Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Developing Silicon Nanowire Sensors to Measuring Host-Cell Proteins at a Biomanufacturing Line

    SBC: Advanced Silicon Group            Topic: None

    Our biosensor is made of silicon nanowire arrays functionalized with antibodies to measure the concentration of specific proteins. In this grant we will take a sensor that has been demonstrated for use in measuring a set of generic host cell proteins and we will apply the sensor to measure a set of proteins for a specific cell line. In doing so, we will demonstrate the utility of our sensor to be ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  2. Dual Plane 3D Compton Scattering Imager with Pixelated CZT Detectors for 1-10MeV Gamma Ray

    SBC: H3D            Topic: None

    Phase I has proven that the current setup achieves better than 8mm spatial resolution for 2.2MeV prompt gammas. However, 1mm spatial resolution presents a significant challenge for the current setup due in part to limited timing resolution and count rate. A new analog ASIC will be developed to replace the current analog ASIC that will have better timing resolution and deliver higher count rates. I ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  3. IF Conversion System for High-Bandwidth Multiplexed Sensors Arrays

    SBC: Alphacore, Inc.            Topic: None

    Alphacore will develop an Intermediate Frequency (IF) Conversion System for High-Bandwidth Multiplexed Sensors Arrays for Phase II of NIST's 2018 soliciation for Exploratory Measurement Science Topic 9.04.02.68.The proposing team has already successfully developed and evaluated a prototype board in Phase I.The goal in Phase II is therefore to achieve three primary objectives:1) Optimize the design ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  4. Advanced Instrumentation for Non-Nulling Stack Velocity Testing

    SBC: AIRFLOW SCIENCES CORPORATION            Topic: None

    Industrial facilities, manufacturing plants, and electric power plants that burn fossil fuels exhaust the combustion products to atmosphere through their smokestacks. Stack pollutant emissions are quantified using manual testing methods developed in the 1960s, which are prone to error if non-axial flow exists in a stack.Recently, NIST has been working on an improved technique of performing 3D flow ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  5. Development of a Neutron-based Nondestructive Test Method for Concrete Petrography and Chemical Analysis

    SBC: TOURNEY CONSULTING GROUP, LLC            Topic: None

    To evaluate the technical feasibility of prompt gamma neutron activation (PGAA) as an alternative to a set of standard destructive tests of concrete petrography including aggregate type, water/cement ratio, aggregate/binder ratio, density, chloride content and chloride bulk diffusion constant; and to determine the specifications for the design of a dedicated commercial laboratory-based PGAA facili ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  6. Category-Theoretic Tool for Manufacturing-related Information Integration

    SBC: CATEGORICAL INFORMATICS, INC.            Topic: 9010173R

    Categorical theory has recently been successfully applied to translate information from one computer system to another. Researchers at MIT have developed a prototype software tool based on category theory for solving information-integration programs. The tool has successfully solved small-scale information-integration problems including a problem identified by NIST about enriching the manufacturin ...

    SBIR Phase I 2015 Department of CommerceNational Institute of Standards and Technology
  7. Combined Extinction/Fluorescence Absorption Diagnostics for Sprays

    SBC: En'urga Inc.            Topic: 9030163R

    This Phase II project will continue the prototype development of a pharmaceutical spray quality audit system. The spray quality audit system will estimate the planar mass distribution, mass flux, and drop size of pharmaceutical sprays that are used in functional coating applications and inhalers. A prototype tomography system will be designed and fabricated and evaluated using various fluorophore.

    SBIR Phase II 2015 Department of CommerceNational Institute of Standards and Technology
  8. Large-Area, High-Uniformity Photodiodes for Infrared Trap Detectors

    SBC: Amethyst Research Incorporated            Topic: 9020168R

    methyst Research Inc. will design, fabricate and test a high uniformity, large area, low noise infrared trap-detector detector for the 1- 4.5 μm wavelength range. This state of the art detector will have a large area (e.g., 1-1.8 cm diameter active area) with a spatial variability of internal quantum efficiency of less than 0.1 % between 1 μm and 4.5 μm. In addition, the internal quantum effici ...

    SBIR Phase I 2015 Department of CommerceNational Institute of Standards and Technology
  9. Phase-Stabilized 1-GHz Fiber-Laser Frequency Combs at 2~5um for Coherent Fourier Transform Spectroscopy

    SBC: AdValue Photonics Inc            Topic: N/A

    The GHz-rate phase-stabilized fiber-laser frequency comb system is proposed to be used as a light source for coherent Fourier transform spectroscopy. The system will be developed based on our proprietary glass/fiber technology, which features a low-cost, robust, highly stable, mid-infrared light source that enables the development of a robust portable c-FTIR spectrometer for absorption measurement ...

    SBIR Phase II 2010 Department of CommerceNational Institute of Standards and Technology
  10. High Speed and High Sensitivity Quadrant Photo Detector

    SBC: Radiation Monitoring Devices, Inc.            Topic: N/A

    To further advance the characterization and utility of microcantilevers, next generation optical detectors with higher frequency response, improved displacement resolution and lower noise for weak signal detection are needed. Consequently, Radiation Monitoring Devices, Inc. (RMD) will develop a turnkey optical detector module for use in characterizing the displacement and resonant frequencies of m ...

    SBIR Phase I 2010 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government