Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Advanced Manufacturing and Material Measurements Software Tool Weave ™ for the Acceleration and Automation of SEM Image Analysis in the Semiconductor Industry

    SBC: Sandbox Semiconductor Incorporated            Topic: None

    In this Phase I SBIR proposal, SandBox Semiconductor™ proposes to develop an Advanced Manufacturing and Material Measurements software tool called Weave ™ for accelerating and automating SEM image analysis for the semiconductor industry. During the development of a new manufacturing process line for a semiconductor device, tens of thousands of scanning electron microscopy (SEM) images are take ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  2. Fiber Pigtailed On-Chip Mid-infrared Difference Frequency Generation in Silicon

    SBC: Omega Optics, Inc.            Topic: 90102

    Omega Optics will develop a fiber-coupled platform in strained silicon-on-sapphire (SoS) for tunable difference frequency generation in midwave infrared (MIR) with tunable continuous wave sources in the near-infrared (NIR). Stress exerted by silicon nitride on underlying silicon induces second-order nonlinear susceptibility. NIR light is coupled into silicon and MWIR light is coupled out of silico ...

    SBIR Phase I 2016 Department of CommerceNational Institute of Standards and Technology
  3. Gap-Free Model-Based Engineering for Manufacturing and Analysis: Digital Thread without Translation

    SBC: Nvariate, Inc.            Topic: None

    Modern Model-Based Enterprise / Engineering (MBE) systems rely on freeform surfaces built as complex combinations of geometric primitives to define engineered objects. Unfortunately, the intersection of freeform surfaces in MBE applications results in highly approximated solutions, degrading models that cost billions annually by US industry to fix. Current technology limits the abilities of users ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  4. Large-Area, High-Uniformity Photodiodes for Infrared Trap Detectors

    SBC: Amethyst Research Incorporated            Topic: 9020168R

    methyst Research Inc. will design, fabricate and test a high uniformity, large area, low noise infrared trap-detector detector for the 1- 4.5 μm wavelength range. This state of the art detector will have a large area (e.g., 1-1.8 cm diameter active area) with a spatial variability of internal quantum efficiency of less than 0.1 % between 1 μm and 4.5 μm. In addition, the internal quantum effici ...

    SBIR Phase I 2015 Department of CommerceNational Institute of Standards and Technology
  5. Multimode Chiroptical Spectrometer for Nanoparticle Characterization

    SBC: Applied Nanofluorescence LLC            Topic: None

    This project will develop a new scientific instrument optimized for the advanced characterization of near-infrared fluorescent nanoparticles that can exist as left- or right-handed structures (enantiomers). Single-walled carbon nanotubes (SWCNTs) are the leading current example of such nanomaterials. Applied NanoFluorescence, LLC (ANF) proposes a novel multi-mode chiroptical spectrometer that can ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  6. Pre-concentrator for Capture of Trace Fluorocarbons

    SBC: XPLOSAFE, LLC            Topic: 90108

    While fluorocarbons are released in relatively small amounts, they can have half-lives in the atmosphere as long as 50,000 years. However, they have extremely high global warming potential relative to other greenhouse gases, so that even small atmospheric concentrations can have large effect on global temperatures. For this reason, monitoring atmospheric concentrations of these compounds, identify ...

    SBIR Phase I 2016 Department of CommerceNational Institute of Standards and Technology
  7. Protein Qspec: An Improved Method for Rapid Characterization of Protein Aggregates in Biologic Drugs for Increased Quality and Safety

    SBC: OPTOFLUIDICS, INC.            Topic: 90201

    Optofluidics will develop Protein Qspec, a new particle analysis QC instrument designed to characterize protein aggregates in biologic drugs. The primary concern for this class of therapeutics is that they can elicit an immune response from patients who develop anti-drug antibodies which can eliminate the therapeutic benefit. The presence of particulate matter, in these therapeutics (e.g. shed gla ...

    SBIR Phase I 2016 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government