List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until April, 2020.

  1. ONE-MILLION POUND COMPRESSION REACTION LOADER AND COMPUTER CONTROL SYSTEM DESIGN

    SBC: Terra Tek Inc.            Topic: N/A

    A ONE-MILLION POUND COMPRESSION REACTION LOADER IS REQUIRED TO OPERATE IN CONJUNCTION WITH THE WATERWAYS EXPERIMENT STATION 6-KBAR TRIAXIAL TEST DEVICE. TERRA TEK HAS DESIGNED AND CONSTRUCTED SIMILAR TEST SYSTEMS FOR IN-HOUSE TESTING. TERRA TEK HAS ALSO DEVELOPED UNIQUE COMPUTER CONTROL CODES SPECIFICALLY FOR ROCK MECHANICS APPLICATIONS. THE PROPOSED PHASE I EFFORT IS TO DESIGN A COMPRESSION REACT ...

    SBIR Phase II 1989 Department of DefenseArmy
  2. Modeling the Powder Injection Molding Process for Defect-Free, Net-Shape Metal and Ceramic Components.

    SBC: LONE PEAK ENGINEERING COMPANY            Topic: N/A

    The Army has identified a need for process innovations that would support the production of components for light weight vehicles out of advanced materials. The use of advanced, lightweight structural materials in vehicular applications presents an opportunity to enhance the effectiveness of Army units. Through more effective energy utilization, fuel will be conserved, which will simplify the log ...

    SBIR Phase I 1996 Department of DefenseArmy
  3. An Innovative Microwave Applicator for Paint Stripping

    SBC: MJR Scientific            Topic: N/A

    An effective removal of paint from many surfaces can result in increased safety and reduced maintenance cost for many systems. The ideal paint stripping system should; 1) easily strip paint from various structures, 2) allow safe operation and safe removal of paint hazardous by-products (e.g. lead paint dust), 3) not damage the surface, and 4) by simple and reliable for manual and automated operati ...

    SBIR Phase I 1996 Department of DefenseArmy
  4. Filterless Heat exchanger precleaner based on guide vane approach

    SBC: MJR Scientific            Topic: N/A

    The efficiency, maintenance cost, and service life of off-highway vehicles can be drastically improved with the development of a heat exchanger precleaner. Development challenges include ease of integration with present and new vehicles, the device compact size, high contaminates removal efficiency, low initial and maintenance cost, and high reliability. The objective of Phase I of this project is ...

    SBIR Phase II 1996 Department of DefenseArmy
  5. Radiofrequency Plasma Ionization/Time-of-flight Mass Spectrometer for Real-time MOnitoring of Trace Chemical Vapors During OB/OD Operations

    SBC: Sensar Corp            Topic: N/A

    Open burning/open detonation (OB/OD) operations for the disposal of obsolete, defective, and waste military energetic materials, such as propellants, explosives, and pyrotechnics now require emissions data to support RCRA subpart X permit applications. Many of the current analytical methods used to obtain these data, such as gas chromatography/mass spectrometry and supercritical fluid chromatogra ...

    SBIR Phase I 1996 Department of DefenseArmy
  6. Controllable Solid-State Pump for Missile Propulsion Systems

    SBC: Technical research Associates, Inc.            Topic: N/A

    New tactical missiles may require on-demand thrust control utilizing liquid propellent systems. the objective of this project is to develop a small, highly controllable, low cost. electrically driven high pressure liquid fuel pump to be used for tactical missile propulsion sustems. Phase I will investigate the feasibility of a novel solid-state pump technology. The device will operate at very h ...

    SBIR Phase I 1996 Department of DefenseArmy
  7. Enhanced Toughness SiC with High Hardness for Advanced Armor

    SBC: Technology Holding, LLC            Topic: N/A

    "Recent efforts at engineering the microstructures of SiC have resulted in fracture toughness values that are 2-3 times that of conventionally sintered SiC. However, these methods of toughening have resulted in decreased hardness, a property that iscritical for armor applications. The proposed research attempts to toughen SiC without sacrificing hardness. The Phase I effort is based on toughen ...

    SBIR Phase I 2002 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government