You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Gap-Free Model-Based Engineering for Manufacturing and Analysis: Digital Thread without Translation

    SBC: Nvariate, Inc.            Topic: None

    Modern Model-Based Enterprise / Engineering (MBE) systems rely on freeform surfaces built as complex combinations of geometric primitives to define engineered objects. Unfortunately, the intersection of freeform surfaces in MBE applications results in highly approximated solutions, degrading models that cost billions annually by US industry to fix. Current technology limits the abilities of users ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  2. Advanced Manufacturing and Material Measurements Software Tool Weave ™ for the Acceleration and Automation of SEM Image Analysis in the Semiconductor Industry

    SBC: Sandbox Semiconductor Incorporated            Topic: None

    In this Phase I SBIR proposal, SandBox Semiconductor™ proposes to develop an Advanced Manufacturing and Material Measurements software tool called Weave ™ for accelerating and automating SEM image analysis for the semiconductor industry. During the development of a new manufacturing process line for a semiconductor device, tens of thousands of scanning electron microscopy (SEM) images are take ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  3. Front End of Line and Back End of Line Layer Fabrication Partitioning for the Purpose of Design Intellectual Property (IP) Protection

    SBC: MAXENTRIC TECHNOLOGIES LLC            Topic: DMEA182002

    To meet the demands of the DMEA182-002 SBIR solicitation (“Front End of Line and Back End of Line Layer Fabrication Partitioning for the Purpose of Design Intellectual Property Protection”), the MaXentric and UCLA team proposes the HIGHFIVE (Heterogeneous Integration Guideline Highlighting Fabrication of Information Veiled Electronics), which provides a practical verification flow using the c ...

    SBIR Phase I 2019 Department of DefenseDefense Microelectronics Activity
  4. Integration, Verification &Validation for E2E Capability Evaluation for BMDS (INVICTUS)

    SBC: KNOWLEDGE BASED SYSTEMS INC            Topic: MDA18009

    In order to address various issues relating to digital element integration and execution for large-scale end-to-end capability evaluation of the Ballistic Missile Defense System (BMDS), Knowledge Based Systems, Inc. (KBSI) proposes to conduct research and development leading to the Integration, Verification &Validation for E2E Capability Evaluation for BMDS (INVICTUS) framework and supporting disc ...

    SBIR Phase I 2019 Department of DefenseMissile Defense Agency
  5. Methodologies for Cost-Effective Measurement of Dynamic Material Properties for Carbon-Carbon Composites

    SBC: PROTECTION ENGINEERING CONSULTANTS LLC            Topic: MDA18010

    Explosions and high-velocity impacts can create strain rates up to 106 s-1 in carbon-carbon composites (CCC). To simulate these events, first-principles codes require material models that are valid at these loading rates. Currently, the amount of test data, material models and material constants for this strain rate range is extremely limited, and an innovative and cost-effective laboratory test p ...

    SBIR Phase I 2019 Department of DefenseMissile Defense Agency
  6. Advanced Flash III-V LADAR Camera

    SBC: PRINCETON INFRARED TECHNOLOGIES INC            Topic: MDA18018

    This research will develop a 128x128 on 30 µm pixel pitch radiation hardened Laser Detection and Ranging (LADAR) system for spaced-based long range imaging. This advanced LADAR system will be integrated with an InGaAsP-based linear-mode Avalanche Photodiodes (APDs) optimized for 1.06 µm operation. Studies will be completed to optimize the APD structure for radiation hardness, achieving gains ...

    SBIR Phase I 2019 Department of DefenseMissile Defense Agency
  7. Pulsed Helicon Onboard Exo-Atmospheric Beam Emitter (PHOEBE) w/ magnetic nozzle for beam focusing, collimating, and steering

    SBC: LYNNTECH INC.            Topic: MDA18019

    Intercontinental Ballistic Missiles (ICBMs) fired at the United States can be destroyed during their midcourse coast phase by an exo-atmospheric neutral beam of high velocity particles. Lynntech will determine the feasibility of modifying a TRL 5 magnetoplasma engine into a neutral beam emitter. Modification of the magnetic coil geometry and strength will be investigated to focus, collimate, and s ...

    SBIR Phase I 2019 Department of DefenseMissile Defense Agency
  8. High Power and High Energy Internal Nanohybrid Battery-Capacitor (InterNano BatCap) for Space Applications

    SBC: LYNNTECH INC.            Topic: MDA18020

    To meet the current and future power needs for space applications in Low Earth Orbit (LEO), high power and high energy storage technologies are necessary. Lithium-ion batteries have sufficient energy density to store energy in between solar charging, yet reduced performance at high rates of discharge and short cycle life. Ultracapacitors can operate efficiently at high rates of discharge, but lack ...

    SBIR Phase I 2019 Department of DefenseMissile Defense Agency
  9. Electron Beam Additive Manufacturing of Upper Stage Propellant Tanks

    SBC: MAINSTREAM ENGINEERING CORP            Topic: MDA18021

    This program is significant in that it represents a leap forward in electron beam (Ebeam) processes as well as liquid propellant tank designs. Mainstream will demonstrate the technical feasibility of Ebeam additive manufacturing (AM) for upper-stage liquid propellant tanks with Mainstream’s EBEAM facility by fabricating test coupons and subscale prototype components from novel materials. We will ...

    SBIR Phase I 2019 Department of DefenseMissile Defense Agency
  10. Innovative Mobile Launch Platform

    SBC: Arrow Science And Technology, LLC            Topic: MDA18022

    Arrow Science and Technology is beginning with a generic concept as the basis for establishing a comprehensive set of Analysis of Alternatives (AoAs) leading to the baseline design of a Multi-Mode Platform System (MMPS). The MMPS will serve as a common platform system across air, sea, and ground launch systems. Through the use of cannister or sabot elements, the MMPS will be capable of launch all ...

    SBIR Phase I 2019 Department of DefenseMissile Defense Agency
US Flag An Official Website of the United States Government