You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. High Power Density Dual Rotor Permanent Magnet Motor with Integrated Cooling and Drive for Aircraft Propulsion

    SBC: Advanced Magnet Lab, Inc.            Topic: 1

    There is a critical need for electrification of transportation systems. The proposed technology enables the development of very high-power density permanent magnet motors, which when coupled to an integrated SiC drive allows for an overall specific power beyond 12 kW/kg. The proposed concept relies on the tight integration of a high-power density dual-rotor permanent magnet motor, high power densi ...

    STTR Phase II 2020 Department of EnergyARPA-E
  2. High Power Density Dual Rotor Permanent Magnet Motor with Integrated Cooling and Drive for Aircraft Propulsion

    SBC: Advanced Magnet Lab, Inc.            Topic: 1

    There is a critical need for electrification of transportation systems. The proposed technology enables the development of very high-power density permanent magnet motors, which when coupled to an integrated SiC drive allows for an overall specific power beyond 12 kW/kg. The proposed concept relies on the tight integration of a high-power density dual-rotor permanent magnet motor, high power densi ...

    STTR Phase II 2020 Department of EnergyARPA-E
  3. Extremely Lightweight Fuel Cell Based Power Supply System for Commercial Aircrafts

    SBC: Fuceltech Inc            Topic: 1

    Fuceltech proposes to develop a low cost lightweight Energy Storage and Power Generation (ESPG) system for commercial aircrafts in the ARPA-E REEACH program. Fuceltech will develop a single fuel cell (5kW to be developed in the program and potentially as high as 10kW from a single cell) and a novel stacking approach which can be used to deliver hundreds of kW or MWs of power from a single small an ...

    SBIR Phase II 2020 Department of EnergyARPA-E
  4. High Power Density Dual Rotor Permanent Magnet Motor with Integrated Cooling and Drive for Aircraft Propulsion

    SBC: Advanced Magnet Lab, Inc.            Topic: 1

    There is a critical need for electrification of transportation systems. The proposed technology enables the development of very high-power density permanent magnet motors, which when coupled to an integrated SiC drive allows for an overall specific power beyond 12 kW/kg. The proposed concept relies on the tight integration of a high-power density dual-rotor permanent magnet motor, high power densi ...

    STTR Phase I 2020 Department of EnergyARPA-E
  5. Nanoionics Enabled Proton Conducting Ionomers

    SBC: CELADYNE TECHNOLOGIES, INC.            Topic: G

    Celadyne Technologies will develop an innovative elevated temperature proton conducting ionomer material. The team improves upon existing technology relying on acid-base chemistry in favor of an approach driven by defect chemistry and interfacial nanoionic interactions. The technology could improve efficiency in proton exchange membrane fuel cells and electrolyzers and reduce CO2 emissions.

    SBIR Phase II 2020 Department of EnergyARPA-E
  6. Extremely Lightweight Fuel Cell Based Power Supply System for Commercial Aircrafts

    SBC: Fuceltech Inc            Topic: 1

    Fuceltech proposes to develop a low cost lightweight Energy Storage and Power Generation (ESPG) system for commercial aircrafts in the ARPA-E REEACH program. Fuceltech will develop a single fuel cell (5kW to be developed in the program and potentially as high as 10kW from a single cell) and a novel stacking approach which can be used to deliver hundreds of kW or MWs of power from a single small an ...

    SBIR Phase I 2020 Department of EnergyARPA-E
  7. Irradiation, Heat, and Corrosion Resistant Hexagonal Boron Nitride-Cement Coating for Mitigating Aging and Irradiation Effects in Nuclear Power Plants

    SBC: C-CRETE TECHNOLOGIES LLC            Topic: N/A

    The goal of this project is to develop a novel experimental protocol utilizing the fundamentals of cutting-edge materials science, chemistry, and advanced nanoengineering to create a first-of-its-kind multifunctional cementitious coating material that mitigates the detrimental effects of irradiation, heat, and corrosive in nuclear power plants. Capitalizing on our promising preliminary results, th ...

    SBIR Phase II 2019 Department of EnergyARPA-E
  8. Improved Nodule Collector Design to Mitigate Sediment Plumes

    SBC: DEEP REACH TECHNOLOGY INC            Topic: G

    Seabed mining may be the best option to fill the impending gap in terrestrial supplies for nickel, cobalt, and rare earth elements, which are increasingly used to manufacture electric vehicles and large lithium-ion batteries. Deep Reach Technology will design a novel nodule collector to minimize the impact of sediment plumes, which may disperse and cover the seabed beyond the mining area. The proj ...

    SBIR Phase II 2020 Department of EnergyARPA-E
  9. Advanced Manufacturing and Material Measurements Software Tool WEAVE for the Accelerating and Automation of SEM image analysis in the Semiconductor Industry

    SBC: Sandbox Semiconductor Incorporated            Topic: 90

    The goal of this proposal is to create the software Weave™ to automate the extraction of critical dimensions (CDs) from scanning electron microscope (SEM) images for the microelectronics industry. Current best practices for extraction of CDs are that personnel analyze the images one by one, which is tedious, prone to human bias, time-consuming and expensive. Successful implementation of Weave™ ...

    SBIR Phase II 2020 Department of CommerceNational Institute of Standards and Technology
  10. Watertight CAD for Integrating Isogeometric Analysis into the Model-Based Enterprise

    SBC: Nvariate, Inc.            Topic: 90

    Today’s Computer-Aided Design (CAD) applications utilize restrictive mathematical assumptions to approximate the compound geometric intersections necessary to represent real-world products. As a result, critical information is not represented within the Model-Based Definition (MBD) for downstream users in the digital thread, forcing engineers to manually repair CAD models and convert them into d ...

    SBIR Phase II 2020 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government