Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Dual Plane 3D Compton Scattering Imager with Pixelated CZT Detectors for 1-10MeV Gamma Ray

    SBC: H3D            Topic: None

    Phase I has proven that the current setup achieves better than 8mm spatial resolution for 2.2MeV prompt gammas. However, 1mm spatial resolution presents a significant challenge for the current setup due in part to limited timing resolution and count rate. A new analog ASIC will be developed to replace the current analog ASIC that will have better timing resolution and deliver higher count rates. I ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  2. Coal-Core Composites for Low Cost, Light Weight, Fire-Resistant Panels and Roofing Materials

    SBC: Semplastics EHC LLC            Topic: 18c

    Two main problems are targeted by the proposed work: (1) the underutilization of coal, a valuable natural resource, has led to a catastrophic drop in employment within the coal industry ecosystem in specific geographic areas in the country; and (2) the need within the insurance-driven roof replacement market for a suitable, light weight, low cost, high durability roofing material.These problems wi ...

    SBIR Phase II 2019 Department of Energy
  3. Hydrothermal Liquefaction of Food Waste and Remediation of Aqueous Byproducts

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: 10b

    Thermochemical processing via hydrothermal liquefaction (HTL) is capable of processing a broad range of feedstocks, has a favorable net energy ratio, and produces an energy-dense liquid biooil product.However, there is an obstacle with current HTL processes that has hampered the adoption of this technology—the HTL process produces a considerable amount of aqueous organic byproducts and HTL oil r ...

    SBIR Phase II 2019 Department of Energy
  4. A Corrosion Test Station for Improved Characterization and Examination Capabilities of Advanced Nuclear Reactor Fuels and Materials

    SBC: Niowave, Inc.            Topic: 30i

    Liquid-metal coolants are one of the most promising solutions for the challenges of advanced high temperature nuclear reactor systems.They optimize heat transfer, neutronics, safety, and compactness of the reactor systems.Molten lead and lead-bismuth eutectic (LBE) are the primary coolant candidates due to their unique thermo-mechanical and neutronics properties.However, they are highly corrosive ...

    STTR Phase II 2019 Department of Energy
  5. CO2 to Chemicals: A Hybrid Process for Bioproduct Synthesis From CO2

    SBC: Dioxide Materials DBA Dioxide Recycle            Topic: 16b

    The chemical industry is seeking new domestic feedstocks that are independent of imported oil. Waste CO2 is an abundant and low-cost domestic source of carbon for making chemicals but there is a need for new technologies to cost-effectively capture and convert CO2 into useful materials. The objective of this project will be to develop an economically viable process that converts waste CO2 from sou ...

    SBIR Phase II 2019 Department of Energy
  6. Dissimilar Metal Bonding of Corrosion-Resistant Cladding to Structural Materials in Next-Generation Nuclear Reactors

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: 13a

    As the United States aging fleet of nuclear reactors approach the end other their lifetimes, a new generation of nuclear reactors (Generation IV) are being developed to ensure national energy security without emissions or pollutants as a byproduct. However, there are many technological hurdles associated with the extreme corrosive environments required by molten salt reactor designs. This presents ...

    SBIR Phase II 2019 Department of Energy
  7. Next-Generation TechNology for the Extremely Efficient Storage, Distribution, and Processing of Nuclear Physics Data

    SBC: Accelogic, LLC            Topic: 27a

    Millions of dollars are spent every year in generating the tons of data that are necessary for addressing nuclear physics grand challenge problems at DOE facilities. Due to inherent technical and financial limitations at the “last- mile” of the data delivery pipeline, only a small fraction of these expensive Peta bytes of data is available for immediate access by end-users at any given time. T ...

    SBIR Phase II 2019 Department of Energy
  8. Conversion of Coal Wastes and Municipal Solids Mixtures by Pyrolytic Torrefaction and Entrained Flow Gasification

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: 19b

    For the foreseeable future, the Nation’s energy demand will continue to come largely from indigenous fossil energy resources and hydrocarbon fuels. Specifically waste coal plus other opportunity fuels need to be utilized as a feedstock to eliminate a waste stream and optimized to maximize energy yield and cleanly minimize pollutant emissions. Modular equipment is needed for installation in coal ...

    SBIR Phase II 2019 Department of Energy
  9. Ultrafast Electron Microscopy Module to Upgrade Existing Commercial Electron Microscopes

    SBC: Niowave, Inc.            Topic: 11a

    This project will develop a flexible longitudinal electron optical system based on high-precision radio-frequency cavities for short and intense electron bunch compressions, both in the energy and time domains. The proposed system is designed to be inserted into an existing transmission electron microscope column to upgrade its temporal resolution. Active phase-space control enables broad ranges o ...

    SBIR Phase II 2019 Department of Energy
  10. FLASH PROCESSED STEEL FOR AUTOMOTIVE APPLICATIONS

    SBC: SFP WORKS, LLC            Topic: 02b

    The Department of Energy (DOE) has pursued multiple strategies for making vehicles lighter and more fuel efficient. Past efforts have focused on either developing technologies to replace heavy steel components or using high-strength steels to reduce the amount of steel needed for the same load-bearing capacity. However, these techniques have proved problematic because the former requires expensive ...

    SBIR Phase II 2015 Department of Energy
US Flag An Official Website of the United States Government