You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Heated Thermoplastic Fiber Placement Head for NASA Langley Research Center

    SBC: ACCUDYNE SYSTEMS, INC.            Topic: A404

    Reduced-mass polymer composite materials are crucial to the success of aerospace systems for reducing vehicle weight. But, composite material adoption is inhibited because the autoclave consolidation required is prohibitively expensive for the large tanks and skins contemplated in the Next Generation Launch Technology (NGLT) Program. To remedy this, NASA-LaRC has been developing cost-effective, ...

    SBIR Phase II 2005 National Aeronautics and Space Administration
  2. Mulitple Bio-Agent Detection with Low-cost Nanomaterial-based Devices

    SBC: ANP TECHNOLOGIES INC.            Topic: A04T022

    We propose to continue the development of rapid, handheld multiplexed assays for the detection of biological warfare agents and an associated handheld automatic reader. We will rigorously evaluate the 5-target assay developed in Phase I, and develop an 8-target multiplex during this Phase II project. The handheld automatic reader will undergo further modification and improvements to provide for ...

    STTR Phase II 2005 Department of DefenseArmy
  3. Enhanced Mobility for Small Vehicle Platforms

    SBC: AUTONOMOUS SOLUTIONS INC            Topic: A03215

    This SBIR proposal consists of three (3) related research efforts. Research effort 1 will focus on further development of the configurable running gear / shape shifting track concept as started by ASI during the Phase I award. Research effort 2 will focus on the development and completion of the hardware and electronics systems of the T4 robot as started at the Center for Self Organizing and Int ...

    SBIR Phase II 2005 Department of DefenseArmy
  4. Composite, High-Temperature Seals for Gas Separation Membrane Devices

    SBC: Technology Holding, LLC            Topic: 44c

    76066S Ceramic membranes with ion-specific conducting properties can provide gases with purity unmatched by other gas separation methods. However, in order to realize the full potential of these membrane devices, high temperature seal materials are required to isolate the ultrahigh purity product gas from the inlet gas mixture. This project will develop a composite seal material that combines t ...

    SBIR Phase II 2005 Department of Energy
  5. Compact System for Removal of Dental Office Mercury

    SBC: COMPACT MEMBRANE SYSTEMS, INC.            Topic: N/A

    DESCRIPTION (provided by applicant): By instituting a number of precautions (e.g. personal monitoring, enhanced ventilation) dentists have been able to reduce the risk of mercury escaping into the environment. While these precautions are significant there are still numerous instances of mercury emissions above approved regulations. These Hg emissions compromise health of dental personnel. In Phase ...

    SBIR Phase II 2005 Department of Health and Human ServicesNational Institutes of Health
  6. Fully Integrated Optical Micro Gyroscope

    SBC: Elsicon, Inc.            Topic: 18a

    76101-With the increased push toward system miniaturization and automation there exists a growing need for components that are small in size, reliable, robust, and cheap to manufacture. This is particularly true for systems used to detect the presence of weapons of mass destruction. Among those miniature components, high performance gyros are needed in real-time synthetic aperture radar systems ...

    STTR Phase II 2005 Department of Energy
  7. Hardware Assisted Electronic Circuit Simulation System

    SBC: EM PHOTONICS INC            Topic: SB041029

    In Phase I, EM Photonics demonstrated the viability of using a reconfigurable hardware approach to accelerating the simulation of electronic circuits based on their electromagnetic properties. In Phase II, this technology will be used to create a solver capable of analyzing mixed signal circuits 64 times faster than is currently available from equivalent software. The resulting device will shrin ...

    SBIR Phase II 2005 Department of DefenseDefense Advanced Research Projects Agency
  8. Chemical Nano-Imprint Lithography

    SBC: EM PHOTONICS INC            Topic: SB041030

    The overall objective of this Phase II project is to optimize the fabrication procedure associated with the chemical lithography proposed in Phase I to fabricate nanophotonic structures and devices at a fraction of the cost of existing technologies. We plan to use our optimized chemical lithography procedure to fabricate an ultra-high resolution patterns and devices including nano-probe for near f ...

    SBIR Phase II 2005 Department of DefenseDefense Advanced Research Projects Agency
  9. Fiber Optical Micro-Sensor for Measuring Tendon Forces

    SBC: EM PHOTONICS INC            Topic: N/A

    DESCRIPTION (provided by applicant): The ability to accurately measure in vivo tendon forces would have a broad impact on studying tissue properties, advancing assistive technologies, and furthering our scientific understanding of the human neuromuscular control system. Myoelectric prosthetics and functional electrical stimulation devices could utilize closed-loop control strategies, resulting in ...

    SBIR Phase II 2005 Department of Health and Human ServicesNational Institutes of Health
  10. High Throughput DSC for Drug Screening

    SBC: Energetic Genomics Corporation            Topic: N/A

    DESCRIPTION (provided by applicant): High-throughput screening approaches are ubiquitious in the pharmaceutical industry as part of the drug discovery process. A variety of sensors are used in these screens, the most common of which are spectroscopic. Such absorbance or fluorescence based high-throughput screens inevitably require the use of extrinsic probes to provide a signal, and often require ...

    SBIR Phase II 2005 Department of Health and Human ServicesNational Institutes of Health
US Flag An Official Website of the United States Government