Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. .50 Caliber Light Weight Precision Ammunition

    SBC: PCP TACTICAL, LLC            Topic: SOCOM13006

    The A606 round is the current round of choice for sniper operations using the M107 or MK-15 weapons platforms.The A606 round was designed as an anti-materiel munitions, is not overly accurate (estimated 2 Minute of Angle), and is heavy (every two rounds weigh approximately a pound).(For example, the M107 weighs 36 pounds and 50 rounds of ammunition weigh 25 additional pounds for a total of 61 poun ...

    SBIR Phase II 2015 Department of DefenseSpecial Operations Command
  2. 28GHz-43GHz Nadir/Near-Nadir (~70-90 degrees wrt horizontal) Low Probability of Intercept Radio Frequency Direction Finding/GeoLocation Capability

    SBC: Mustang Technology Group, L.P.            Topic: N102118

    Mustang proposes an innovative antenna system that combines a planar phased array with 4 channel digital processing to produce direction finding in both azimuth and elevation.

    SBIR Phase I 2010 Department of DefenseNavy
  3. 3D Memristor Architectures for Software Defined Radio

    SBC: Privatran, LLC            Topic: N093222

    PrivaTran proposes the use of newly-developed manufacturing methods that convert materials commonly found in conventional integrated circuit (IC) manufacturing into memristor devices with increased packing density and an advanced, three-dimensional (3D) architecture. The memristor devices can be formed in the interconnect layers of a conventional IC so that the area available for underlying transi ...

    SBIR Phase I 2010 Department of DefenseNavy
  4. 3D Printed Clothing Ensembles for The Next Generation Navy Uniform

    SBC: Lynntech Inc.            Topic: N143128

    3D Printing provides unique opportunity to use digital models for production of physical objects. The advancement in 3D Printing led to utilization of the technology in various fields such as automotive, medical, and aerospace. With decline of the cost on 3D printers and expansion of the material selection, new application areas of this unique technology have been emerging. One of these emerging a ...

    SBIR Phase I 2015 Department of DefenseNavy
  5. 4-Quadrant GaN Based Battery Isolator Unit

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: A15084

    Current military vehicles use battery-isolating diodes to transfer current between two sets of battery banks, which are heavy, inefficient, and only allow current flow from the higher charged (higher voltage) battery to the other. This proposal details efforts to develop a bi-directional dc-dc converter for military vehicles to allow for smart control of current transfer between battery banks, as ...

    SBIR Phase I 2015 Department of DefenseArmy
  6. 90nm Low-Power Radiation-Hardened Metal-Programmable System-on-a-Chip

    SBC: Silicon Space Technology Corporation            Topic: AF083189

    Silicon Space Technology (SST) working with Texas Instruments (TI) proposes to demonstrate a 90nm low-power radiation-hardened (RH) metal-programmable system-on-a-chip (SOC) cell library. This will be accomplished by defining, designing, simulating and laying out a demonstration circuit that could eventually be turned into a commercial product. A base slice will be developed upon which the demonst ...

    SBIR Phase II 2010 Department of DefenseAir Force
  7. A Compact Visual-Odometry Sensor for UGVs

    SBC: Traclabs Inc.            Topic: A09203

    Small, Unmanned Ground Vehicles (UGV) will play a significant role in future army applications including reconnaissance, mine detection, explosive ordnance disposal and resupply. Typically, a UGV operates in concert with other agents, including: UGVs, humans, and/or manned vehicles. To successfully navigate in the field, UGVs require reliable odometry. Mechanical odometry is fraught with wheel sli ...

    SBIR Phase I 2010 Department of DefenseArmy
  8. A Fast-Response, Electronically Controlled Fuel Injection System for Small Heavy Fuel Engines with Multi-Fuel Capabilities

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: N10AT033

    Advances in electronically controlled injection technologies for diesel engines have provided a method to improve medium- to heavy-duty engine performance through increased injection pressures, multiple injections, and injection rate shaping. Although these injection systems have been primarily limited to larger engines, the ability to rapidly and precisely meter fuel for smaller engines is partic ...

    STTR Phase I 2010 Department of DefenseNavy
  9. A Field Deployable MDA Analyzer

    SBC: Lynntech Inc.            Topic: AF191028

    Trace level metals such as copper in aviation turbine fuel can significantly accelerate thermal instability of the fuel, leading to oxidation and production of detrimental insoluble deposits in the engine.The primary method of correcting the issue is through the addition of a metal deactivator additive (MDA) into the fuel.Because of its surface activity and adsorptive properties, MDA may be reduce ...

    SBIR Phase I 2019 Department of DefenseAir Force
  10. A Framework for Developing Micro-Games for Preventive Medicine

    SBC: ARCHIE MD INC.            Topic: OSD08H04

    During Phase I, ArchieMD develop a mission-oriented, maze-based framework for developing a SCORM compliant, web-deliverable micro-games that could teach key points of preventive medicine for arthropod-borne diseases. Using this framework we developed a prototype game - Beat the Baghdad Boil, designed to reduce leishmaniasis

    SBIR Phase II 2010 Department of DefenseAir Force
US Flag An Official Website of the United States Government