List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Dual Plane 3D Compton Scattering Imager with Pixelated CZT Detectors for 1-10MeV Gamma Ray

    SBC: H3D            Topic: None

    Phase I has proven that the current setup achieves better than 8mm spatial resolution for 2.2MeV prompt gammas. However, 1mm spatial resolution presents a significant challenge for the current setup due in part to limited timing resolution and count rate. A new analog ASIC will be developed to replace the current analog ASIC that will have better timing resolution and deliver higher count rates. I ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  2. Multimode Chiroptical Spectrometer for Nanoparticle Characterization

    SBC: Applied Nanofluorescence LLC            Topic: None

    This project will develop a new scientific instrument optimized for the advanced characterization of near-infrared fluorescent nanoparticles that can exist as left- or right-handed structures (enantiomers). Single-walled carbon nanotubes (SWCNTs) are the leading current example of such nanomaterials. Applied NanoFluorescence, LLC (ANF) proposes a novel multi-mode chiroptical spectrometer that can ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  3. Advanced Instrumentation for Non-Nulling Stack Velocity Testing

    SBC: AIRFLOW SCIENCES CORPORATION            Topic: None

    Industrial facilities, manufacturing plants, and electric power plants that burn fossil fuels exhaust the combustion products to atmosphere through their smokestacks. Stack pollutant emissions are quantified using manual testing methods developed in the 1960s, which are prone to error if non-axial flow exists in a stack.Recently, NIST has been working on an improved technique of performing 3D flow ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  4. Advanced Manufacturing and Material Measurements Software Tool Weave ™ for the Acceleration and Automation of SEM Image Analysis in the Semiconductor Industry

    SBC: Sandbox Semiconductor Incorporated            Topic: None

    In this Phase I SBIR proposal, SandBox Semiconductor™ proposes to develop an Advanced Manufacturing and Material Measurements software tool called Weave ™ for accelerating and automating SEM image analysis for the semiconductor industry. During the development of a new manufacturing process line for a semiconductor device, tens of thousands of scanning electron microscopy (SEM) images are take ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  5. Development of a Neutron-based Nondestructive Test Method for Concrete Petrography and Chemical Analysis

    SBC: TOURNEY CONSULTING GROUP, LLC            Topic: None

    To evaluate the technical feasibility of prompt gamma neutron activation (PGAA) as an alternative to a set of standard destructive tests of concrete petrography including aggregate type, water/cement ratio, aggregate/binder ratio, density, chloride content and chloride bulk diffusion constant; and to determine the specifications for the design of a dedicated commercial laboratory-based PGAA facili ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  6. Gap-Free Model-Based Engineering for Manufacturing and Analysis: Digital Thread without Translation

    SBC: Nvariate, Inc.            Topic: None

    Modern Model-Based Enterprise / Engineering (MBE) systems rely on freeform surfaces built as complex combinations of geometric primitives to define engineered objects. Unfortunately, the intersection of freeform surfaces in MBE applications results in highly approximated solutions, degrading models that cost billions annually by US industry to fix. Current technology limits the abilities of users ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  7. Knowledge-aided Interface for Big Data Streams

    SBC: SECURBORATION, INC.            Topic: OSD13LD2

    Big data challenges across Department of Defense (DOD) domains are increasingly problematic for tactical level decision making. Data collections in the open source and military channels are growing at such a staggering rate that it exceeds our ability to store and manage, perform computation and analysis, and maintain data security [1, 2]. Indeed, one author refers to the inability to handle big ...

    SBIR Phase II 2015 Department of DefenseOffice of the Secretary of Defense
  8. APU Silencing Technology Development

    SBC: Great Lakes Sound & Vibration, Inc.            Topic: OSD10EP3

    The proposed effort will result in an "universal" fan noise cancellation system for use with high performance fans used extensively in defense applications including auxiliary power unit (APU) applications. Fans are a critical noise source that impact the audible detection range of the platform. The importance of the fan noise for detection continues to increase as other technology improvements ...

    SBIR Phase II 2015 Department of DefenseOffice of the Secretary of Defense
  9. FieldOps: A Unified Approach to UGV Interface Design, Sensor Data Compression, and Supervisory Control Based on Fields of Safe Travel

    SBC: Quantum Signal LLC            Topic: OSD13HS3

    This topic addresses the problem of robustly commanding and controlling unmanned ground vehicles operating in complex, unstructured environments. Current approaches to this task rely on dense scene reconstruction from a variety of sensor data such as LIDAR and video imagery. Scene representations are then relayed to a remote human operator who provides commands at varying levels of supervisory con ...

    SBIR Phase II 2015 Department of DefenseOffice of the Secretary of Defense
  10. Advanced Heavy Fuel Injection System for UAS/UGS Applications

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: OSD13PR1

    This effort is to develop a fast responding, light weight, direct injection system to operate within the fuels ignition delay time for UAS/UGS application. These systems must be applicable to engines that are 200 HP or less, either reciprocating or rotary. A technical challenge associated with the conversion of gasoline engines to heavy fuel (JP-8) is the avoidance of knock. An approach used to ...

    SBIR Phase II 2015 Department of DefenseOffice of the Secretary of Defense

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government