You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Tools for Parallel Adaptive Simulation of Multiphase Ballistic Flows
SBC: SIMMETRIX, INC. Topic: A15AT002This project will provide state-of-the-art predictive capabilities for simulating systems central to advancing the U.S. Army’s modernization priorities related to long-range precision fires and future vertical lift platforms. The goals of the project are to: (1) Produce geometry and meshing technologies that support the modeling and discretization techniques needed to explicitly track evolving/i ...
STTR Phase II 2019 Department of DefenseArmy -
Dual Plane 3D Compton Scattering Imager with Pixelated CZT Detectors for 1-10MeV Gamma Ray
SBC: H3D INC Topic: NonePhase I has proven that the current setup achieves better than 8mm spatial resolution for 2.2MeV prompt gammas. However, 1mm spatial resolution presents a significant challenge for the current setup due in part to limited timing resolution and count rate. A new analog ASIC will be developed to replace the current analog ASIC that will have better timing resolution and deliver higher count rates. I ...
SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology -
Rapid Flow and Thermal Signature Design
SBC: THERMOANALYTICS INC Topic: A18102The efficient design and evaluation of Army vehicles requires accurate simulation of the factors that affect the vehicle’s infrared signature and thermal conditions inside the vehicle. The model must account for all the transient heat transfer within and outside the vehicle, including heat from the engine, air flow within the engine compartment, exhaust system, ventilation inside the vehicle, th ...
SBIR Phase II 2019 Department of DefenseArmy -
Advanced Artillery & Mortar personnel Blast Gauge System
SBC: Blackbox Biometrics, Inc. Topic: A18078B3 proposes to develop and build a prototype sensor that can be used to track individual BOP exposure from artillery. The technical objectives will be accomplished over a two-year period of performance (PoP), which include the base (Year 1) and option period (Year 2). The base will result in an alpha prototype, of which five (5) sets will be delivered to PEO Ammo. The alpha will be tested using B3 ...
SBIR Phase II 2019 Department of DefenseArmy -
Intelligent Cyber Adversaries Tool Suites (ICATS)
SBC: DIGNITAS TECHNOLOGIES, LLC Topic: A18024Dignitas’ overall objective for Phase II is to enhance Cyber training capabilities by developing the Intelligent Cyber Adversaries Tool Suite (ICATS), a capable and flexible intelligent cyber adversary as a training tool for a target system such as OneSAF while looking forward to plans for next generation training system. ICATS provides automated cyber adversaries that conduct OPFOR defensive an ...
SBIR Phase II 2019 Department of DefenseArmy -
High Temperature Motor Drive
SBC: MAINSTREAM ENGINEERING CORP Topic: A18100Mainstream Engineering has developed a 25 kW continuous, 35 kW peak-SiC based motor drive. The motor drive is cooled by the 105 °C engine coolant, includes an integrated EMI filter for compliance with Mil-Std-461, and includes reverse-polarity protection on both the 600 V power and 28 V control interfaces. The motor drive has a power density of 93 W/in3, weighs less than 12 lbs, and is 99% effici ...
SBIR Phase II 2019 Department of DefenseArmy -
Preview Sensing Suspension
SBC: Pratt & Miller Engineering & Fabrication, LLC Topic: A18098PME proposes to extend the successes of the Phase I work with a Phase II prototyping effort which will demonstrate the feasibility of the approach on an actual vehicle with the controls running in real-time as well as corroborate the simulation results seen in Phase I. An existing vehicle will be up-fit with a preview sensing and active suspension system to characterize the combined system perform ...
SBIR Phase II 2019 Department of DefenseArmy -
High Temperature Wear Coatings for Improving High Output Military Diesel Engine Performance and Durability
SBC: Commodo Materials, LLC Topic: A18099Major benefits in performance, reliability, and sustainment cost have been demonstrated for a decade with a ‘new’ class of piston coatings that by their nature, improve the fit of mating piston to bore surfaces in the race and remanufacturing engine industries. Reliable high output engines are fundamentally limited by thermal and tribological performance of cylinder kit piston-ring-bore materi ...
SBIR Phase II 2019 Department of DefenseArmy -
Intelligent System Architecture for Autonomous Care (ISAAC) Diagnosis Ph II
SBC: SOAR TECHNOLOGY INC Topic: A18063Unmanned systems and autonomous capabilities provide an avenue for improving enroute care in situations where medical evacuation assets are unable to reach the patient. A first step is to explore how intelligent algorithms can be used to supplement the current capabilities by improving the diagnosis combat trauma to support prolonged field care. Variability in the sensing technology available, and ...
SBIR Phase II 2019 Department of DefenseArmy -
Real-time Wastewater Analyzer
SBC: Atlas Scientific LLC Topic: A17087Atlas Scientific is proposing to build a waste water analysis computer system and an imbedded turbidity sensor.
SBIR Phase II 2019 Department of DefenseArmy