You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY20 is not expected to be complete until September, 2021.

  1. Reverse Engineering and Source Development for F107 Replacement Components

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DLA181007

    The Defense Logistics Agency (DLA) is seeking small businesses capable of manufacturing and supplying an assortment of replacement components for the F107 turbofan engine. The F107 is most commonly used as the propulsion system for cruise missiles. Given the F107’s primary use, maintaining a supply chain capable of keeping the engine in operation is paramount. DLA has stated that the F107 engine ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  2. Dual Plane 3D Compton Scattering Imager with Pixelated CZT Detectors for 1-10MeV Gamma Ray

    SBC: H3D            Topic: None

    Phase I has proven that the current setup achieves better than 8mm spatial resolution for 2.2MeV prompt gammas. However, 1mm spatial resolution presents a significant challenge for the current setup due in part to limited timing resolution and count rate. A new analog ASIC will be developed to replace the current analog ASIC that will have better timing resolution and deliver higher count rates. I ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  3. Multimode Chiroptical Spectrometer for Nanoparticle Characterization

    SBC: Applied Nanofluorescence LLC            Topic: None

    This project will develop a new scientific instrument optimized for the advanced characterization of near-infrared fluorescent nanoparticles that can exist as left- or right-handed structures (enantiomers). Single-walled carbon nanotubes (SWCNTs) are the leading current example of such nanomaterials. Applied NanoFluorescence, LLC (ANF) proposes a novel multi-mode chiroptical spectrometer that can ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  4. Additive Manufacturing Process Monitoring and Control Technologies

    SBC: Made In Space, Inc.            Topic: DLA181002

    Made In Space, Inc. (MIS) proposes an Aulë Filament Inspection System (AFIS) to provide filament quality control capability for additive manufacturing (AM). AFIS enables the Defense Logistics Agency (DLA) to confidently support AM efforts both internal to DLA and throughout its customer base such as the Marine Corp Advanced Manufacturing Operations Cell. To create the product quality line system, ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  5. Gap-Free Model-Based Engineering for Manufacturing and Analysis: Digital Thread without Translation

    SBC: Nvariate, Inc.            Topic: None

    Modern Model-Based Enterprise / Engineering (MBE) systems rely on freeform surfaces built as complex combinations of geometric primitives to define engineered objects. Unfortunately, the intersection of freeform surfaces in MBE applications results in highly approximated solutions, degrading models that cost billions annually by US industry to fix. Current technology limits the abilities of users ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  6. Advanced Instrumentation for Non-Nulling Stack Velocity Testing

    SBC: AIRFLOW SCIENCES CORPORATION            Topic: None

    Industrial facilities, manufacturing plants, and electric power plants that burn fossil fuels exhaust the combustion products to atmosphere through their smokestacks. Stack pollutant emissions are quantified using manual testing methods developed in the 1960s, which are prone to error if non-axial flow exists in a stack.Recently, NIST has been working on an improved technique of performing 3D flow ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  7. Advanced Manufacturing and Material Measurements Software Tool Weave ™ for the Acceleration and Automation of SEM Image Analysis in the Semiconductor Industry

    SBC: Sandbox Semiconductor Incorporated            Topic: None

    In this Phase I SBIR proposal, SandBox Semiconductor™ proposes to develop an Advanced Manufacturing and Material Measurements software tool called Weave ™ for accelerating and automating SEM image analysis for the semiconductor industry. During the development of a new manufacturing process line for a semiconductor device, tens of thousands of scanning electron microscopy (SEM) images are take ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  8. Development of a Neutron-based Nondestructive Test Method for Concrete Petrography and Chemical Analysis

    SBC: TOURNEY CONSULTING GROUP, LLC            Topic: None

    To evaluate the technical feasibility of prompt gamma neutron activation (PGAA) as an alternative to a set of standard destructive tests of concrete petrography including aggregate type, water/cement ratio, aggregate/binder ratio, density, chloride content and chloride bulk diffusion constant; and to determine the specifications for the design of a dedicated commercial laboratory-based PGAA facili ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  9. SGSI and FLOLS Lens Development and Source Approval

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DLA172001

    In Phase II, Mainstream will continue development efforts for several lenses used in the stabilized glide slope indicator (SGSI) system and Fresnel lens optical landing system (FLOLS). Mainstream produced prototype clear acrylic lenticular lenses prototypes that passed optical tests performed by the engineering support activity (ESA) at NAWCADLKE in Phase I. Mainstream will develop conformal color ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
  10. Source Approval for Hard-to-Source Items

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DLA172002

    Additional sources of supply are desired by the Defense Logistics Agency for Land and Maritime hard-to-source items, as well as critical application and safety items (CAI/CSI) for Aircraft Launch and Recovery Equipment (ALRE). Mainstream has carefully reviewed the requirements provided in the technical data packages for several NSNs and determined that they fit within our manufacturing capabilitie ...

    SBIR Phase II 2019 Department of DefenseDefense Logistics Agency
US Flag An Official Website of the United States Government