List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. ANTHROPOMORPHIC CUTANEOUS TACTILE SENSING ON DEXTEROUS MECHANICAL HANDS

    SBC: BONNEVILLE SCIENTIFIC, INC.            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of DefenseAir Force
  2. HYPERSONIC RAMJET LEADING EDGE MATERIALS DEVELOPMENT

    SBC: Technology Holding, LLC            Topic: N/A

    CERAMATEC HAS CONDUCTED EXPLORATORY RESEARCH AND DEVELOPMENT ON MONOLITHIC AND COMPOSITE MATERIALS IN THE ZRB2 AND TIB2 SYSTEMS AND HAS OBTAINED VERY ENCOURAGING RESULTS WITH SEVERAL PROPRIETARY COMPOSITIONS/CONSTRUCTIONS. THE AVERAGE STRENGTH OF A BASELINE TIB2 COMPOSITION WAS MEASURED AT 877 MPA (127.3 KSI). COMPOSITE STRUCTURESWITH DISCONTINUOUS REINFORCEMENT HAD STRENGTHS IN THE RANGE 400-600 ...

    SBIR Phase II 1989 Department of DefenseNavy
  3. INJECTION MOLDING OF CERAMIC MATRIX COMPOSITES

    SBC: Technology Holding, LLC            Topic: N/A

    THE OVERALL OBJECTIVE OF THIS PROJECT IS TO DEMONSTRATE THE SUCCESSFUL FABRICATION AND DENSIFICATION OF CERAMIC MATRIX COMPOSITES FORMED BY INJECTION MOLDING. TO ACCOMPLISH THIS OBJECTIVE, A DESIGNED TEST MATRIX WILL BE DEVELOPED THAT WILL SYSTEMATICALLY INVESTIGATE THE KEY INJECTION MOLDING AND DEBINDING PARAMETERS SUCH AS BINDER COMPOSITION, SOLIDS RATIO, MOLDING CONDITIONS, DEBINDING CONDITIONS ...

    SBIR Phase II 1989 Department of DefenseNavy
  4. HIGH SPEED MACHINING OF TITANIUM ALLOYS USING CERAMIC CUTTING TOOLS

    SBC: Technology Holding, LLC            Topic: N/A

    TITANIUM MACHINING HAS INCREASED SUBSTANTIALLY DURING THE PAST 25 YEARS BUT DESPITE INTENSE INTEREST IN FINDING IMPROVED TOOL MATERIALS,WC-6 WT. % CO IS STILL USED AT CUTTING SPEEDS LESS THAN 75 M/MIN. RECENT WORK AT CERAMATEC SHOWED THAT NOVEL CERAMIC CUTTING TOOLS COULD BE USED TO MACHINE TITANIUM ALLOYS WITH 30-75% LESS FLANK WEAR THAN CONVENTIONAL CEMENTED CARBIDES AT SPEEDS OF 100-175 M/MIN. ...

    SBIR Phase I 1989 Department of DefenseNavy
  5. HIGH POWER SHORT PULSE BATTERY/CAPACITOR

    SBC: ERNEST MEADOWS INDUSTRIAL DESIGN            Topic: N/A

    N/A

    SBIR Phase I 1989 Department of DefenseMissile Defense Agency
  6. LOW COST NET SHAPE COMPOSITE STRUCTURES FABRICATION

    SBC: Radius Engineering, Inc.            Topic: N/A

    A PROGRAM IS PROPOSED FOR RESEARCH OF INNOVATIVE METHODS FOR MANUFACTURING THERMOSET COMPOSITE AIRCRAFT STRUCTURES. CONCEPTS TO BE STUDIED WILL REDUCE COSTS WHILE MAINTAINING OR IMPROVING CURRENT AEROSPACE QUALITY STANDARDS. THE PROGRAM WILL IDENTIFY AND EVALUATE LOW COST METHODS AND APPROACHES TO AUTOMATED FABRICATION OF AIRPLANE PRIMARY AND SECONDARY STRUCTURES. CONCEPTS CHOSEN FOR EVALUATION WI ...

