You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Accelerated Adhesive Cure for Nutplate Repair

    SBC: Texas Research Institute, Austin, Inc.            Topic: AF161124

    ABSTRACT: The F-35 Joint Strike Fighter uses metal nutplates to secure fasteners in areas that have no backside access at the time of installation.These nutplates are attached with a two-part adhesive which currently requires a 24 hour cure at room temperature.This long cure time negatively impacts the aircrafts availability if an aircraft comes back to the depot and they have a disbond of a nutpl ...

    SBIR Phase I 2016 Department of DefenseAir Force
  2. Accelerating Instructor Mastery

    SBC: COGNITIVE PERFORMANCE GROUP OF FLORIDA, LLC            Topic: N152108

    Military instructors do not have the time or support necessary to achieve mastery or even ensure continued professional development during their tenure as instructors. Teaching skill must develop to adequate levels in the early months of the typical three-year tenure and continue to grow and progress after initial formal training. Each formal school in the Marine Corps has a unique method of initi ...

    SBIR Phase I 2016 Department of DefenseNavy
  3. Accelerating Instructor Mastery (AIM)

    SBC: Design Interactive, Inc            Topic: N152108

    Mission readiness is highly dependent upon the quality of instruction units receive; thus, it is critical that military instructors develop instructional competencies, along with domain expertise, to adequately promote relevant KSAs among trainees. Unlike civilian career educators, military instructors are not often afforded the time or resources to fully develop their teaching skills prior to ins ...

    SBIR Phase I 2016 Department of DefenseNavy
  4. ACOUSTO-OPTIC PROCESSOR FOR SYNTHETIC APERTURE RADAR

    SBC: Photonic Systems, Inc.            Topic: N/A

    PROCESSING OF SAR DATA IN REAL TIME REQUIRES HIGH SPEED COMPUTATION DEVICES CURRENTLY BEYOND THE STATE-OF-THE-ART OF CONVENTIONAL METHODS. DESIRED PROCESSORS MUST ALSO BE SMALL, RUGGED AND LOW POWER TO BE DEPLOYED ON AIRCRAFT. OPTICAL TECHNIQUES CAN SATISFY THESE REQUIREMENTS WITH IMAGINATIVE ARCHITECTURES. THIS PROPOSAL PRESENTS AN INNOVATIVE APPROACH FOR REAL TIME SAR IMAGE RECONSTRUCTION THAT C ...

    SBIR Phase I 1987 Department of DefenseAir Force
  5. Additive Manufacturing of 17-4 PH Stainless Steel Metal Matrix Composites using Nickel functionalized Carbon Nanotubes

    SBC: Shepra, Inc.            Topic: N16AT007

    Additive Manufacturing (AM) has a potential to significantly reduce the cost and lead time associated with the maintenance and sustainment issues faced by the US Navy. However, current materials such as 17-4 PH Stainless Steel typically achieve half the required mechanical properties when additively manufactured, thus limiting the use of AM in critical parts. Recent advancements in carbon nanotube ...

    STTR Phase I 2016 Department of DefenseNavy
  6. Additive Manufacturing of Refractory Metal Alloys Through Superconducting Electron Beam Technology

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: N142125

    Refractory metal alloys are essential materials in many defense and aerospace applications including missile and rocket thruster nozzles, valves and manifolds. This is due to the extremely high melting temperatures of these materials (> 4000 F), high hardness and a resistance to heat and wear. However, these same properties that make refractory metals so prized for rocket components make the manuf ...

    SBIR Phase I 2016 Department of DefenseNavy
  7. Advanced Cathode for High Energy Li-Air Batteries

    SBC: Lynntech Inc.            Topic: N152093

    The energy needs of naval aircraft are increasing significantly as the Navy modernizes its fleet. Current lithium-ion cells are insufficient for meeting these requirements. Li-air chemistry has the potential to meet the Navys energy demands. However, the state-of-the-art non-aqueous Li-air cells suffer from sluggish charging kinetics, clogging of mass transfer pathways and high resistance originat ...

    SBIR Phase I 2016 Department of DefenseNavy
  8. Advanced Cognition Processing and Algorithms for Improved Identification

    SBC: Vadum, Inc.            Topic: MDA15001

    Contractor will develop innovative concepts and techniques to develop target recognition approaches focused on cognitive synthesis of current and emerging sensor data sources.(Approved for Public Release 15-MDA-8482 (17 November 15))

    SBIR Phase I 2016 Department of DefenseMissile Defense Agency
  9. Advanced Coordinated Control, Formation Flying for Nano-Satellite Applications

    SBC: Microcosm, Inc.            Topic: A152096

    The focus and priority of this topic is seeking innovative space-based remote sensor capabilities supporting all-weather, day-night imaging capability.Preliminary research assessments highlight the availability of next generation device/component technologies and outline novel approaches for creating flotillas, swarms, and/or formations of nano-satellites with multi-faceted functions and sensor ca ...

    SBIR Phase I 2016 Department of DefenseArmy
  10. ADVANCED FACILITIES TO EXPEDITE DESIGN AND EVALUATION OF COMMUNICATIONS SYSTEMS

    SBC: Information Research            Topic: N/A

    THE TECHNICAL OBJECTIVE OF THIS PROJECT IS TO ESTABLISH THE FEASILBILITY OF SATISFYING THE REQUIREMENTS OF THE U.S. ARMY COMMUNICATIONS ELECTRONICS COMMAND (CECOM) FOR RAPID AND EFFECTIVE MODELING OF U.S. ARMY COMMUNICATION SYSTEMS. THE METHOD WE PROPOSE FOR SATISFYING THESE REQUIREMENTS IS TO ADAPT A TOP-DOWN DESIGN SYSTEM FOR ELECTRONIC SYSTEMS BEING DEVELOPED FOR THE U.S. NAVY TO MODEL-ING OF C ...

    SBIR Phase I 1987 Department of DefenseArmy
US Flag An Official Website of the United States Government