You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Lightweight Gearbox for Air Cushion Vehicles

    SBC: Pratt & Miller Engineering & Fabrication, LLC            Topic: N181072

    The Re-Designed Lightweight Gearbox

    SBIR Phase II 2019 Department of DefenseNavy
  2. Micro Identification Friend or Foe (IFF)

    SBC: R CUBED ENGINEERING LLC            Topic: N142102

    Development of a small UAS compatible Micro IFF transponder including Modes 1,2,3A,C,S , Dual band ADS-B, UAT, Mode 5 and interrogator. All modes include both receive (in) and transmit (out). Size is less than 8 cu inches and weight is under 6 oz with full AIMS 17-1000 compliance, including 500 watt output with diversity. Unit is also low cost and low maintenance. Unit meets full military temperat ...

    SBIR Phase II 2019 Department of DefenseNavy
  3. Nano-Hardened Electroplated Coatings for Improved Rotary Cannon Lifespan

    SBC: MAINSTREAM ENGINEERING CORP            Topic: N192057

    Rotary cannon type weapons, such as the M197 electric cannon, currently require servicing every 28 days in order to remove abrasive particulate and to relubricate the rotary drum. The Navy is currently seeking a one-time application coating, applied at the time of manufacturing or retrofit, which will at least double the time between servicing to 56 days or more. Mainstream Engineering proposes to ...

    SBIR Phase I 2019 Department of DefenseNavy
  4. Dual Plane 3D Compton Scattering Imager with Pixelated CZT Detectors for 1-10MeV Gamma Ray

    SBC: H3D INC            Topic: None

    Phase I has proven that the current setup achieves better than 8mm spatial resolution for 2.2MeV prompt gammas. However, 1mm spatial resolution presents a significant challenge for the current setup due in part to limited timing resolution and count rate. A new analog ASIC will be developed to replace the current analog ASIC that will have better timing resolution and deliver higher count rates. I ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  5. High Power Density Aircraft Power Factor Correction

    SBC: MAINSTREAM ENGINEERING CORP            Topic: N181005

    The goal of this proposal is to develop a passive power factor corrector (PFC) suitable to be installed into military combat aircraft. The proposed PFC design weighs less than 20 lbs, can utilize either forced or natural convection cooling, and can operate in ambient temperatures as high as 71 °C. During the Phase I Mainstream built and tested a PFC device that met or exceeded all of the specifie ...

    SBIR Phase II 2019 Department of DefenseNavy
  6. Automated, Rapid Non-Destructive Inspection (NDI) of Large Scale Composite Structures

    SBC: THERMAL WAVE IMAGING INC            Topic: N092097

    Phase II.5 proposal, an extension of Phase II contract N092-097. In the previous Phase II program, TWI demonstrated that Large Standoff / Large Area Thermography (LASLAT) can successfully be applied to Nondestructive Inspection (NDI) of composite aircraft structures. The method employed was based on optical excitation using a novel projector and signal processing developed by TWI. Capability was d ...

    SBIR Phase II 2019 Department of DefenseNavy
  7. Peregrine Ph II

    SBC: SOAR TECHNOLOGY INC            Topic: N181015

    SoarTech, Forward Slope, and Capt. Brian Donegan (US Navy, Retired), will develop Peregrine, a robust, ready to transition, 4D overlay generation capability. Peregrine will develop software services ready for Fleet Exercise (FLEX) exerperimentation and transition to the JMPS Multi-Vehicle Planner. Peregrine will provide air planners with services that (1) connect to, synchronize, and transform dyn ...

    SBIR Phase II 2019 Department of DefenseNavy
  8. Advanced Instrumentation for Non-Nulling Stack Velocity Testing

    SBC: AIRFLOW SCIENCES CORP            Topic: None

    Industrial facilities, manufacturing plants, and electric power plants that burn fossil fuels exhaust the combustion products to atmosphere through their smokestacks. Stack pollutant emissions are quantified using manual testing methods developed in the 1960s, which are prone to error if non-axial flow exists in a stack.Recently, NIST has been working on an improved technique of performing 3D flow ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  9. Development of a Neutron-based Nondestructive Test Method for Concrete Petrography and Chemical Analysis

    SBC: TOURNEY CONSULTING GROUP, LLC            Topic: None

    To evaluate the technical feasibility of prompt gamma neutron activation (PGAA) as an alternative to a set of standard destructive tests of concrete petrography including aggregate type, water/cement ratio, aggregate/binder ratio, density, chloride content and chloride bulk diffusion constant; and to determine the specifications for the design of a dedicated commercial laboratory-based PGAA facili ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  10. Homopolar AC Electric Machines for Naval Applications

    SBC: McCoy Consulting, LLC            Topic: N19AT007

    The objective of this proposed effort is to increase the power and torque density of rotating electric machinery for Naval applications by up to 50%. This aggressive goal will be achieved by developing the novel homopolar AC machine (HAM) topology. This relatively un-studied topology relies on solenoidal field and armature coils, making manufacturing simpler than traditional machines. The HAM elim ...

    STTR Phase I 2019 Department of DefenseNavy
US Flag An Official Website of the United States Government