You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Performance Optimized Hierarchical Microstructure Propellant for Future Small Interceptor Rocket Motors

    SBC: HELICON CHEMICAL COMPANY LLC            Topic: MDA18004

    Future interceptors would benefit from advanced propulsion capabilities, with higher performance in smaller, volume-constrained systems. Innovative propellant chemistry is needed to enable substantially greater performance in smaller packages. One factor limiting the maximum performance achievable in modern solid propellants is the slow ignition and combustion of the propellant’s metal fuel part ...

    SBIR Phase II 2019 Department of DefenseMissile Defense Agency
  2. Lightweight Gearbox for Air Cushion Vehicles

    SBC: Pratt & Miller Engineering & Fabrication, LLC            Topic: N181072

    The Re-Designed Lightweight Gearbox

    SBIR Phase II 2019 Department of DefenseNavy
  3. Low Cost Laser Communications Ground Terminal Network

    SBC: VISION ENGINEERING SOLUTIONS LLC            Topic: AF191D001

    This SBIR delivers two optical ground stations, based on commercial design, to support experimentation and laser communication with AFRL spacecraft.  These assets facilitate research in flexible space operations, secure low probability of intercept (LPI) communications, and management of shared resources with disparate commercial networks.  The standards based design supports day and night opera ...

    SBIR Phase II 2019 Department of DefenseAir Force
  4. Reverse Engineering and Source Development for F107 Replacement Components

    SBC: MAINSTREAM ENGINEERING CORP            Topic: DLA181007

    The Defense Logistics Agency (DLA) is seeking small businesses capable of manufacturing and supplying an assortment of replacement components for the F107 turbofan engine. The F107 is most commonly used as the propulsion system for cruise missiles. Given the F107’s primary use, maintaining a supply chain capable of keeping the engine in operation is paramount. DLA has stated that the F107 engine ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  5. Micro Identification Friend or Foe (IFF)

    SBC: R CUBED ENGINEERING LLC            Topic: N142102

    Development of a small UAS compatible Micro IFF transponder including Modes 1,2,3A,C,S , Dual band ADS-B, UAT, Mode 5 and interrogator. All modes include both receive (in) and transmit (out). Size is less than 8 cu inches and weight is under 6 oz with full AIMS 17-1000 compliance, including 500 watt output with diversity. Unit is also low cost and low maintenance. Unit meets full military temperat ...

    SBIR Phase II 2019 Department of DefenseNavy
  6. Dual Plane 3D Compton Scattering Imager with Pixelated CZT Detectors for 1-10MeV Gamma Ray

    SBC: H3D INC            Topic: None

    Phase I has proven that the current setup achieves better than 8mm spatial resolution for 2.2MeV prompt gammas. However, 1mm spatial resolution presents a significant challenge for the current setup due in part to limited timing resolution and count rate. A new analog ASIC will be developed to replace the current analog ASIC that will have better timing resolution and deliver higher count rates. I ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  7. High Power Density Aircraft Power Factor Correction

    SBC: MAINSTREAM ENGINEERING CORP            Topic: N181005

    The goal of this proposal is to develop a passive power factor corrector (PFC) suitable to be installed into military combat aircraft. The proposed PFC design weighs less than 20 lbs, can utilize either forced or natural convection cooling, and can operate in ambient temperatures as high as 71 °C. During the Phase I Mainstream built and tested a PFC device that met or exceeded all of the specifie ...

    SBIR Phase II 2019 Department of DefenseNavy
  8. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: Made In Space, Inc.            Topic: DLA181002

    Made In Space, Inc. (MIS) proposes an Aulë Filament Inspection System (AFIS) to provide filament quality control capability for additive manufacturing (AM). AFIS enables the Defense Logistics Agency (DLA) to confidently support AM efforts both internal to DLA and throughout its customer base such as the Marine Corp Advanced Manufacturing Operations Cell. To create the product quality line system, ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  9. Direct to Phase II Open Topic: Open Call for Innovative Defense-Related Dual-Purpose Technologies/Solutions with a Clear Air Force Stakeholder Need

    SBC: IMMERSIVE WISDOM INC            Topic: AF192D001

    Today’s Air Force missions are dependent on physically separated personnel and a complex flow of never ending data from a growing number of sources across multiple domains including cyber, FMV, GEOINT, sensor platforms, and more. Existing collaboration capabilities used to communicate, analyze, and act are disjointed, inefficient and unable to keep pace with operational demands making it im ...

    SBIR Phase II 2019 Department of DefenseAir Force
  10. Direct to Phase II Open Topic: Open Call for Innovative Defense-Related Dual-Purpose Technologies/Solutions with a Clear Air Force Stakeholder Need

    SBC: Gapingvoid Culture Design Group LLC            Topic: AF192D001

    AFWERX and AFGSC have entered into a MOU to run a Culture of Innovation Project throughout the entire organization for all 10 Air Force Bases over a 20 month period. The goal of this project will be to leverage and enhance the existing work within AFGSC to create innovative leaders providing safe, secure and lethal combat-ready forces for nuclear and conventional global strike today and tomorrow. ...

    SBIR Phase II 2019 Department of DefenseAir Force
US Flag An Official Website of the United States Government