You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY21 is not expected to be complete until September, 2022.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

  1. WEIGHING TRUCK COMBINATIONS IN MOTION, SOLELY ON THE TRACTOR

    SBC: Airsport Corp.            Topic: N/A

    AN IMPROVED METHOD OF WEIGHING TRUCKS WHILE IN MOTION IS PROPOSED. TO INCREASE EFFICIENCY AND REDUCE TIME LOST AT WEIGH STATIONS, THE TRUCKING INDUSTRY NEEDS TO EXCHANGE DATA, INCLUDING WEIGHT DATA, BETWEEN MOVING TRUCKS AND ENFORCEMENT FACILITIES. LEGALLY LOADED TRUCKS WOULD THEN BE ABLE TO PROCEED WITHOUT STOPPING. THIS INVOLVES WEIGH-IN-MOTION. PRESENT WEIGHING TECHNIQUES INVOLVE LOAD CELLS OR ...

    SBIR Phase II 1995 Department of Transportation
  2. A Framework for an Optimal and Adaptive BMDS Firing Doctrine

    SBC: CARDINAL SYSTEMS & ANALYSIS, INC.            Topic: MDA02017

    The BMDS is being developed as a fully integrated, layered defense capable of defending against all ranges of threats. A critical aspect of this development is an integrated approach to interceptor allocation. A model-based framework for optimizing multi-layer BMDS performance, developing interceptor firing doctrine, and providing for adaptive, real-time interceptor allocation was developed in P ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  3. EMBEDDED PAVEMENT STRESS SENSORS CONTAINING PIEZOELECTRIC COMPOSITES

    SBC: Fiber Materials, Inc.            Topic: N/A

    FIBER MATERIALS, INC. (FMI) PROPOSES SENSORS WHICH CAN BE EMBEDDED IN PAVEMENT TO MEASURE STRESS AND STRAIN FROM TRUCKS PASSING OVER AT SPEEDS UP TO 60 MPH. THESE SIMPLE, DURABLE SENSORS WILL BE MADE FROM PIEZOELECTRIC COMPOSITES WHICH ACT AS PASSIVE SENSORS AND DEVELOP A CHARGE PROPORTIONAL TO THE APPLIED PRESSURE. THE CHARGE IS CONVERTED TO A VOLTAGE WHICH IS RECORDED ON NEARBY EQUIPMENT. THE PH ...

    SBIR Phase II 1995 Department of Transportation
  4. Innovative Manufacturing Processes- THAAD Midbody & Booster TPS Fabrication

    SBC: Fiber Materials, Inc.            Topic: BMDO01004

    Fiber Materials, Inc. (FMI), in partnership with Lockheed Martin Space Systems Company (LMSSC), proposes to develop innovative, reduced weight and cost, thermal protection systems for the THAAD mid-body and booster based on the placed fiber fabrication process. Placed fiber is a manufacturing process in which fiber and resin is sprayed to form a material that can substitute for a prepregged clo ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  5. Divert and Attitude Control Systems (DACs) Thruster Non-Destructive Examination

    SBC: Fiber Materials, Inc.            Topic: MDA02038

    The behavior of flaw growth in hetrogeneous materials such as reinforced ceramic matrix composites (CMCs) is not well understood. The use of CMC materials for thin wall components such as interceptor directional control thrusters offer significant advantages in cost and weight reduction over refactory metals now in use. However, no NDE techniques or analytical tools have yet been determined to b ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  6. HfB2-filled Braided C/SiC Nozzles for High Performance DACS

    SBC: Fiber Materials, Inc.            Topic: BMDO02006

    The primary goal of the proposed Phase II effort will be to demonstrate materials and processes necessary to reliably produce a viable high temperature DACS thruster via the enhancement of the baseline C/SiC composite with hafnium diboride matrix doping. The viability of the resulting prototype CMC thrusters will be evaluated through complete thermomechanical evaluation of optimized materials and ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  7. Advanced Divert and Attitude Control Materials, Attitude Control System (ACS) Thruster Body Application

    SBC: Fiber Materials, Inc.            Topic: MDA03087

    Fiber Materials, Inc. (FMI), teamed with Aerojet, proposes to demonstrate a low cost material concept applicable to the SM-3 ACS. The material, a 4-dimensionally reinforced carbon-carbon containing silicon carbide to eliminate oxidation and erosion, will offer significant benefits in comparison to the refractory metals now in use such as rhenium, columbium, and molybdenum. Refractory and other m ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
  8. Advanced Divert and Attitude Control System Materials for Liquid/Gel DACS Systems

    SBC: Fiber Materials, Inc.            Topic: MDA03087

    Fiber Materials, Inc., teamed with Aerojet and Plasma Processes, Inc., will complete the design and development leading to fabrication and demonstration of a ceramic matrix composite thrust chamber and requisite joining technologies for an advanced liquid/gel divert and attitude control (LDACS) application. The proposed Phase II development program will utilize a non-eroding material based on carb ...

    SBIR Phase II 2004 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government