Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Anion Exchange Resin for Chirality-based Separation of Single-wall Carbon Nanotubes

    SBC: Sepax Technologies, Inc.            Topic: N/A

    Sepax Technologies, Inc. has identified a new type of anoin-exchange resin which separates single-wall carbon nanotubes (SWCNTs) with >80% recovery yield and resolves in a single pass the chiral tubes of (6,5) well from commercial SWCNT starting materials by Chromatography. Improvement and scale up of the targeted resin production will facilitate the separation of chiral nanotubes for the academic ...

    SBIR Phase II 2012 Department of CommerceNational Institute of Standards and Technology
  2. Fulcrum Biometrics' Plan for Research and Development of WS-BD Conformant Handheld Fingerprint Sensor

    SBC: Fulcrum Biometrics, LLC            Topic: N/A

    Trusted biometric validation of individual identities has never been more important. Several contributing factors are the increase in global terrorism, identity theft and the increase in legislation which are driving the accelerated adoption of biometric technology. Unfortunately, the biometrics industry has not actively responded to the changing market conditions being driven by the explosion in ...

    SBIR Phase I 2012 Department of CommerceNational Institute of Standards and Technology
  3. Large-Area, High-Uniformity Photodiodes for Infrared Trap Detectors

    SBC: AMETHYST RESEARCH INCORPORATED            Topic: 9020168R

    methyst Research Inc. will design, fabricate and test a high uniformity, large area, low noise infrared trap-detector detector for the 1- 4.5 μm wavelength range. This state of the art detector will have a large area (e.g., 1-1.8 cm diameter active area) with a spatial variability of internal quantum efficiency of less than 0.1 % between 1 μm and 4.5 μm. In addition, the internal quantum effici ...

    SBIR Phase I 2015 Department of CommerceNational Institute of Standards and Technology
  4. Precision 10 kV Programmable Voltage Source

    SBC: Low Thermal Electronics, Inc.            Topic: NA

    Low Thermal Electronics, Inc. proposes to design a stand-alone, programmable voltage source capable of supplying precision voltages in the range of zero to 1,000 volts direct current (DC), with options for scaling up to 10,000 volts, and with a total expanded uncertainty (k=2) of less than 10uV/V for the 10,000 volt version. This instrument will improve state-of-the-art measurements in high resist ...

    SBIR Phase I 2017 Department of CommerceNational Institute of Standards and Technology
  5. Recovery of Rhenium from Superalloy Scrap

    SBC: Lynntech Inc.            Topic: OSD12T04

    Due to the limited amount of rhenium present in the earths crust (approximately 1-2 part per billion) there is a significant benefit to be realized in recovering for reuse the rhenium from scrap material, spent catalysts, or end-of-life superalloys. Rhenium is found in molybdenum-copper porphyry deposits. If rhenium is present in ore that is processed, it will show up in the resulting molybdenum ...

    STTR Phase II 2015 Department of DefenseOffice of the Secretary of Defense
  6. Advanced Simulation Framework for the Mesoscale Dynamics of Heterogeneous Explosives

    SBC: Streamline Numerics, Inc.            Topic: OSD09W04

    The proposed work seeks to develop a computational tool to conduct sophisticated and realistic computational modeling of the mesoscale dynamics of heterogeneous energetic materials/high explosives (HEs) under the effects of imposed loads. Designing propulsion devices and munitions for precise operational performance demands comprehensive understanding and manipulation of the spatial and temporal d ...

    SBIR Phase II 2012 Department of DefenseOffice of the Secretary of Defense
  7. Countermeasures to Malicious Hardware to Improve Software Protection Systems

    SBC: Clear Hat Consulting, Inc.            Topic: OSD10IA1

    The availability and low cost of COTS software and hardware components has resulted in their deployment across a wide array of critical defense and industry applications. Clear Hat focused their Phase 1 effort on developing countermeasures for malicious hard disk firmware. Although we will continue our research and development of technologies designed to ensure the integrity of disk drive firmware ...

    SBIR Phase II 2012 Department of DefenseOffice of the Secretary of Defense
  8. Advanced Heavy Fuel Injection System for UAS/UGS Applications

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: OSD13PR1

    This effort is to develop a fast responding, light weight, direct injection system to operate within the fuels ignition delay time for UAS/UGS application. These systems must be applicable to engines that are 200 HP or less, either reciprocating or rotary. A technical challenge associated with the conversion of gasoline engines to heavy fuel (JP-8) is the avoidance of knock. An approach used to ...

    SBIR Phase II 2015 Department of DefenseOffice of the Secretary of Defense
  9. Knowledge-aided Interface for Big Data Streams

    SBC: SECURBORATION, INC.            Topic: OSD13LD2

    Big data challenges across Department of Defense (DOD) domains are increasingly problematic for tactical level decision making. Data collections in the open source and military channels are growing at such a staggering rate that it exceeds our ability to store and manage, perform computation and analysis, and maintain data security [1, 2]. Indeed, one author refers to the inability to handle big ...

    SBIR Phase II 2015 Department of DefenseOffice of the Secretary of Defense
  10. Advanced Manufacturing and Material Measurements Software Tool Weave ™ for the Acceleration and Automation of SEM Image Analysis in the Semiconductor Industry

    SBC: Sandbox Semiconductor Incorporated            Topic: None

    In this Phase I SBIR proposal, SandBox Semiconductor™ proposes to develop an Advanced Manufacturing and Material Measurements software tool called Weave ™ for accelerating and automating SEM image analysis for the semiconductor industry. During the development of a new manufacturing process line for a semiconductor device, tens of thousands of scanning electron microscopy (SEM) images are take ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government