    SBIR Phase I 1989 Department of DefenseAir Force
  7. HIGH-STRENGTH LIGHTWEIGHT TORPEDO HULLS

    SBC: R-cubed Composites Inc            Topic: N/A

    SUBMARINE LAUNCHED TORPEDOES CURRENTLY USE CAST OR FORGED ALUMINUM HULL SECTIONS. THIS PROPOSAL OUTLINES THE PROCEDURES THAT SHALL BE USED BY R-CUBED COMPOSITES TO EVALUATE TORPEDO HULL SECTIONS THAT ARE MADE UTILIZING MATERIALS THAT OFFER A GREATER STRENGTH/WEIGHT AND/OR STIFFNESS/WEIGHT RATIOS THAN DO THE PRESENT ALUMINUM HULL SECTIONS. THESE HIGHER RATIO MATERIALS ARE OF COMPOSITE CONSTRUCTION ...

    SBIR Phase I 1989 Department of DefenseNavy
  8. QUANTITATIVE LUBRICATING OIL DEBRIS MONITORING AND ANALYSIS

    SBC: Spectralytic            Topic: N/A

    SPECTRALYTIC, INC. CONTROLS THE RIGHTS AND SUBSEQUENT PATENT TO A TECHNOLOGY DEVELOPED TO INCREASE THE ACCURACY AND EFFICIENCY OF DETECTION OF INCIPIENT FAILURE OF OIL-WETTED SYSTEMS, WHILE PROVIDING DATA COMPARABLE TO CURRENT MILITARY INSTRUMENTS IN A PORTABLE UNIT. THE TECHNOLOGY, VIA A FILTRATION PROCESS, TRAPS ALL THE PARTICULATE MATTER WITHIN A GIVEN OIL SAMPLE (ENGINE, HYDRAULIC, GEARBOX, TR ...

    SBIR Phase I 1989 Department of DefenseNavy
  9. MANUFACTURE OF HIGH T(C) SUPERCONDUCTING COMPOSITE WIRES

    SBC: Technical research Associates, Inc.            Topic: N/A

    IN ORDER TO USE THE NEW CERAMIC SUPERCONDUCTOR MATERIALS IN MANY APPLICATIONS, THE NORMALLY BRITTLE MATERIALS MUST BE FORMED INTO WIRES. THIS PROPOSAL SUGGESTS A WET CHEMISTRY TECHNIQUE FOR FORMING THE SUPERCONDUCTOR COMPOUND INTO A WIRE, WHICH WILL THEN BE COATED WITH A METAL JACKET TO PROTECT THE WIRE FORM PHYSICAL ABUSE AND ENVIRONMENTAL DEGRADATION. BECAUSE THE COATING PROCESS WILL BE ESSENTIA ...

    SBIR Phase II 1989 Department of DefenseNavy
  10. NEW TECHNOLOGY IN THE USE OF HIGH TEMPERATURE COATINGS AS A REFERENCE FOR ULTRA HIGH TEMPERATURE STRAIN MEASURMENTS

    SBC: Terra Tek Inc.            Topic: N/A

    CURRENT METHODS USED TO MEASURE STRAIN AT HIGH TEMPERATURES DEPEND ON UNDESIRABLE ATTACHMENTS, EXTENSIONS, OR INDENTATIONS OF THE TEST SAMPLES. THIS STUDY WILL INVESTIGATE THE USE OF NEW TECHNOLOGY TO APPLY HIGH TEMPERATURE COATING MARKS TO TEST SAMPLES. THESE APPLIED MARKS WILL ACT AS A REFERENCE OR GAUGE FOR OPTICAL STRAIN MEASUREMENT. MATERIALS INCLUDING REFRACTORY METALS AND CERAMICS WILL BE A ...

    SBIR Phase II 1989 Department of DefenseAir Force

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government