Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. A novel enhanced-performance low-cost receiver and modified modulation scheme for WWVB

    SBC: XW, LLC dba Xtendwave            Topic: N/A

    The development of a greatly enhanced receiver for the WWVB signal is targeted, as well as possible modifications in the transmitted signal, which would both offer significant improvements in its effective coverage. This is to be achieved while allowing the replacement of the bulky, expensive, ferrite-based antenna, commonly used in the receiver, with a novel lower-cost antenna. Furthermore, the p ...

    SBIR Phase I 2010 Department of CommerceNational Institute of Standards and Technology
  2. Actuating muscle for sustainable, minimally invasive energy harvesting

    SBC: Lynntech Inc.            Topic: SB143001

    Chronically implanted neural electrodes are becoming increasingly relevant a number of medical conditions ranging from the treatment of neurological disorders like epilepsy, Alzheimers, and Parkinsons disease as well as being used for brain machine inte

    SBIR Phase I 2015 Department of DefenseDefense Advanced Research Projects Agency
  3. Advanced Development for Defense Science and Technology

    SBC: Texas Research Institute, Austin, Inc.            Topic: SB082007

    Emerging combat conditions require new multifunctional fiber materials, associated composite systems and processing techniques to be developed starting now. As envisioned, these materials cannot be based on incremental gains made using current technology, but major leaps forward arising from completely new fiber technologies. TRI/Austin recently conceived of a novel material, which it believes i ...

    SBIR Phase II 2010 Department of DefenseDefense Advanced Research Projects Agency
  4. Advanced Manufacturing and Material Measurements Software Tool Weave ™ for the Acceleration and Automation of SEM Image Analysis in the Semiconductor Industry

    SBC: Sandbox Semiconductor Incorporated            Topic: None

    In this Phase I SBIR proposal, SandBox Semiconductor™ proposes to develop an Advanced Manufacturing and Material Measurements software tool called Weave ™ for accelerating and automating SEM image analysis for the semiconductor industry. During the development of a new manufacturing process line for a semiconductor device, tens of thousands of scanning electron microscopy (SEM) images are take ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  5. APPLICATION OF VLSI TO VECTOR ACCUMULATORS AND INTEGRATING TIME TO DIGITAL CONVERTER

    SBC: Ionwerks, Inc.            Topic: N/A

    DESIGN, SIMULATION, FABRICATION, AND EVALUATION OF A PROTOTYPE VERY LARGE SCALE INTEGRATION (VLSI) DATA ACQUISITION SUBSYSTEM IS PROPOSED. AVAILABLE STATE-OF-THE-ART ONE MICRON CMOS TECHNOLOGY MAY ALLOW INCORPORATION OF MORE THAN 128 CHANNELS OF 24-BIT 300 MHZ COUNTERS INTO A SINGLE INTEGRATED CIRCUIT. A PROTOTYPE SYSTEM OF SIMPLE REPEATED CELLS OF COUNTERS, CONTROL AND I/O BUFFERS HAS BEEN DESIGN ...

    SBIR Phase I 1987 Department of DefenseDefense Advanced Research Projects Agency
  6. AURA – Ascertaining Un-Reported Affect

    SBC: DEUMBRA, INC.            Topic: SB101002

    Intelligent Tutoring Systems (ITSs) functions as virtual tutors that adapt to student responses. Such ITSs, however, do not yield student learning improvements equivalent to students tutored by human instructors. Ascertaining Un-Reported Affect (AURA) is a closed-loop, platform-independent “front-end” for informing ITSs with near real-time inferences of student engagement and affect during lea ...

    SBIR Phase I 2010 Department of DefenseDefense Advanced Research Projects Agency
  7. Collaborative Interference Cancellation for Group Communications

    SBC: Qunav LLC            Topic: SB151005

    To meet the critical need for military wireless communications to take place over large distances in the presence of interference, we propose to develop a collaborative group navigation and communication (COGNAC) system that will enable mobile platforms to collaboratively null interference in order to communicate from one collaboration group to another in anti-access/area denial (A2/AD) environmen ...

    SBIR Phase I 2015 Department of DefenseDefense Advanced Research Projects Agency
  8. Compact photonic sensor system for rapid biological threat detection

    SBC: Resonant Sensors Incorporated            Topic: SB093010

    The objective of this work is development of a new sensor system to rapidly detect and diagnose biological threats to the public, including microbial and toxic agents. A unique, new photonic resonance sensor concept implemented with subwavelength waveguide gratings is applied to monitor each detection event in real-time. Due to inherent polarization diversity, multiple resonance peaks shift their ...

    SBIR Phase I 2010 Department of DefenseDefense Advanced Research Projects Agency
  9. Design and Fabrication Techniques for 3-Dimensional Integrated Circuits

    SBC: GOOFYFOOT LABS LLC            Topic: SB091008

    The 3-D integration of systems through monolithic wafer stacking is an emerging technology that can alleviate power, delay, and area problems for digital circuits and can enable a host of new applications in the system on a chip design space. Currently, CAD tools for 3-D integration are severely lacking stagnating potentially explosive growth of the technology. GoofyFoot Labs proposes TESI3d, a ...

    SBIR Phase II 2010 Department of DefenseDefense Advanced Research Projects Agency
  10. Dual Use 3Df Cyber Manufacturing

    SBC: nScrypt, Inc.            Topic: SB102005

    The nScrypt/UTEP team proposes to develop a revolutionary 3Df monolithic cyber manufacturing process that holds great promise for transforming printed manufacturing. This new approach of cyber manufacturing leverages and pushes the limits of graphical design and digital additive manufacturing. We are truly in the digital age in which the youth are savvy with digital technology. Through the late ...

    SBIR Phase I 2010 Department of DefenseDefense Advanced Research Projects Agency
US Flag An Official Website of the United States Government