Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Fulcrum Biometrics' Plan for Research and Development of WS-BD Conformant Handheld Fingerprint Sensor

    SBC: Fulcrum Biometrics, LLC            Topic: N/A

    Trusted biometric validation of individual identities has never been more important. Several contributing factors are the increase in global terrorism, identity theft and the increase in legislation which are driving the accelerated adoption of biometric technology. Unfortunately, the biometrics industry has not actively responded to the changing market conditions being driven by the explosion in ...

    SBIR Phase I 2012 Department of CommerceNational Institute of Standards and Technology
  2. Large-Area, High-Uniformity Photodiodes for Infrared Trap Detectors

    SBC: AMETHYST RESEARCH INCORPORATED            Topic: 9020168R

    methyst Research Inc. will design, fabricate and test a high uniformity, large area, low noise infrared trap-detector detector for the 1- 4.5 μm wavelength range. This state of the art detector will have a large area (e.g., 1-1.8 cm diameter active area) with a spatial variability of internal quantum efficiency of less than 0.1 % between 1 μm and 4.5 μm. In addition, the internal quantum effici ...

    SBIR Phase I 2015 Department of CommerceNational Institute of Standards and Technology
  3. Precision 10 kV Programmable Voltage Source

    SBC: Low Thermal Electronics, Inc.            Topic: NA

    Low Thermal Electronics, Inc. proposes to design a stand-alone, programmable voltage source capable of supplying precision voltages in the range of zero to 1,000 volts direct current (DC), with options for scaling up to 10,000 volts, and with a total expanded uncertainty (k=2) of less than 10uV/V for the 10,000 volt version. This instrument will improve state-of-the-art measurements in high resist ...

    SBIR Phase I 2017 Department of CommerceNational Institute of Standards and Technology
  4. A Model-Based Solution to Improve the Accessibility and Affordability of Manufacturing System Simulations

    SBC: MBSE Tools, Inc.            Topic: NA

    The vision is to provide decision-makers with effective, fast, and inexpensive analysis tools to answer "What-If" and "What-Should" questions about manufacturing systems. Value Stream Mapping (VSM) is a modeling methodology with widespread contemporary use in manufacturing, and our strategy is to start with VSM as a deployment beachhead for the eventual deployment of a more generic manufacturing s ...

    SBIR Phase I 2017 Department of CommerceNational Institute of Standards and Technology
  5. Doubling the energy density of lithium-ion batteries for transportation

    SBC: SILA NANOTECHNOLOGIES, INC.            Topic: 1

    To accelerate the adoption of battery electric vehicles (BEVs), Sila Nanotechnologies and its project team aim to transform portable energy storage by demonstrating 1200 Wh/L performance in full cells, with electrode materials materials cost of just $40/kWh. By more than doubling the amount of energy stored in any given form factor cell, without changing the manufacturing process, we will reduce ...

    SBIR Phase I 2012 Department of EnergyARPA-E
  6. Doubling the energy density of lithium-ion batteries for transportation

    SBC: SILA NANOTECHNOLOGIES, INC.            Topic: DEFOA0000674

    "To accelerate the adoption of battery electric vehicles (BEVs), Sila Nanotechnologies and its project team aim to transform portable energy storage by demonstrating 1200 Wh/L performance in full cells, with electrode materials materials cost of just $40/kWh. By more than doubling the amount of energy stored in any given form factor cell, without changing the manufacturing process, we will reduce ...

    SBIR Phase II 2012 Department of EnergyARPA-E
  7. Doubling the energy density of lithium-ion batteries for transportation

    SBC: SILA NANOTECHNOLOGIES, INC.            Topic: 1

    To accelerate the adoption of battery electric vehicles (BEVs), Sila Nanotechnologies and its project team aim to transform portable energy storage by demonstrating 1200 Wh/L performance in full cells, with electrode materials materials cost of just $40/kWh. By more than doubling the amount of energy stored in any given form factor cell, without changing the manufacturing process, we will reduce ...

    SBIR Phase II 2012 Department of EnergyARPA-E
  8. Advanced Manufacturing and Material Measurements Software Tool Weave ™ for the Acceleration and Automation of SEM Image Analysis in the Semiconductor Industry

    SBC: Sandbox Semiconductor Incorporated            Topic: None

    In this Phase I SBIR proposal, SandBox Semiconductor™ proposes to develop an Advanced Manufacturing and Material Measurements software tool called Weave ™ for accelerating and automating SEM image analysis for the semiconductor industry. During the development of a new manufacturing process line for a semiconductor device, tens of thousands of scanning electron microscopy (SEM) images are take ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  9. Gap-Free Model-Based Engineering for Manufacturing and Analysis: Digital Thread without Translation

    SBC: Nvariate, Inc.            Topic: None

    Modern Model-Based Enterprise / Engineering (MBE) systems rely on freeform surfaces built as complex combinations of geometric primitives to define engineered objects. Unfortunately, the intersection of freeform surfaces in MBE applications results in highly approximated solutions, degrading models that cost billions annually by US industry to fix. Current technology limits the abilities of users ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  10. Multimode Chiroptical Spectrometer for Nanoparticle Characterization

    SBC: Applied Nanofluorescence LLC            Topic: None

    This project will develop a new scientific instrument optimized for the advanced characterization of near-infrared fluorescent nanoparticles that can exist as left- or right-handed structures (enantiomers). Single-walled carbon nanotubes (SWCNTs) are the leading current example of such nanomaterials. Applied NanoFluorescence, LLC (ANF) proposes a novel multi-mode chiroptical spectrometer that can ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government