Award Data

The goal of this project is to develop a novel experimental protocol utilizing the fundamentals of cutting-edge materials science, chemistry, and advanced nanoengineering to create a first-of-its-kind multifunctional cementitious coating material that mitigates the detrimental effects of irradiation, heat, and corrosive in nuclear power plants. Capitalizing on our promising preliminary results, th ...

Phase I has proven that the current setup achieves better than 8mm spatial resolution for 2.2MeV prompt gammas. However, 1mm spatial resolution presents a significant challenge for the current setup due in part to limited timing resolution and count rate. A new analog ASIC will be developed to replace the current analog ASIC that will have better timing resolution and deliver higher count rates. I ...

This project will develop a new scientific instrument optimized for the advanced characterization of near-infrared fluorescent nanoparticles that can exist as left- or right-handed structures (enantiomers). Single-walled carbon nanotubes (SWCNTs) are the leading current example of such nanomaterials. Applied NanoFluorescence, LLC (ANF) proposes a novel multi-mode chiroptical spectrometer that can ...

Two main problems are targeted by the proposed work: (1) the underutilization of coal, a valuable natural resource, has led to a catastrophic drop in employment within the coal industry ecosystem in specific geographic areas in the country; and (2) the need within the insurance-driven roof replacement market for a suitable, light weight, low cost, high durability roofing material.These problems wi ...

Thermochemical processing via hydrothermal liquefaction (HTL) is capable of processing a broad range of feedstocks, has a favorable net energy ratio, and produces an energy-dense liquid biooil product.However, there is an obstacle with current HTL processes that has hampered the adoption of this technology—the HTL process produces a considerable amount of aqueous organic byproducts and HTL oil r ...

Liquid-metal coolants are one of the most promising solutions for the challenges of advanced high temperature nuclear reactor systems.They optimize heat transfer, neutronics, safety, and compactness of the reactor systems.Molten lead and lead-bismuth eutectic (LBE) are the primary coolant candidates due to their unique thermo-mechanical and neutronics properties.However, they are highly corrosive ...

Indium tin oxide (ITO) films are currently the most widely used transparent conductor in optoelectronic applications. However, ITO suffers from several major technological and economic limitations for large area applications such as inadequate performance, high cost, and brittleness. The primary objective of this Small Business Technology Transfer (STTR) Phase I/Phase II project is to develop the ...

Cost-effective and power-efficient radiation tolerant semiconductors are needed in various harsh environments, such as particle detectors, communication satellites, high-altitude avionics and medical imagining equipment. These include amplifiers, voltage regulators, analog-to-digital converters (ADCs) and digital logic circuitry. However, radiation-tolerant high-speed ADCs currently cost more than ...

There are an estimated 1.7 million oil and gas wells in the United States, 771,000 of these are considered marginal producers. Combined they make up 11.3% of the US oil production and 8.3% of the US gas production. In that last 10 years, over 131,000 of these oil wells and 48,000 gas wells have been plugged and abandoned. Most of these wells suffer from paraffin plugging problems. The only way to ...

As the United States aging fleet of nuclear reactors approach the end other their lifetimes, a new generation of nuclear reactors (Generation IV) are being developed to ensure national energy security without emissions or pollutants as a byproduct. However, there are many technological hurdles associated with the extreme corrosive environments required by molten salt reactor designs. This presents ...