You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
Production Methods and Software for NIST Calibration Phantoms
SBC: SIGMA K CORP Topic: N/AMagnetic Resonance Imaging data needs to be calibrated using a universal standard. NIST and the ISMRM SQRM committee have developed the NIST/NIST MR phantom. The group had two phantoms manufactured to their specifications and these phantoms have been imaged at numerous imaging facilities. Sigma-K now proposes to develop a complete manufacturing method that will produce 50 MRI phantoms. These phant ...
SBIR Phase II 2012 Department of CommerceNational Institute of Standards and Technology -
Fulcrum Biometrics' Plan for Research and Development of WS-BD Conformant Handheld Fingerprint Sensor
SBC: Fulcrum Biometrics, LLC Topic: N/ATrusted biometric validation of individual identities has never been more important. Several contributing factors are the increase in global terrorism, identity theft and the increase in legislation which are driving the accelerated adoption of biometric technology. Unfortunately, the biometrics industry has not actively responded to the changing market conditions being driven by the explosion in ...
SBIR Phase I 2012 Department of CommerceNational Institute of Standards and Technology -
High-Throughput Manufacturing Methods for Engineered MRI Contrast Agents
SBC: ADVANCED RESEARCH CORPORATION Topic: 9010368RThis project focuses on developing a magnetic resonance imaging (MRI) contrast agent that may increase the detection of tagged cells by a factor of 10-100. The ability to noninvasively track specifically labeled (tagged) cells, enables a researcher or medical treatment professional to dynamically monitor the delivery and targeted application of medicinal and bio-reactive agents.
SBIR Phase I 2015 Department of CommerceNational Institute of Standards and Technology -
Large-Area, High-Uniformity Photodiodes for Infrared Trap Detectors
SBC: AMETHYST RESEARCH INC Topic: 9020168Rmethyst Research Inc. will design, fabricate and test a high uniformity, large area, low noise infrared trap-detector detector for the 1- 4.5 μm wavelength range. This state of the art detector will have a large area (e.g., 1-1.8 cm diameter active area) with a spatial variability of internal quantum efficiency of less than 0.1 % between 1 μm and 4.5 μm. In addition, the internal quantum effici ...
SBIR Phase I 2015 Department of CommerceNational Institute of Standards and Technology -
Fiber Pigtailed On-Chip Mid-infrared Difference Frequency Generation in Silicon
SBC: OMEGA OPTICS, INC. Topic: 90102Omega Optics will develop a fiber-coupled platform in strained silicon-on-sapphire (SoS) for tunable difference frequency generation in midwave infrared (MIR) with tunable continuous wave sources in the near-infrared (NIR). Stress exerted by silicon nitride on underlying silicon induces second-order nonlinear susceptibility. NIR light is coupled into silicon and MWIR light is coupled out of silico ...
SBIR Phase I 2016 Department of CommerceNational Institute of Standards and Technology -
Pre-concentrator for Capture of Trace Fluorocarbons
SBC: XPLOSAFE LLC Topic: 90108While fluorocarbons are released in relatively small amounts, they can have half-lives in the atmosphere as long as 50,000 years. However, they have extremely high global warming potential relative to other greenhouse gases, so that even small atmospheric concentrations can have large effect on global temperatures. For this reason, monitoring atmospheric concentrations of these compounds, identify ...
SBIR Phase I 2016 Department of CommerceNational Institute of Standards and Technology -
Precision 10 kV Programmable Voltage Source
SBC: Low Thermal Electronics, Inc. Topic: NALow Thermal Electronics, Inc. proposes to design a stand-alone, programmable voltage source capable of supplying precision voltages in the range of zero to 1,000 volts direct current (DC), with options for scaling up to 10,000 volts, and with a total expanded uncertainty (k=2) of less than 10uV/V for the 10,000 volt version. This instrument will improve state-of-the-art measurements in high resist ...
SBIR Phase I 2017 Department of CommerceNational Institute of Standards and Technology -
ISABEL- Integrated Secure Automated Bug Extraction List
SBC: SMART INFORMATION FLOW TECHNOLOGIES LLC Topic: NAThe ISABEL program will create symbolic execution signatures to classify bugs in the NIST Bugs Framework. Using the symbolic execution signature ISABEL will find a program input to trigger the bug using fuzz testing. ISABEL will integrate its bug categorization and bug triggering capability with a software development environment using a flexible framework that will allow both open source and comm ...
SBIR Phase I 2017 Department of CommerceNational Institute of Standards and Technology -
Fiber Pigtailed On-Chip Mid-infrared Difference Frequency Generation in Silicon
SBC: OMEGA OPTICS, INC. Topic: NAWe propose a fiber-pigtailed strained silicon platform for tunable difference frequency generation (DFG) in mid-infrared (MIR) with tunable continuous wave near-infrared (NIR) sources. Stress exerted by silicon nitride induces second-order nonlinear susceptibility c(2) on underlying centro-symmetric silicon. NIR light is coupled into silicon and MIR light is coupled out of silicon using sub-wavele ...
SBIR Phase II 2017 Department of CommerceNational Institute of Standards and Technology -
Gap-Free Model-Based Engineering for Manufacturing and Analysis: Digital Thread without Translation
SBC: Nvariate, Inc. Topic: NoneModern Model-Based Enterprise / Engineering (MBE) systems rely on freeform surfaces built as complex combinations of geometric primitives to define engineered objects. Unfortunately, the intersection of freeform surfaces in MBE applications results in highly approximated solutions, degrading models that cost billions annually by US industry to fix. Current technology limits the abilities of users ...
SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology