Award Data

In the proposed Phase I SBIR program, Aymont Technology and CoolCAD Electronics will design and demonstrate prototype silicon carbide (SiC) avalanche photodiodes (APD) specifically designed for high-efficiency, single-photon counting of 121.6 nm Lyman-alpha photons. This detector will be provided to relevant personnel at NIST for calibration and testing. Both discrete APDs and arrays will be used ...

The proposed effort is to build a high resolution, high speed spatial light modulator (SLM) to be used in infrared (IR) spectral projectors. An IR spectral projector produces programmable spectra by dispersing light onto a programmable array, currently digital micromirror devices (DMDs), which either transmit or block selected components of the light. the light is then recombined to form complex s ...

There are many applications for hyperspectral image detectors, but for the detectors to be widely accepted standardized calibration protocols must be developed. This research aims to bridge this gap through the development of a commercially available hyperspectral image projector (HIP) system. The proposed effort is to build a prototype visible HIP system to generate calibrated, realistic imagery ...

New innovative technology for the visually impaired has been developed by NIST. If commercialized, it would provide refreshable tactile graphical information to the visually impaired, enabling them to compete on a more equal footing in the workplace and the education system.

This is an SBIR Phase II proposal to develop a tactile refreshable computer display prototype (TRCD) that will support multiple tactile alphabets (e.g. ELIA, braille, and Roman), multiple lines of text, and graphics to benefit the more than 1.8 million blind Americans. Commercially available TRCDs are expensive (~$12,000, or $19 per actuator), provide only one line of text (with 640 actuators) and ...

A wireless sensor and actuator network capable of providing precision time synchronization between the nodes of the network will be developed. The IEEE 1451.0 smart transducer interface and IEEE 1588 time synchronization standards will be combined, with additional software and hardware to provide synchronization between the clocks on the Wireless Transducer Interface Modules (WTIM) sensors/actuato ...

A novel chemical vapor deposition (CVD) based step-flow epitaxy process is proposed for controllable growth of SiC nanowires with high polytype integrity. SiC nanowires will be grown in a modified commercial high-temperature CVD reactor, used by industry for growing high-quality SiC epitaxial thin films. Different polytypes of SiC nanowires will be grown by choosing appropriate substrate materials ...

Identify and study candidate architectures for supporting and cooling massive (~5 Kg) arrays of transition edge sensors, achieving hold times for one week at temperatures below 100mK.

Transition Edge Sensor (TES) detector development at NIST has reached a level where arrays containing several thousand pixels (kilopixels) are practical and , indeed, necessary for fielding systems required for many industrial, research, and homeland security applications. Current easily deployable cryostat technology required to reach the ultra-cold operating temperatures of TES arrays (50 to 100 ...

The work proposed will provide a demonstration of feasibility and specific design recommendations for building an elevated-temperature resonating crystal balance with nanogram sensitivity. The approach will build upon existing technology commercialized by Masscal for operating a QCM in a temperature-controlled calorimeter. Precise temperature control and new types of crystal sensors will be used t ...