Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. TheSieve

    SBC: Cyber Point International, LLC            Topic: None

    CyberPoint International presents the design of a cross platform product for the autonomous execution of live forensic investigations of Personal Computers, Laptops and Servers leveraging the NIST NSRL corpus and a combination of at least 3 forms of machine learning/artificial intelligent algorithms for the processing of preliminary digital evidence titled TheSieve. We build upon work from our pha ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  2. Dual Plane 3D Compton Scattering Imager with Pixelated CZT Detectors for 1-10MeV Gamma Ray

    SBC: H3D            Topic: None

    Phase I has proven that the current setup achieves better than 8mm spatial resolution for 2.2MeV prompt gammas. However, 1mm spatial resolution presents a significant challenge for the current setup due in part to limited timing resolution and count rate. A new analog ASIC will be developed to replace the current analog ASIC that will have better timing resolution and deliver higher count rates. I ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  3. Advanced Instrumentation for Non-Nulling Stack Velocity Testing

    SBC: AIRFLOW SCIENCES CORPORATION            Topic: None

    Industrial facilities, manufacturing plants, and electric power plants that burn fossil fuels exhaust the combustion products to atmosphere through their smokestacks. Stack pollutant emissions are quantified using manual testing methods developed in the 1960s, which are prone to error if non-axial flow exists in a stack.Recently, NIST has been working on an improved technique of performing 3D flow ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  4. Developing Commercial Quantum Resistance Standard Based on Epitaxial Graphene

    SBC: Graphene Waves, LLC            Topic: None

    Graphene Waves proposes to develop a quantum Hall resistance (QHR) standard based on graphene that can be deployed for general electrical calibration in industries. Current QHR standard is based on GaAs/AlGaAs heterostructure and requires expensive liquid helium to operate. The continuous increase in price and unstable supply chain of liquid helium limit the QHR standard to be only affordable by t ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  5. Development of a Neutron-based Nondestructive Test Method for Concrete Petrography and Chemical Analysis

    SBC: TOURNEY CONSULTING GROUP, LLC            Topic: None

    To evaluate the technical feasibility of prompt gamma neutron activation (PGAA) as an alternative to a set of standard destructive tests of concrete petrography including aggregate type, water/cement ratio, aggregate/binder ratio, density, chloride content and chloride bulk diffusion constant; and to determine the specifications for the design of a dedicated commercial laboratory-based PGAA facili ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  6. Laser Particle Separation

    SBC: Opthos Instrument Company, LLC            Topic: None

    Parman Tech is dedicated to commercializing a NIST technology for sorting nano-particles. This technology uses the force of light to gently guide particles along different paths depending on the size of makeup of each particle.

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  7. High-Throughput Low-Cost Manufacturing of Engineered MRI Contrast Agents

    SBC: Weinberg Medical Physics, Inc.            Topic: 9010368R

    Scalable manufacturing of micro-engineered MRI contrast agents has the potential to increase the specificity and resolution of imaging techniques, while reducing morbidity. Currently, techniques used for making such particles are expensive and labor intensive. In Phase I, Weinberg Medical Physics will validate techniques for rapid, massively parallel fabrication of microscale contrast agents (incl ...

    SBIR Phase I 2015 Department of CommerceNational Institute of Standards and Technology
  8. High Performance Beam Scanning Using a Resonant Scan Lens

    SBC: XSB INC.            Topic: 9050140TT

    The objective of this project is to demonstrate a resonant scan lens (RSL) that increases the uniformity of beam scans projected from resonant optomechanical systems. While resonant optomechanical systems generate high-speed beam scans, large mechanical displacements, and robust operation from miniature form factors, scans projected from such systems lack uniformity across the field-of-view (FOV). ...

    SBIR Phase I 2015 Department of CommerceNational Institute of Standards and Technology
  9. Combined Extinction/Fluorescence Absorption Diagnostics for Sprays

    SBC: En'urga Inc.            Topic: 9030163R

    This Phase II project will continue the prototype development of a pharmaceutical spray quality audit system. The spray quality audit system will estimate the planar mass distribution, mass flux, and drop size of pharmaceutical sprays that are used in functional coating applications and inhalers. A prototype tomography system will be designed and fabricated and evaluated using various fluorophore.

    SBIR Phase II 2015 Department of CommerceNational Institute of Standards and Technology
  10. Large-Area, High-Uniformity Photodiodes for Infrared Trap Detectors

    SBC: Amethyst Research Incorporated            Topic: 9020168R

    methyst Research Inc. will design, fabricate and test a high uniformity, large area, low noise infrared trap-detector detector for the 1- 4.5 μm wavelength range. This state of the art detector will have a large area (e.g., 1-1.8 cm diameter active area) with a spatial variability of internal quantum efficiency of less than 0.1 % between 1 μm and 4.5 μm. In addition, the internal quantum effici ...

    SBIR Phase I 2015 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government