Award Data

NIST and G2 have been on the forefront of security automation with the development of the Security Content Automation Protocol (SCAP). However, the barrier to entry for SCAP content creation is the requirement to have in depth knowledge of the underlying specifications. This project aims to allow security experts to create SCAP content without the need to be an expert in the specification. By leve ...

Trusted biometric validation of individual identities has never been more important. Several contributing factors are the increase in global terrorism, identity theft and the increase in legislation which are driving the accelerated adoption of biometric technology. Unfortunately, the biometrics industry has not actively responded to the changing market conditions being driven by the explosion in ...

The measurement and quality control for smooth engineering surfaces are becoming more and more important in modern science and technology due to their important engineering functions and high production costs. NIST has frequently received requests for U.S. industry to provide Standard Reference Material (SRM) high-precision, random profile roughness specimens to support smooth surface measurements ...

methyst Research Inc. will design, fabricate and test a high uniformity, large area, low noise infrared trap-detector detector for the 1- 4.5 μm wavelength range. This state of the art detector will have a large area (e.g., 1-1.8 cm diameter active area) with a spatial variability of internal quantum efficiency of less than 0.1 % between 1 μm and 4.5 μm. In addition, the internal quantum effici ...

Scalable manufacturing of micro-engineered MRI contrast agents has the potential to increase the specificity and resolution of imaging techniques, while reducing morbidity. Currently, techniques used for making such particles are expensive and labor intensive. In Phase I, Weinberg Medical Physics will validate techniques for rapid, massively parallel fabrication of microscale contrast agents (incl ...

The objective of this project is to demonstrate a resonant scan lens (RSL) that increases the uniformity of beam scans projected from resonant optomechanical systems. While resonant optomechanical systems generate high-speed beam scans, large mechanical displacements, and robust operation from miniature form factors, scans projected from such systems lack uniformity across the field-of-view (FOV). ...

Low Thermal Electronics, Inc. proposes to design a stand-alone, programmable voltage source capable of supplying precision voltages in the range of zero to 1,000 volts direct current (DC), with options for scaling up to 10,000 volts, and with a total expanded uncertainty (k=2) of less than 10uV/V for the 10,000 volt version. This instrument will improve state-of-the-art measurements in high resist ...

This Small Business Innovation Research Phase 1 project will evaluate the feasibility of an innovative optical sizer for estimating drop sizes in sprays that have very small drops. The technique is based on the NIST provisional patent (application number 62/358,264). The NIST invention sorts particles by size over the range of 10nm to 10μm. Drop sizing is achieved in these sprays using an intense ...

The vision is to provide decision-makers with effective, fast, and inexpensive analysis tools to answer "What-If" and "What-Should" questions about manufacturing systems. Value Stream Mapping (VSM) is a modeling methodology with widespread contemporary use in manufacturing, and our strategy is to start with VSM as a deployment beachhead for the eventual deployment of a more generic manufacturing s ...

NIST's seeks a high resolution DIC technology for qualification of complex AM parts. To meet this critical need, X-wave Innovations Inc. proposes to develop a 3-Dimentional Digital Image Correlation (3-D DIC) based NDT system. The proposed effort builds upon the success of XII in developing a variety of NDT technologies (including DIC system) for advanced materials evaluation. The success of the p ...