Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. COMPACT HIGH POWER LASERS FOR MODERN DEFENSE APPLICATIONS

    SBC: Advec Corp.            Topic: N/A

    THE DEVELOPMENT OF COMPACT, HIGH ENERGY DENSITY, HIGH POWER (AND POTENTIALLY C.W.) LASER SYSTEMS CAPABLE OF PROPAGATING THROUGH BOTH AIR AND WATER COULD PAVE THE WAY FOR NEXT GENERATION TACTICAL NAVAL SYSTEMS. APPLICATIONS IN OTHER DEFENSE AREAS AS WELL AS A HOST OF COMMERCIAL APPLICATIONS ARE ALSO POSSIBLE WITH THESE TYPES OF SYSTEMS. WE PROPOSE TO PROVIDE A DETAILED PLAN AND DESIGN OF SPECIFIC E ...

    SBIR Phase II 1989 Department of DefenseNavy
  2. COMPACT HIGH POWER LASERS FOR MODERN DEFENSE APPLICATIONS

    SBC: Advec Corp.            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of DefenseNavy
  3. LONG PULSE LASER AMPLIFIER FOR LASER RADAR APPLICATIONS

    SBC: AMSEN TECHNOLOGIES LLC            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of DefenseMissile Defense Agency
  4. HIGH PERFORMANCE COMPOSITE HEAT SINK FOR ELECTRONIC DEVICES

    SBC: Applied Research Associates, Inc.            Topic: N/A

    THE INCREASED DEMANDS FOR LARGE SCALE INTEGRATION AND VERY HIGH SPEED PROCESSING OF INFORMATION HAVE LED TO INCREASING DENSITY OF CHIPS IN ELECTRONIC MODULES. THIS, IN TURN, HAS INCREASED DRAMATICALLY THE HEAT GENERATED PER UNIT AREA. IN ORDER TO MEET THE NEW DESIGN SPECIFICATIONS, AN INNOVATIVE HEAT SINK CONCEPT IS PROPOSED. THE HEAT SINK WILL HAVE A THERMAL EXPANSION IN THE RANGE OF 2.8 PPM/DEG ...

    SBIR Phase I 1989 Department of DefenseNavy
  5. HYPERSONIC RAMJET LEADING EDGE MATERIALS DEVELOPMENT

    SBC: Technology Holding, LLC            Topic: N/A

    CERAMATEC HAS CONDUCTED EXPLORATORY RESEARCH AND DEVELOPMENT ON MONOLITHIC AND COMPOSITE MATERIALS IN THE ZRB2 AND TIB2 SYSTEMS AND HAS OBTAINED VERY ENCOURAGING RESULTS WITH SEVERAL PROPRIETARY COMPOSITIONS/CONSTRUCTIONS. THE AVERAGE STRENGTH OF A BASELINE TIB2 COMPOSITION WAS MEASURED AT 877 MPA (127.3 KSI). COMPOSITE STRUCTURESWITH DISCONTINUOUS REINFORCEMENT HAD STRENGTHS IN THE RANGE 400-600 ...

    SBIR Phase II 1989 Department of DefenseNavy
  6. INJECTION MOLDING OF CERAMIC MATRIX COMPOSITES

    SBC: Technology Holding, LLC            Topic: N/A

    THE OVERALL OBJECTIVE OF THIS PROJECT IS TO DEMONSTRATE THE SUCCESSFUL FABRICATION AND DENSIFICATION OF CERAMIC MATRIX COMPOSITES FORMED BY INJECTION MOLDING. TO ACCOMPLISH THIS OBJECTIVE, A DESIGNED TEST MATRIX WILL BE DEVELOPED THAT WILL SYSTEMATICALLY INVESTIGATE THE KEY INJECTION MOLDING AND DEBINDING PARAMETERS SUCH AS BINDER COMPOSITION, SOLIDS RATIO, MOLDING CONDITIONS, DEBINDING CONDITIONS ...

    SBIR Phase II 1989 Department of DefenseNavy
  7. HIGH SPEED MACHINING OF TITANIUM ALLOYS USING CERAMIC CUTTING TOOLS

    SBC: Technology Holding, LLC            Topic: N/A

    TITANIUM MACHINING HAS INCREASED SUBSTANTIALLY DURING THE PAST 25 YEARS BUT DESPITE INTENSE INTEREST IN FINDING IMPROVED TOOL MATERIALS,WC-6 WT. % CO IS STILL USED AT CUTTING SPEEDS LESS THAN 75 M/MIN. RECENT WORK AT CERAMATEC SHOWED THAT NOVEL CERAMIC CUTTING TOOLS COULD BE USED TO MACHINE TITANIUM ALLOYS WITH 30-75% LESS FLANK WEAR THAN CONVENTIONAL CEMENTED CARBIDES AT SPEEDS OF 100-175 M/MIN. ...

    SBIR Phase I 1989 Department of DefenseNavy
  8. CHARACTERIZATION OF FLAMHOLDER BLOWOUT IN GAS TURBINE AUGMENTORS

    SBC: CFD Research Corporation            Topic: N/A

    GAS TURBINE AUGMENTORS HAVE HISTORICALLY EXPERIENCED DIFFICULT MAINTAINING COMBUSTION AT HIGH ALTITUDES AND LOW FLIGHT MACH NUMBERS. DUE TO THE LACK OF ANALYTICAL TOOLS, TESTING PROVIDES THE PRINCIAL MEANS OF IMPROVING A DESIGN FOR STABILITY. SUCH TESTING IS EXPENSIVE AND TIME CONSUMING, THUS ALLOWING ONLY A LIMITED NUMBER OF DESIGNS TO BE ASSESSED. WHAT IS LACKING IS A GOOD UNDERSTANDING OF THE F ...

    SBIR Phase I 1989 Department of DefenseNavy
  9. HIGH TEMPERATURE SUPERCONDUCTORS WITH IMPROVED CURRENT DENSITIES

    SBC: Cryopower Associates, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of DefenseMissile Defense Agency
  10. COMPUTATIONAL MODELING OF 3-D UNSTEADY FLOW

    SBC: Ecodynamics Research Associate            Topic: N/A

    A USER-FRIENDLY COMPUTER CODE WILL BE DEVELOPED TO CALCULATE THE UNSTEADY AND HIGHLY 3-D COMPLEX FLOWPATHS IN EXHAUST DIFFUSERS OF MODERN MARINE GAS TURBINES, INCLUDING PRESSURE LOSSES AND NONUNIFORM FLOW LOSSES. THE VAX-VMS CODE WILL BE BASED UPON AN EXISTING 3-D TIME-DEPENDENT NAVIER-STOKES CODE ALREADY VALIDATED IN THE CALCULATION OF PITCHING OF A SWEPT WING SECTION MOUNTED IN A WIND TUNNEL, AN ...

    SBIR Phase I 1989 Department of DefenseNavy
US Flag An Official Website of the United States Government