You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Irradiation, Heat, and Corrosion Resistant Hexagonal Boron Nitride-Cement Coating for Mitigating Aging and Irradiation Effects in Nuclear Power Plants
SBC: C-CRETE TECHNOLOGIES LLC Topic: N/AThe goal of this project is to develop a novel experimental protocol utilizing the fundamentals of cutting-edge materials science, chemistry, and advanced nanoengineering to create a first-of-its-kind multifunctional cementitious coating material that mitigates the detrimental effects of irradiation, heat, and corrosive in nuclear power plants. Capitalizing on our promising preliminary results, th ...
SBIR Phase II 2019 Department of EnergyARPA-E -
Irradiation, Heat, and Corrosion Resistant Hexagonal Boron Nitride-Cement Coating for Mitigating Aging and Irradiation Effects in Nuclear Power Plants
SBC: C-CRETE TECHNOLOGIES LLC Topic: N/AThe goal of this project is to develop a novel experimental protocol utilizing the fundamentals of cutting-edge materials science, chemistry, and advanced nanoengineering to create a first-of-its-kind multifunctional cementitious coating material that mitigates the detrimental effects of irradiation, heat, and corrosive in nuclear power plants. Capitalizing on our promising preliminary results, th ...
SBIR Phase I 2019 Department of EnergyARPA-E -
Dual Plane 3D Compton Scattering Imager with Pixelated CZT Detectors for 1-10MeV Gamma Ray
SBC: H3D INC Topic: NonePhase I has proven that the current setup achieves better than 8mm spatial resolution for 2.2MeV prompt gammas. However, 1mm spatial resolution presents a significant challenge for the current setup due in part to limited timing resolution and count rate. A new analog ASIC will be developed to replace the current analog ASIC that will have better timing resolution and deliver higher count rates. I ...
SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology -
Multimode Chiroptical Spectrometer for Nanoparticle Characterization
SBC: APPLIED NANOFLUORESCENCE, LLC Topic: NoneThis project will develop a new scientific instrument optimized for the advanced characterization of near-infrared fluorescent nanoparticles that can exist as left- or right-handed structures (enantiomers). Single-walled carbon nanotubes (SWCNTs) are the leading current example of such nanomaterials. Applied NanoFluorescence, LLC (ANF) proposes a novel multi-mode chiroptical spectrometer that can ...
SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology -
Coal-Core Composites for Low Cost, Light Weight, Fire-Resistant Panels and Roofing Materials
SBC: SEMPLASTICS EHC LLC Topic: 18cTwo main problems are targeted by the proposed work: (1) the underutilization of coal, a valuable natural resource, has led to a catastrophic drop in employment within the coal industry ecosystem in specific geographic areas in the country; and (2) the need within the insurance-driven roof replacement market for a suitable, light weight, low cost, high durability roofing material.These problems wi ...
SBIR Phase II 2019 Department of Energy -
Inline Robot for Inspecting and Repairing Leaks in Pipeline and Preventing Methane Emissions
SBC: ULC TECHNOLOGIES LLC Topic: 19aWith a vast network of over 400 thousand miles of transmission pipeline and over one million miles of aging distribution pipeline in the U.S., it is a huge endeavor to continuously monitor pipeline integrity, detect leaks, and repair leaks.Conventional methods to repair leaks are labor intensive and could take many hours during which there are chances for leak propagation, excessive release of met ...
SBIR Phase II 2019 Department of Energy -
Development of a Profiling Microwave Radiometer for Offshore Wind Farms, Further Characterization of Marine Atmospheric Boundary Layer
SBC: BOULDER ENVIRONMENTAL SCIENCES AND TECHNOLOGY, LLC Topic: 16aThe life expectancy of offshore wind turbines is at least 20 years, during which they must operate optimally with respect to power production, minimization of mechanical stresses, plant wake distribution, and more, in a range of atmospheric conditions.These conditions are currently observed using meteorological masts, which provide inadequate observations, thus resulting in suboptimal turbine desi ...
SBIR Phase II 2019 Department of Energy -
Stable, Low-Loss Joints for HTS Fusion Magnets
SBC: ADVANCED CONDUCTOR TECHNOLOGIES LLC Topic: 22cThe feasibility of fusion as a practical energy source needs to be improved significantly by removing some of the restrictions that low-temperature superconductors put on the fusion magnet systems.One method to simplify the magnet system is by using high-temperature superconductors (HTS) that allow for a higher magnet performance and much larger temperature margins.Successful application of HTS in ...
SBIR Phase II 2019 Department of Energy -
High Temperature Operable, Harsh Environment Tolerant Flow Sensors for Nuclear Reactor Applications
SBC: SPORIAN MICROSYSTEMS, INC Topic: 32kA commonly noted sensor need for nuclear power systems is flow sensing in the various heat transfer mediums and to monitor medium velocities and characterize mixing and/or cooling.This is particularly needed for small modular reactors (SMR) and molten salt reactors (MSR).Such sensors must be able to tolerate high temperatures, high pressures, highly corrosive liquids, and radiation (neutron and ga ...
SBIR Phase II 2019 Department of Energy -
Front End for Advanced Laser Driver for ICF Driver
SBC: Aqwest, LLC Topic: 22aAqwest LLC proposes to further develop a "Front End" laser for an advanced inertial fusion energy (IFE) laser driver, integrate it with final amplifier (FA) modules developed by Aqwest for the Department of Energy (DOE), and conduct a parametric test evaluation.The development and commercialization of IFE is impeded by the lack of efficient and economical laser driver.IFE offers to tap almost unli ...
SBIR Phase II 2019 Department of Energy