You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Performance Optimized Hierarchical Microstructure Propellant for Future Small Interceptor Rocket Motors
SBC: HELICON CHEMICAL COMPANY LLC Topic: MDA18004Future interceptors would benefit from advanced propulsion capabilities, with higher performance in smaller, volume-constrained systems. Innovative propellant chemistry is needed to enable substantially greater performance in smaller packages. One factor limiting the maximum performance achievable in modern solid propellants is the slow ignition and combustion of the propellant’s metal fuel part ...
SBIR Phase II 2019 Department of DefenseMissile Defense Agency -
Reverse Engineering and Source Development for F107 Replacement Components
SBC: MAINSTREAM ENGINEERING CORP Topic: DLA181007The Defense Logistics Agency (DLA) is seeking small businesses capable of manufacturing and supplying an assortment of replacement components for the F107 turbofan engine. The F107 is most commonly used as the propulsion system for cruise missiles. Given the F107’s primary use, maintaining a supply chain capable of keeping the engine in operation is paramount. DLA has stated that the F107 engine ...
SBIR Phase II 2019 Department of DefenseDefense Logistics Agency -
Lightweight Structural Components of a Missile Body
SBC: TEXAS RESEARCH INSTITUTE , AUSTIN, INC. Topic: MDA17T004A significant weight reduction on missile platforms could increase maneuverability of the payload and allow more capable payloads. High temperature composite materials offer the means by which low cost and lighter weight missile structures can be achieved. Approved for Public Release 19-MDA-10203 (4 Sep 19)
STTR Phase II 2019 Department of DefenseMissile Defense Agency -
Advanced Cyber Threat Intelligence and Vulnerability Analysis Training Environment (ACTIVATE)
SBC: KNOWLEDGE BASED SYSTEMS INC Topic: MDA18001Knowledge Based Systems, Inc. (KBSI) will design and demonstrate an Advanced Cyber Threat Intelligence and Vulnerability Analysis Training Environment (ACTIVATE) framework that directly targets the need for advanced cyber network defense training. The proposed new enabling capability will support cyber training against an intelligent red team to enhance cyber operator trainee cyber-attack recognit ...
SBIR Phase II 2019 Department of DefenseMissile Defense Agency -
Dual Plane 3D Compton Scattering Imager with Pixelated CZT Detectors for 1-10MeV Gamma Ray
SBC: H3D INC Topic: NonePhase I has proven that the current setup achieves better than 8mm spatial resolution for 2.2MeV prompt gammas. However, 1mm spatial resolution presents a significant challenge for the current setup due in part to limited timing resolution and count rate. A new analog ASIC will be developed to replace the current analog ASIC that will have better timing resolution and deliver higher count rates. I ...
SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology -
Multimode Chiroptical Spectrometer for Nanoparticle Characterization
SBC: APPLIED NANOFLUORESCENCE, LLC Topic: NoneThis project will develop a new scientific instrument optimized for the advanced characterization of near-infrared fluorescent nanoparticles that can exist as left- or right-handed structures (enantiomers). Single-walled carbon nanotubes (SWCNTs) are the leading current example of such nanomaterials. Applied NanoFluorescence, LLC (ANF) proposes a novel multi-mode chiroptical spectrometer that can ...
SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology -
Additive Manufacturing Process Monitoring and Control Technologies
SBC: Made In Space, Inc. Topic: DLA181002Made In Space, Inc. (MIS) proposes an Aulë Filament Inspection System (AFIS) to provide filament quality control capability for additive manufacturing (AM). AFIS enables the Defense Logistics Agency (DLA) to confidently support AM efforts both internal to DLA and throughout its customer base such as the Marine Corp Advanced Manufacturing Operations Cell. To create the product quality line system, ...
SBIR Phase II 2019 Department of DefenseDefense Logistics Agency -
Gap-Free Model-Based Engineering for Manufacturing and Analysis: Digital Thread without Translation
SBC: Nvariate, Inc. Topic: NoneModern Model-Based Enterprise / Engineering (MBE) systems rely on freeform surfaces built as complex combinations of geometric primitives to define engineered objects. Unfortunately, the intersection of freeform surfaces in MBE applications results in highly approximated solutions, degrading models that cost billions annually by US industry to fix. Current technology limits the abilities of users ...
SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology -
Advanced Instrumentation for Non-Nulling Stack Velocity Testing
SBC: AIRFLOW SCIENCES CORP Topic: NoneIndustrial facilities, manufacturing plants, and electric power plants that burn fossil fuels exhaust the combustion products to atmosphere through their smokestacks. Stack pollutant emissions are quantified using manual testing methods developed in the 1960s, which are prone to error if non-axial flow exists in a stack.Recently, NIST has been working on an improved technique of performing 3D flow ...
SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology -
Advanced Manufacturing and Material Measurements Software Tool Weave ™ for the Acceleration and Automation of SEM Image Analysis in the Semiconductor Industry
SBC: Sandbox Semiconductor Incorporated Topic: NoneIn this Phase I SBIR proposal, SandBox Semiconductor™ proposes to develop an Advanced Manufacturing and Material Measurements software tool called Weave ™ for accelerating and automating SEM image analysis for the semiconductor industry. During the development of a new manufacturing process line for a semiconductor device, tens of thousands of scanning electron microscopy (SEM) images are take ...
SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology