You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Acoustic Signature Reduction

    SBC: TEXAS HIGH ENERGY MATERIALS, LLC            Topic: SOCOM163001

    Audible noise generated from propeller driven aircraft has been extensively studied by aero acoustic scientists and engineers. Manned aircraft and Small Unmanned Aircraft Systems are being fielded by SOCOM for unique missions. Detrimental noise inherent to propeller driven aircraft signals approach and location, which then compromises personnel, payload, the aircraft, and mission success. Our nov ...

    SBIR Phase I 2017 Department of DefenseSpecial Operations Command
  2. Additive Manufacturing of Long Rod Penetrator Sabots using Carbon Nanotube Metal Matrix Composites

    SBC: SHEPRA, INC.            Topic: A17033

    Additive Manufacturing has the potential to dramatically reduce the weight and cost of long rod penetrator sabots if the right material systems can be utilized in manufacturing. While short fiber polymer composites offer significant weight and cost savings, they are limited in their maximum mechanical performance and cannot meet the specific stiffness and specific strength objectives of this progr ...

    SBIR Phase I 2017 Department of DefenseArmy
  3. Advanced and Additive Manufacturing of Nanostructured Ballistic Alloys

    SBC: MAINSTREAM ENGINEERING CORP            Topic: A16065

    There is an urgent need to improve protection of our soldiers without losing mobility and maneuverability. As personal protection equipment becomes more sophisticated and multifunctional for protection against ballistics, shrapnel, and stabbing, it has also become heavier and more cumbersome. This additional mass can inhibit troop movement and potentially compromise the mission and even survivabil ...

    SBIR Phase I 2017 Department of DefenseArmy
  4. ADVANCED FACILITIES TO EXPEDITE DESIGN AND EVALUATION OF COMMUNICATIONS SYSTEMS

    SBC: Information Research            Topic: N/A

    THE TECHNICAL OBJECTIVE OF THIS PROJECT IS TO ESTABLISH THE FEASILBILITY OF SATISFYING THE REQUIREMENTS OF THE U.S. ARMY COMMUNICATIONS ELECTRONICS COMMAND (CECOM) FOR RAPID AND EFFECTIVE MODELING OF U.S. ARMY COMMUNICATION SYSTEMS. THE METHOD WE PROPOSE FOR SATISFYING THESE REQUIREMENTS IS TO ADAPT A TOP-DOWN DESIGN SYSTEM FOR ELECTRONIC SYSTEMS BEING DEVELOPED FOR THE U.S. NAVY TO MODEL-ING OF C ...

    SBIR Phase I 1987 Department of DefenseArmy
  5. ADVANCED FACILITIES TO EXPEDITE DESIGN AND EVALUATION OF PACKET SWITCHED SYSTEMS

    SBC: PREDICTION SYSTEMS INC            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseArmy
  6. Advanced Manufacturing and Material Measurements Software Tool Weave ™ for the Acceleration and Automation of SEM Image Analysis in the Semiconductor Industry

    SBC: Sandbox Semiconductor Incorporated            Topic: None

    In this Phase I SBIR proposal, SandBox Semiconductor™ proposes to develop an Advanced Manufacturing and Material Measurements software tool called Weave ™ for accelerating and automating SEM image analysis for the semiconductor industry. During the development of a new manufacturing process line for a semiconductor device, tens of thousands of scanning electron microscopy (SEM) images are take ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  7. Advanced Microscale Aluminum Heat Exchanger

    SBC: MAINSTREAM ENGINEERING CORP            Topic: A19077

    This proposal uses a novel architecture to build a heat exchanger that vehicle heat rejection by 5% while maintaining the same space claim and pressure drop as legacy systems. The novel design results in a substantial decrease in the pressure drop and an increase in thermal performance relative to state-of-the-art configurations. Conventional high volume component production methods will be combin ...

    SBIR Phase I 2019 Department of DefenseArmy
  8. Advanced, Robust, and Simple Pretreatment to Reverse Osmosis

    SBC: FILTRATION SOLUTIONS, INC.            Topic: A15089

    The objective of this proposal is to demonstrate the feasibility of an innovative design that combines cross-flow filtration (CFF) and Dean Flow surface cleaning to achieve an effective self-cleaning filtration for Armys RO pretreatment. CFF is especially effective for feed flow with a high amount of colloidal solids that are commonly found in surface water. Unlike dead-end filtration, the surface ...

    SBIR Phase I 2015 Department of DefenseArmy
  9. Advanced, Robust, and Simple Pretreatment to Reverse Osmosis

    SBC: FILTRATION SOLUTIONS, INC.            Topic: A15089

    The objective of this proposal is to continue the development of an innovative filter design that combines cross-flow filtration, Dean Flow surface cleaning, a coiled tubular membrane filter (TMF), and an unhoused membrane module into an advanced, robust and simple reverse osmosis pretreatment system. Dean Flow is a secondary flow with a dual vortex form. The vortex profile generates a high shear ...

    SBIR Phase II 2017 Department of DefenseArmy
  10. ADVANCED SENSORS FOR CLOSE PROXIMITY ROBOTIC MINE DETECTION

    SBC: Coleman Research Corp.            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseArmy
US Flag An Official Website of the United States Government