Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. .50 Caliber Light Weight Precision Ammunition

    SBC: PCP TACTICAL, LLC            Topic: SOCOM13006

    The A606 round is the current round of choice for sniper operations using the M107 or MK-15 weapons platforms.The A606 round was designed as an anti-materiel munitions, is not overly accurate (estimated 2 Minute of Angle), and is heavy (every two rounds weigh approximately a pound).(For example, the M107 weighs 36 pounds and 50 rounds of ammunition weigh 25 additional pounds for a total of 61 poun ...

    SBIR Phase II 2015 Department of DefenseSpecial Operations Command
  2. 3D Printed Clothing Ensembles for The Next Generation Navy Uniform

    SBC: Lynntech Inc.            Topic: N143128

    3D Printing provides unique opportunity to use digital models for production of physical objects. The advancement in 3D Printing led to utilization of the technology in various fields such as automotive, medical, and aerospace. With decline of the cost on 3D printers and expansion of the material selection, new application areas of this unique technology have been emerging. One of these emerging a ...

    SBIR Phase I 2015 Department of DefenseNavy
  3. 4-Quadrant GaN Based Battery Isolator Unit

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: A15084

    Current military vehicles use battery-isolating diodes to transfer current between two sets of battery banks, which are heavy, inefficient, and only allow current flow from the higher charged (higher voltage) battery to the other. This proposal details efforts to develop a bi-directional dc-dc converter for military vehicles to allow for smart control of current transfer between battery banks, as ...

    SBIR Phase I 2015 Department of DefenseArmy
  4. A Field Deployable MDA Analyzer

    SBC: Lynntech Inc.            Topic: AF191028

    Trace level metals such as copper in aviation turbine fuel can significantly accelerate thermal instability of the fuel, leading to oxidation and production of detrimental insoluble deposits in the engine.The primary method of correcting the issue is through the addition of a metal deactivator additive (MDA) into the fuel.Because of its surface activity and adsorptive properties, MDA may be reduce ...

    SBIR Phase I 2019 Department of DefenseAir Force
  5. A LIGHTWEIGHT, UHF SATCOM DIPLEXER FOR USE IN EXPENDABLE BUOY SYSTEMS

    SBC: Cobra Design & Engineering, Inc            Topic: N07191

    The proposed effort for the SBIR Phase II.5 Project is a Continued Development to extend the capabilities of the Phase II unit in accordance with the UHF/MUOS SATCOM Triplex Filter Specification. The Triplex Filter will operate over the Legacy UHF SATCOM (UFO) frequency bands plus the entire MUOS frequency bands (Existing plus Growth), and will support transmit power levels up to 250 watts. The re ...

    SBIR Phase II 2015 Department of DefenseNavy
  6. A Novel, Point-of-Care, Multi-Analysis Platelet Function Diagnostic System

    SBC: Lynntech Inc.            Topic: DHP13013

    Platelets play a central role in hemostasis and are responsible for many inherited and acquired bleeding disorders and thrombic events in human beings. A significant portion of post-trauma deaths are related to coagulopathy or hemorrhage events for both injured soldiers and civilian patients. Several platelet function analyzers have been designed and developed; however due to form-factor and/or ...

    SBIR Phase II 2015 Department of DefenseDefense Health Program
  7. A REAL-TIME 3-D CLOUD SIMULATION SYSTEM DEVELOPMENT

    SBC: Aeromet, Inc.            Topic: N/A

    THIS PROPOSAL DESCRIBES A FEASIBILITY STUDY FOR IMPLEMENTING A REALTIME, THREE-DIMENSIONAL CLOUD MODEL TO SUPPORT REENTRY VEHICLE TEST OPERATIONS. AN EXISTING RESEARCH CLOUD MODEL WOULD BE INTERFACED TO A MESOSCALE ATMOSPHERIC MODEL. THE COMBINED MODELING SYSTEM WOULD BE ADAPTED FOR USE AT THE KWAJALEIN MISSILE RANGE (KMR). FORECASTS OF DETAILED CLOUD FEATURES SUCH AS WATER CONTENT, RADAR REFLECTI ...

    SBIR Phase II 1987 Department of DefenseAir Force
  8. A Standardized Development Suite for Decision Engines

    SBC: QUICKFLEX INC.            Topic: MDA08043

    QuickFlex is creating a standardized development suite for decision engines which can be inserted into any number of systems to provide an "off-the-shelf' component for monitoring inputs from various sensors. The inputs, their meaning, and their relationships are unique to each system, but the decision engine, and the tools used to setup that engine, will be provided as a common platform. The gene ...

    SBIR Phase II 2015 Department of DefenseMissile Defense Agency
  9. Accelerated Adhesive Cure for Nutplate Repair

    SBC: Texas Research Institute, Austin, Inc.            Topic: AF161124

    ABSTRACT: The F-35 Joint Strike Fighter uses metal nutplates to secure fasteners in areas that have no backside access at the time of installation.These nutplates are attached with a two-part adhesive which currently requires a 24 hour cure at room temperature.This long cure time negatively impacts the aircrafts availability if an aircraft comes back to the depot and they have a disbond of a nutpl ...

    SBIR Phase I 2016 Department of DefenseAir Force
  10. Accelerating Instructor Mastery

    SBC: Cognitive Performance Group of Florida            Topic: N152108

    Military instructors do not have the time or support necessary to achieve mastery or even ensure continued professional development during their tenure as instructors. Teaching skill must develop to adequate levels in the early months of the typical three-year tenure and continue to grow and progress after initial formal training. Each formal school in the Marine Corps has a unique method of initi ...

    SBIR Phase I 2016 Department of DefenseNavy
US Flag An Official Website of the United States Government