You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Fulcrum Biometrics' Plan for Research and Development of WS-BD Conformant Handheld Fingerprint Sensor
SBC: Fulcrum Biometrics, LLC Topic: N/ATrusted biometric validation of individual identities has never been more important. Several contributing factors are the increase in global terrorism, identity theft and the increase in legislation which are driving the accelerated adoption of biometric technology. Unfortunately, the biometrics industry has not actively responded to the changing market conditions being driven by the explosion in ...
SBIR Phase I 2012 Department of CommerceNational Institute of Standards and Technology -
Light-weight Low-volume High Oxygen Storage Density Material for Self-Contained Breathing Apparatus
SBC: MAINSTREAM ENGINEERING CORP Topic: CBD12105This proposal details the method of fabrication for a hierarchical hybrid nanomaterial for oxygen storage vessels. These vessels exceed the volumetric and gravimetric storage capacity of an oxygen cylinder by 330% and 215%, respectively. It is estimated that this oxygen storage device will weigh about 12% of a standard low pressure 2216 psi O2 cylinder and be only 4% of the total volume. The oxyg ...
SBIR Phase I 2012 Department of DefenseOffice for Chemical and Biological Defense -
Large-Area, High-Uniformity Photodiodes for Infrared Trap Detectors
SBC: AMETHYST RESEARCH INC Topic: 9020168Rmethyst Research Inc. will design, fabricate and test a high uniformity, large area, low noise infrared trap-detector detector for the 1- 4.5 μm wavelength range. This state of the art detector will have a large area (e.g., 1-1.8 cm diameter active area) with a spatial variability of internal quantum efficiency of less than 0.1 % between 1 μm and 4.5 μm. In addition, the internal quantum effici ...
SBIR Phase I 2015 Department of CommerceNational Institute of Standards and Technology -
Burkholderia antibody molecules for therapeutics and diagnostics
SBC: BIOO SCIENTIFIC CORPORATION Topic: CBD14105Burkholderia pseudomallei and Burkholderia mallei are highly pathogenic Gram - negative bacteria and the causative agents of melioidosis and glanders, respectively. These infections, which occur in humans and other animals, are endemic is wide regions of the developing world. This Phase II SBIR project will build on the success of our Phase I work, which established methods for generating monoclon ...
SBIR Phase II 2015 Department of DefenseOffice for Chemical and Biological Defense -
Precision 10 kV Programmable Voltage Source
SBC: Low Thermal Electronics, Inc. Topic: NALow Thermal Electronics, Inc. proposes to design a stand-alone, programmable voltage source capable of supplying precision voltages in the range of zero to 1,000 volts direct current (DC), with options for scaling up to 10,000 volts, and with a total expanded uncertainty (k=2) of less than 10uV/V for the 10,000 volt version. This instrument will improve state-of-the-art measurements in high resist ...
SBIR Phase I 2017 Department of CommerceNational Institute of Standards and Technology -
Fiber Pigtailed On-Chip Mid-infrared Difference Frequency Generation in Silicon
SBC: OMEGA OPTICS, INC. Topic: NAWe propose a fiber-pigtailed strained silicon platform for tunable difference frequency generation (DFG) in mid-infrared (MIR) with tunable continuous wave near-infrared (NIR) sources. Stress exerted by silicon nitride induces second-order nonlinear susceptibility c(2) on underlying centro-symmetric silicon. NIR light is coupled into silicon and MIR light is coupled out of silicon using sub-wavele ...
SBIR Phase II 2017 Department of CommerceNational Institute of Standards and Technology -
Synergistic and Smart Micro-Controls for Enhanced SCBA Equipment
SBC: MAINSTREAM ENGINEERING CORP Topic: CBD14103The technology pathway to transition the successful CO2 removal system into small-scale production, and address technical hurdles associated with manufacturing, is outlined in this proposal. The electrochemical CO2 removal system generates no heat as it separates CO2 from the humid breathing gas mixture. In parallel, a breath monitoring micro-sensor array to measure temperature, humidity, CO2, and ...
SBIR Phase II 2017 Department of DefenseOffice for Chemical and Biological Defense -
Gap-Free Model-Based Engineering for Manufacturing and Analysis: Digital Thread without Translation
SBC: Nvariate, Inc. Topic: NoneModern Model-Based Enterprise / Engineering (MBE) systems rely on freeform surfaces built as complex combinations of geometric primitives to define engineered objects. Unfortunately, the intersection of freeform surfaces in MBE applications results in highly approximated solutions, degrading models that cost billions annually by US industry to fix. Current technology limits the abilities of users ...
SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology -
Advanced Instrumentation for Non-Nulling Stack Velocity Testing
SBC: AIRFLOW SCIENCES CORP Topic: NoneIndustrial facilities, manufacturing plants, and electric power plants that burn fossil fuels exhaust the combustion products to atmosphere through their smokestacks. Stack pollutant emissions are quantified using manual testing methods developed in the 1960s, which are prone to error if non-axial flow exists in a stack.Recently, NIST has been working on an improved technique of performing 3D flow ...
SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology -
Dual Plane 3D Compton Scattering Imager with Pixelated CZT Detectors for 1-10MeV Gamma Ray
SBC: H3D INC Topic: NonePhase I has proven that the current setup achieves better than 8mm spatial resolution for 2.2MeV prompt gammas. However, 1mm spatial resolution presents a significant challenge for the current setup due in part to limited timing resolution and count rate. A new analog ASIC will be developed to replace the current analog ASIC that will have better timing resolution and deliver higher count rates. I ...
SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology