Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Fulcrum Biometrics' Plan for Research and Development of WS-BD Conformant Handheld Fingerprint Sensor

    SBC: Fulcrum Biometrics, LLC            Topic: N/A

    Trusted biometric validation of individual identities has never been more important. Several contributing factors are the increase in global terrorism, identity theft and the increase in legislation which are driving the accelerated adoption of biometric technology. Unfortunately, the biometrics industry has not actively responded to the changing market conditions being driven by the explosion in ...

    SBIR Phase I 2012 Department of CommerceNational Institute of Standards and Technology
  2. Improved Microcalorimeter Detectors for X-Ray Chemical Shift Mapping

    SBC: STAR CRYOELECTRONICS LLC            Topic: N/A

    X-ray fluorescence spectroscopy is a widely used and extremely sensitive analytical technique for qualitative as well as quantitative chemical analysis. Superconducting Transition Edge Sensor (TES) microcalorimeter detectors have now been developed that achieve an energy resolution of 2 eV (full width at half maximum) for 1.5 keV X-rays, which is sufficient to enable the measurement of the small s ...

    SBIR Phase I 2012 Department of CommerceNational Institute of Standards and Technology
  3. Large-Area, High-Uniformity Photodiodes for Infrared Trap Detectors

    SBC: AMETHYST RESEARCH INCORPORATED            Topic: 9020168R

    methyst Research Inc. will design, fabricate and test a high uniformity, large area, low noise infrared trap-detector detector for the 1- 4.5 μm wavelength range. This state of the art detector will have a large area (e.g., 1-1.8 cm diameter active area) with a spatial variability of internal quantum efficiency of less than 0.1 % between 1 μm and 4.5 μm. In addition, the internal quantum effici ...

    SBIR Phase I 2015 Department of CommerceNational Institute of Standards and Technology
  4. ACPT: A User-friendly, Efficient, Reliable, and Generic Access Control Policy Modeling, Verification, and Testing Tool

    SBC: INFOBEYOND TECHNOLOGY, LLC            Topic: 9030277R

    InfoBeyond Technology advocates the development of a user-friendly, efficient, reliable, and generic Access Control Policy modeling, verification, and Testing (ACPT) Tool. InfoBeyond Technology’s ACPT enhances NIST’s ACPT design and adds several advanced features for achieving high security confidence AC levels such that it can be commercialized. It provides user-friendly GUI templates for use ...

    SBIR Phase I 2015 Department of CommerceNational Institute of Standards and Technology
  5. Cognitive Residential Heat Pumps Fault Detection and Diagnostic Datalogger

    SBC: MANAGEMENT SCIENCES INC            Topic: 9010173R

    During Phase I, Management Sciences, Inc. (MSI) proved feasibility of adapting their current technology into a product capable of improving performance resulting in increased efficiency and extended life cycles of heat pumps. The resultant product is a tool named the Heat Pump Sentient (HP-Sentient). The HP-Sentient will improve performance and reduce maintenance costs through aggressive goal-seek ...

    SBIR Phase II 2015 Department of CommerceNational Institute of Standards and Technology
  6. Precision 10 kV Programmable Voltage Source

    SBC: Low Thermal Electronics, Inc.            Topic: NA

    Low Thermal Electronics, Inc. proposes to design a stand-alone, programmable voltage source capable of supplying precision voltages in the range of zero to 1,000 volts direct current (DC), with options for scaling up to 10,000 volts, and with a total expanded uncertainty (k=2) of less than 10uV/V for the 10,000 volt version. This instrument will improve state-of-the-art measurements in high resist ...

    SBIR Phase I 2017 Department of CommerceNational Institute of Standards and Technology
  7. Low‐Latency High‐reliability Wireless Protocol for Advanced Manufacturing Applications

    SBC: INFOBEYOND TECHNOLOGY, LLC            Topic: NA

    Advanced manufacture requires low-latency and high-reliability wireless communications between the sensors/actuators and the central controller. However, the current wireless protocols cannot meet such stringent latency and reliability requirements. In this project, InfoBeyond advocates L2Wireless (Low-Latency High-reliability Wireless Protocol Using Cooperative Relaying and Network Coding) to add ...

    SBIR Phase I 2017 Department of CommerceNational Institute of Standards and Technology
  8. Advanced Manufacturing and Material Measurements Software Tool Weave ™ for the Acceleration and Automation of SEM Image Analysis in the Semiconductor Industry

    SBC: Sandbox Semiconductor Incorporated            Topic: None

    In this Phase I SBIR proposal, SandBox Semiconductor™ proposes to develop an Advanced Manufacturing and Material Measurements software tool called Weave ™ for accelerating and automating SEM image analysis for the semiconductor industry. During the development of a new manufacturing process line for a semiconductor device, tens of thousands of scanning electron microscopy (SEM) images are take ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  9. CSAT: A User-friendly Efficient NIST-spec Information System Development Guideline Tool

    SBC: INFOBEYOND TECHNOLOGY, LLC            Topic: None

    NIST developed risk management framework and guidelines that assist agencies to implement integrated, organization‐wide programs to manage information security risk, and further developed Cloud Security Architecture Tool (CSAT) to facilitate in this matter. However, NIST’s CSAT needs further improvement and implementation of new functions such that it can be commercialized as an Enterprise‐g ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  10. Gap-Free Model-Based Engineering for Manufacturing and Analysis: Digital Thread without Translation

    SBC: Nvariate, Inc.            Topic: None

    Modern Model-Based Enterprise / Engineering (MBE) systems rely on freeform surfaces built as complex combinations of geometric primitives to define engineered objects. Unfortunately, the intersection of freeform surfaces in MBE applications results in highly approximated solutions, degrading models that cost billions annually by US industry to fix. Current technology limits the abilities of users ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government