You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Reverse Engineering and Source Development for F107 Replacement Components

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DLA181007

    The Defense Logistics Agency (DLA) is seeking small businesses capable of manufacturing and supplying an assortment of replacement components for the F107 turbofan engine. The F107 is most commonly used as the propulsion system for cruise missiles. Given the F107’s primary use, maintaining a supply chain capable of keeping the engine in operation is paramount. DLA has stated that the F107 engine ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  2. Dual Plane 3D Compton Scattering Imager with Pixelated CZT Detectors for 1-10MeV Gamma Ray

    SBC: H3D            Topic: None

    Phase I has proven that the current setup achieves better than 8mm spatial resolution for 2.2MeV prompt gammas. However, 1mm spatial resolution presents a significant challenge for the current setup due in part to limited timing resolution and count rate. A new analog ASIC will be developed to replace the current analog ASIC that will have better timing resolution and deliver higher count rates. I ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  3. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: Made In Space, Inc.            Topic: DLA181002

    Made In Space, Inc. (MIS) proposes an Aulë Filament Inspection System (AFIS) to provide filament quality control capability for additive manufacturing (AM). AFIS enables the Defense Logistics Agency (DLA) to confidently support AM efforts both internal to DLA and throughout its customer base such as the Marine Corp Advanced Manufacturing Operations Cell. To create the product quality line system, ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  4. Advanced Instrumentation for Non-Nulling Stack Velocity Testing

    SBC: AIRFLOW SCIENCES CORPORATION            Topic: None

    Industrial facilities, manufacturing plants, and electric power plants that burn fossil fuels exhaust the combustion products to atmosphere through their smokestacks. Stack pollutant emissions are quantified using manual testing methods developed in the 1960s, which are prone to error if non-axial flow exists in a stack.Recently, NIST has been working on an improved technique of performing 3D flow ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  5. Development of a Neutron-based Nondestructive Test Method for Concrete Petrography and Chemical Analysis

    SBC: TOURNEY CONSULTING GROUP, LLC            Topic: None

    To evaluate the technical feasibility of prompt gamma neutron activation (PGAA) as an alternative to a set of standard destructive tests of concrete petrography including aggregate type, water/cement ratio, aggregate/binder ratio, density, chloride content and chloride bulk diffusion constant; and to determine the specifications for the design of a dedicated commercial laboratory-based PGAA facili ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  6. SGSI and FLOLS Lens Development and Source Approval

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DLA172001

    In Phase II, Mainstream will continue development efforts for several lenses used in the stabilized glide slope indicator (SGSI) system and Fresnel lens optical landing system (FLOLS). Mainstream produced prototype clear acrylic lenticular lenses prototypes that passed optical tests performed by the engineering support activity (ESA) at NAWCADLKE in Phase I. Mainstream will develop conformal color ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  7. Source Approval for Hard-to-Source Items

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DLA172002

    Additional sources of supply are desired by the Defense Logistics Agency for Land and Maritime hard-to-source items, as well as critical application and safety items (CAI/CSI) for Aircraft Launch and Recovery Equipment (ALRE). Mainstream has carefully reviewed the requirements provided in the technical data packages for several NSNs and determined that they fit within our manufacturing capabilitie ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  8. Production and Source Approval for NSN 5305-01-417-8566 Socket Cap Screw

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DLA183009

    The Defense Logistics Agency aims to improve product availability and increase competition on a multitude of NSN items for the Nuclear Enterprise Support Office by introducing capable, small business suppliers through the Source Approval Request (SAR) process. Addition of approved sources for these critical/weapon system items can lead to reduced cost and decreased lead times. Expediting the procu ...

    SBIR Phase I 2019 Department of DefenseDefense Logistics Agency
  9. Production and Source Approval for NSN 5305-01-661-8323 Shoulder Screw

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DLA183010

    The Defense Logistics Agency aims to improve product availability and increase competition on a multitude of NSN items for the Nuclear Enterprise Support Office by introducing capable, small business suppliers through the Source Approval Request process. Addition of approved sources for these critical/weapon system items can lead to reduced cost and decreased lead times. Expediting the procurement ...

    SBIR Phase I 2019 Department of DefenseDefense Logistics Agency
  10. Source Approval and Low Rate Production of the Valve Piston (4810-01-269-4808)

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DLA183006

    Increased competition and improved lead times are desired by the Defense Logistics Agency (DLA) to facilitate NESO in supporting the needs of the U.S. Air Force and U.S. Navy nuclear communities. Mainstream Engineering has carefully reviewed the technical data package for NSN 4810-01-269-4808 provided in the solicitation and is confident that we possess the manufacturing capability, quality manage ...

    SBIR Phase I 2019 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government