Award Data

In addition to hazards relevant to automobiles, motorcycle riders must remain vigilant for hazards that pose significant danger uniquely to motorcycles, such as uneven terrain, sand/gravel, and potholes. However, there is currently no motorcycle-specific hazard tracking or alerting system available for riders. To address this need, Charles River Analytics executed a successful Phase I effort to de ...

The connected vehicles (CV) program is a DOT initiative that uses dedicated short-range communications (DSRC) to enable safer and greener surface transportation. Ongoing efforts exist to bring motor vehicles and infrastructure onto CV networks, but bicycles have been largely overlooked. Consequently, a significant need exists to bring cyclists onto these networks so other connected entities can be ...

In Phase I, ZKxKZ designed, developed and demonstrated an approach for fabrication and rapid installation of low cost modular mini-roundabouts made from recycled plastic boards. Phase 1 culminated in the demonstration of half-scale 24’ diameter roundabout’s center circle made with the recycled boards. The same material and modular construction approach can be applied to other roundabout featur ...

Automated passenger counter has been used in the transit systems for automated passenger counting and reporting. These systems have suffered counting accuracy issues, particularly at high rider load points, and at end-of-line count reconciliation. In Phase I, we have successfully developed systems for passenger counting and re-identification. Test results using the data collected at a transit b ...

Locomotives weigh up to 240 ton each. Rail cars can weigh from 30 ton (empty) to 140 ton (loaded). Track construction and maintenance equipment, earthmoving plant and haul trucks can all weigh 10’s of tons each. Rail road and yard workers can, literally, be surrounded by these very large, heavy and potentially dangerous pieces of equipment. When a 200-lb worker ‘argues’ with any of these equ ...

Federal regulations require a seat belt assembly with a locking lap belt to be available in passenger seating positions to securely accommodate a child restraint system. More recently, federal regulations have been updated to improve the quality of the child restraint system and the mechanisms by which it is secured. However, there are restrictions on total weight capacities for new restraint sy ...

In Phase II, we developed a new system for pedestrian detection, tracking and counting. In this system, both IR LED stereo camera and laser scanner are selected for use. This Phase II system was field-tested at a few cities and achieved a counting accuracy about 97% over 5,000 pedestrians counted. The system can also stream the ped counts and images to a remote server. Based on the feedback from p ...

THE FOLLOWING PROPOSAL PROVIDES THE RATIONALE AND METHODOLOGICAL APPROACH FOR THE DEVELOPMENT OF A GEOGRAPHICALLY DETAILED VISUAL DATABASE AND RETRIEVAL SYSTEM TO SUPPORT THE INTERMODAL PLANNING REQUIREMENTS OF ISTEA. CURRENTLY, STATES AND METROPOLITAN PLANNING ORGANIZATIONS HAVE ACCESS TO LIMITED AND INCONSISTENT FREIGHT INFORMATION RESOURCES WITH WHICH TO INTEGRATE INTO INTERMODAL PERFORMANCE SY ...

A SYSTEM UTILIZING THE FREE-WING CONCEPT HAS BEEN DESIGNED FOR LIGHT AND VERY LIGHT WING-LOADING AIRCRAFT THAT ACCOMMODATES MODERATE TO HEAVY TURBULENCE WITHOUT TRANSMITTING HIGH GUST LOADINGS TO THE AIRFRAME OR THREATENING LOSS OF CONTROL. THE PROJECT WILL TEST THE SYSTEM IN A RESEARCH VEHICLE APPROXIMATING THE DESIGN CRITERIA SET FORTH IN 14 CFR, PART 103; THE RESEARCH VEHICLE IS UNMANNED.

PRESENT TRAIN DETECTION SCHEMES RELY LARGELY ON A LOW RESISTANCE THROUGH THE TRAIN'S WHEELS TO PERTURBATE A STABLE ELECTRICAL CIRCUIT. WHILE ELEGANT IN PRINCIPLE, THE DESIGN IS PLAGUED BY OXIDE FILMS AND MATERIAL BUILDUP ON THE RAIL, SNEAK PATHS THROUGH THE BALLAST AND OTHER UNCONTROLLABLE VARIABLES. KVH INDUSTRIES PROPOSES TO DESIGN AND DELIVER A "SMART MAGNETOMETER"-BASED SENSOR PACKAGE WHICH WI ...