPMENT OF COMPACT, HIGH ENERGY DENSITY, HIGH POWER (AND POTENTIALLY C.W.) LASER SYSTEMS CAPABLE OF PROPAGATING THROUGH BOTH AIR AND WATER COULD PAVE THE WAY FOR NEXT GENERATION TACTICAL NAVAL SYSTEMS. APPLICATIONS IN OTHER DEFENSE AREAS AS WELL AS A HOST OF COMMERCIAL APPLICATIONS ARE ALSO POSSIBLE WITH THESE TYPES OF SYSTEMS. WE PROPOSE TO PROVIDE A DETAILED PLAN AND DESIGN OF SPECIFIC E ...

THE U.S. AIR FORCE HAS A NEED TO DEVELOP A GREATER CAPABILITY OF ANALYZING MUNITIONS/ARMAMENT INTERACTIONS. IT IS PROPOSED THAT THE "HULL CODE" BE MODIFIED IN A WAY THAT WILL SIGNIFICANTLY IMPROVE ITS ABILITY TO DO THIS. THE IMPLEMENTATION OF VARIOUS NUMERIC IMPROVEMENTS WILL BE ACCOMPLISHED AND A TWO DIMENSIONAL PROOF OF CONCEPT TEST WILL BE CONDUCTED.

THERE IS AN ESTABLISHED NEED FOR A SIMPLE ROBUST TRANSDUCER TO MEASURE PARTICLE VELOCITY IN SEVERE BLAST AND SHOCK ENVIRONMENTS SUCH AS NUCLEAR AND HIGH EXPLOSIVE TESTS. A GAGE CONCEPT IS PROPOSED FOR DEVELOPMENT, BASED ON THE PROVEN MEASUREMENT PRINCIPLES USED IN THE HIGHLY SUCCESSFUL DX GAGE, BUT RECONFIGURED MECHANICALLY AND ELECTRICALLY TO WITHSTAND THE HARSH SHOCK ENVIRONMENTS. THE CONCEPT RE ...

A METHOD TO PREDICT THE PERFORMANCE OF HEAVY WHEELED OR TRACKED GROUND VEHICLES IS PROPOSED. THE STEPS FOR DEVELOPING THESE PREDICTION TECHNIQUES ARE 1) ESTIMATES OF LOADS AND TRACK OR TIRE CONFIGURATION, 2) DEFINITION OF THE SOIL PROPERTIES IN PARTICULAR THE SHEAR STRENGTH, 3) NUMERICAL SIMULATION OF THE VEHICLE-SOIL INTERACTION USING A FINITE DIFFERENCE COMPUTER CODE FROM WHICH THE SOIL DEFORMAT ...

HIGH RANGE (200,000 G) ACCELEROMETERS ARE THE ONLY TRANSDUCERS THAT PROVIDE THE REQUIRED LONG-TERM DATA IN THE ENVIRONMENTS OF INTEREST TO THE BLAST AND SHOCK COMMUNITY. THESE GAGES HAVE A VERY LARGE DYNAMIC RANGE AND NOISE OFTEN MASKS THE LATE TIME (BUT EXTREMELY IMPORTANT) DATA. WE PROPOSE TO DEVELOP A CLOSE COUPLED LOGARITHMIC GAIN SIGNAL CONDITIONING SYSTEM THAT WILL CORRECT THE LATE TIME NOIS ...

THE INTENT OF THIS WORK IS TO DEVELOP AN ADVANCED ESTIMATED ALGORITHM FOR MANEUVERING TARGET STATE ESTIMATION AND PREDICTION FOR FIRE CONTROL AND TO DEVELOP A DESIGN OF A VHSIC SYSTOLIC ARRAY FOR IMPLEMENTATION OF THE ALGORITHM. THE DESIGN OF THE ALGORITHM WILL CONSIDER MANEUVERING TARGETS INCLUDING AIRCRAFT AND HELICOPTERS. IT WILL INCLUDE THE USE OF ADVANCED SENSOR INFORMATION SUCH AS AN IMAGERY ...

A FEASIBILITY STUDY OF IMPROVING DECOY PENETRATION AID (PENAID) PERFORMANCE BY SUPPLYING MEANS TO 1) ALLOW FOR DUAL CENTER OF GRAVITY (CG) LOCATION, THEREBY ENABLING INDEPENDENT FULFILLMENT OF IMPULSE BALANCING AND REENTRY STABILITY REQUIREMENTS; AND/OR 2) COUNTERACT DECOY CONING BY SENSING ITS PRESENCE, AND CORRECTING THE ANGULAR MOMENTUM OF THE DECOY TO ELIMINATE CONING.

THE OBJECTIVE OF THE PROPOSED PROJECT IS TO DEVELOP A COMPREHENSIVE ACCEPTANCE TEST PROCEDURE THAT DETERMINES WHETHER AIR DISTRIBUTION SYSTEMS IN NEW BUILDINGS ARE INSTALLED PROPERLY AND OPERATING IN AN ENERGY EFFICIENT MANNER. THE APPROCH IS TO MEASURE CRITICAL ENERGY, FLOW, PRESSURE AND TEMPERATURE PARAMETERS AND TO COMPARE THESE RESULTS WITH EXPECTED VALUES FROM DESIGN CALCULATIONS AND ENGINEER ...

CERAMATEC HAS CONDUCTED EXPLORATORY RESEARCH AND DEVELOPMENT ON MONOLITHIC AND COMPOSITE MATERIALS IN THE ZRB2 AND TIB2 SYSTEMS AND HAS OBTAINED VERY ENCOURAGING RESULTS WITH SEVERAL PROPRIETARY COMPOSITIONS/CONSTRUCTIONS. THE AVERAGE STRENGTH OF A BASELINE TIB2 COMPOSITION WAS MEASURED AT 877 MPA (127.3 KSI). COMPOSITE STRUCTURESWITH DISCONTINUOUS REINFORCEMENT HAD STRENGTHS IN THE RANGE 400-600 ...

THE OVERALL OBJECTIVE OF THIS PROJECT IS TO DEMONSTRATE THE SUCCESSFUL FABRICATION AND DENSIFICATION OF CERAMIC MATRIX COMPOSITES FORMED BY INJECTION MOLDING. TO ACCOMPLISH THIS OBJECTIVE, A DESIGNED TEST MATRIX WILL BE DEVELOPED THAT WILL SYSTEMATICALLY INVESTIGATE THE KEY INJECTION MOLDING AND DEBINDING PARAMETERS SUCH AS BINDER COMPOSITION, SOLIDS RATIO, MOLDING CONDITIONS, DEBINDING CONDITIONS ...