Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Multimode Chiroptical Spectrometer for Nanoparticle Characterization

    SBC: Applied Nanofluorescence LLC            Topic: None

    This project will develop a new scientific instrument optimized for the advanced characterization of near-infrared fluorescent nanoparticles that can exist as left- or right-handed structures (enantiomers). Single-walled carbon nanotubes (SWCNTs) are the leading current example of such nanomaterials. Applied NanoFluorescence, LLC (ANF) proposes a novel multi-mode chiroptical spectrometer that can ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  2. Progressive Model Generation for Adaptive Resilient System SoftwareDigital Thread Modeling Environment (DTME)

    SBC: SECURBORATION, INC.            Topic: N13AT014

    The ability to align Digital Threads (DT) to Digital Twins (DTw) is a critical component required to achieve reduction in total ownership cost of current and future Air Force (AF) programs. The connecting of the DT to the DTw is a key requirement to achieve model-based system engineering. One can view the connection between DT and DTw as the ability to develop robust models of the real-world syste ...

    STTR Phase II 2019 Department of DefenseAir Force
  3. Bonded Joint Analysis Method

    SBC: Global Engineering and Materials, Inc.            Topic: N12AT004

    Global Engineering and Materials, Inc. (GEM) along with its team member National Institute for Aviation Research (NIAR) at Wichita State University will further extend and validate CB2ATA (Composite Bolted and Bonded Analysis Toolkit for Abaqus) under multiaxial fatigue loading using cruciform specimens and a Triton wing section. A combined numerical and experimental study will be performed to det ...

    STTR Phase II 2019 Department of DefenseNavy
  4. Additive Manufacturing for Naval Aviation Battery Applications

    SBC: Texas Research Institute, Austin, Inc.            Topic: N18AT008

    Texas Research Austin (TRI-Austin) will continue to partner with the University of Texas, Austin, to use additive manufacturing for fabricating and optimizing the lithium ion and electroactive metal electrode systems for which the team established proof of concept in the Phase I base period. The Aerosol Deposition Method (ADM) is a broadly applicable additive manufacturing technology that has been ...

    STTR Phase II 2019 Department of DefenseNavy
  5. Information-based Norms on Flow, Operations and Traffic Over Networks (INFOTON)

    SBC: ISEA TEK, LLC            Topic: N18AT027

    The Internet of Things (IoT) connects people, data, and "things" (e.g., software, sensors, platforms), facilitating the translation of information into actions. Although naval platforms networks and communication suites have evolved significantly in the past few years to support such required connectivity, one of the greatest technical challenges still facing the military community is the processi ...

    STTR Phase II 2019 Department of DefenseNavy
  6. Reusable Pilot Vehicle Interface (PVI) Components and Widgets using ARINC 661 and FACE Architectures

    SBC: ART OFFICE CORP.            Topic: A17082

    Attempts to reuse modern graphical software applications are met with difficulty because avionics applications are typically developed with a specific platform in mind; in these instances, portability is an afterthought. This proposal provides a solution for prioritizing and maximizing the reuse of graphical avionics systems by detailing an innovative software development process and reference arc ...

    SBIR Phase II 2019 Department of DefenseArmy
  7. Improved Ship and Small Boat Classification Using Hybrid Synthetic Aperture Radar- Inverse Synthetic Aperture Radar (SAR-ISAR) Imaging

    SBC: RDRTec Incorporated            Topic: N112119

    RDRTec's baseline Maritime Classification Aid (MCA) system relies heavily on the use of profile view ISAR dwells to perform target classification. The ability to accurately estimate a targets aspect angle is important to classification performance as ship length is a major discriminant and aspect angle is required to translate measure projected target length to ship length. Two important categorie ...

    SBIR Phase II 2019 Department of DefenseNavy
  8. Prototyping of GPS Interference Mitigation Module

    SBC: Qunav LLC            Topic: A17119

    Phase II effort will develop and implement an embedded prototype of GPS Interference Mitigation Module (GIMM) as a tailored design of the overall Exploitation of Discrete GPS Interference for Enhanced Navigation (EDGE) technology toward a higher potential for transitioning to fielded systems. Phase II will build on Phase I algorithmic components and their feasibility demonstration results. Main ob ...

    SBIR Phase II 2019 Department of DefenseArmy
  9. High Speed Missile to Missile Communications

    SBC: Cesiumastro Inc.            Topic: MDA17001

    High Speed Missile to Missile Communications.Approved for Public Release | 19-MDA-9932 (21 Feb 19)

    SBIR Phase II 2019 Department of DefenseMissile Defense Agency
  10. Health Monitoring System for Constant Speed Drives

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: AF172004

    The Air Force is seeking a self-contained, self-powered device to be installed within their constant speed drives (CSDs) that can monitor the drives health by performing functions such as counting input shaft rotations, measuring temperature, and monitoring for dangerous vibrations.During Phase I Mainstream Engineering designed and built hardware that demonstrated the feasibility of incorporating ...

    SBIR Phase II 2019 Department of DefenseAir Force
US Flag An Official Website of the United States Government