You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Performance Optimized Hierarchical Microstructure Propellant for Future Small Interceptor Rocket Motors
SBC: HELICON CHEMICAL COMPANY LLC Topic: MDA18004Future interceptors would benefit from advanced propulsion capabilities, with higher performance in smaller, volume-constrained systems. Innovative propellant chemistry is needed to enable substantially greater performance in smaller packages. One factor limiting the maximum performance achievable in modern solid propellants is the slow ignition and combustion of the propellant’s metal fuel part ...
SBIR Phase II 2019 Department of DefenseMissile Defense Agency -
Dual Plane 3D Compton Scattering Imager with Pixelated CZT Detectors for 1-10MeV Gamma Ray
SBC: H3D INC Topic: NonePhase I has proven that the current setup achieves better than 8mm spatial resolution for 2.2MeV prompt gammas. However, 1mm spatial resolution presents a significant challenge for the current setup due in part to limited timing resolution and count rate. A new analog ASIC will be developed to replace the current analog ASIC that will have better timing resolution and deliver higher count rates. I ...
SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology -
Advanced Instrumentation for Non-Nulling Stack Velocity Testing
SBC: AIRFLOW SCIENCES CORP Topic: NoneIndustrial facilities, manufacturing plants, and electric power plants that burn fossil fuels exhaust the combustion products to atmosphere through their smokestacks. Stack pollutant emissions are quantified using manual testing methods developed in the 1960s, which are prone to error if non-axial flow exists in a stack.Recently, NIST has been working on an improved technique of performing 3D flow ...
SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology -
Development of a Neutron-based Nondestructive Test Method for Concrete Petrography and Chemical Analysis
SBC: TOURNEY CONSULTING GROUP, LLC Topic: NoneTo evaluate the technical feasibility of prompt gamma neutron activation (PGAA) as an alternative to a set of standard destructive tests of concrete petrography including aggregate type, water/cement ratio, aggregate/binder ratio, density, chloride content and chloride bulk diffusion constant; and to determine the specifications for the design of a dedicated commercial laboratory-based PGAA facili ...
SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology -
An Augmented Reality Sandbox for use in Early Elementary STEM Instruction
SBC: PARAMETRIC STUDIO, INC. Topic: 91990019R0011The team will develop a prototype of an augmented reality (AR) sandbox with foundational learning experiences in engineering and computer science for students in kindergarten to grade 2. The prototype will embed puzzle challenges within the AR interface to facilitate experiences that will mirror traditional real-world play-building activities. At the end of Phase I, in a pilot study in three class ...
SBIR Phase I 2019 Department of EducationInstitute of Education Sciences -
High Performance Cooled Seeker Window
SBC: MAINSTREAM ENGINEERING CORP Topic: MDA17005Infrared (IR) windows operating in the environment experienced by endo-atmospheric interceptors are limited in performance by the high heat fluxes, temperatures, and pressures characteristic of these environments. Window temperature can exceed 900 C from exposure to the high heat fluxes and temperatures associated with hypersonic flight. Existing materials are limited by poor mechanical and optica ...
SBIR Phase II 2019 Department of DefenseMissile Defense Agency -
Advanced Development of Inception Technologies for Requirements Management (ADIT-RM)
SBC: MODUS OPERANDI, INC. Topic: MDA11030Preliminary definition and analysis of Ballistic Missile Defense System (BMDS) requirements in an isolated, manual, and loosely controlled change environment shows significant overlap in effort, resulting in a major increase to cost, schedule, mission classification, subsystem propagation, and trace of system impacts. To assist MDA with movement of BMDS mission objectives to mission requirements, ...
SBIR Phase II 2019 Department of DefenseMissile Defense Agency -
MEMS IMU Solutions for Missile Defense Applications
SBC: EVIGIA SYSTEMS LLC Topic: MDA15026This proposed SBIR Phase II effort continues the development of rugged MEMS inertial measurement units (IMUs) for operation in high shock and vibration operation environment of missiles, and other military and commercial platforms with harsh environment characteristics. The primary outcome of the proposed effort is a 6-axis highly-reliable and durable tactical-grade MEMS IMU with inclusion of vibr ...
SBIR Phase II 2019 Department of DefenseMissile Defense Agency -
Multi-Physics Analysis Tool for High-Energy Gas Lasers
SBC: Material Flow Solutions, Inc. Topic: MDA16T001Based on the results of our Phase I work, one significant barrier to optimizing battery performance lies in understanding the relationship between bulk solids and particle flow properties and the flow into the die. Our hypothesis: an increase in quality batteries production can be achieved if powder preparation process can be optimized and the die filling process controlled. We feel that control o ...
STTR Phase II 2019 Department of DefenseMissile Defense Agency -
Electron Beam Additive Manufacturing of Upper Stage Propellant Tanks
SBC: MAINSTREAM ENGINEERING CORP Topic: MDA18021This program is significant in that it represents a leap forward in electron beam (Ebeam) processes as well as liquid propellant tank designs. Mainstream will demonstrate the technical feasibility of Ebeam additive manufacturing (AM) for upper-stage liquid propellant tanks with Mainstream’s EBEAM facility by fabricating test coupons and subscale prototype components from novel materials. We will ...
SBIR Phase I 2019 Department of DefenseMissile Defense Agency