Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. A Sparse Information Processing Refinery for Aviation Sustainment

    SBC: Oceanit Laboratories, Inc.            Topic: A18004

    Oceanit proposes to develop a Sparse Information Processing Refinery (SIPR) targeted to the sustainment of aviation platforms, which is a graphical environment for managing and extracting information from aviation data.Unlike most existing platforms, SIPR is designed for the case where data are sparse and/or difficult to obtain.To make the most of a limited data set, SIPR leverages recent advances ...

    SBIR Phase I 2019 Department of DefenseArmy
  2. ADVANCED FACILITIES TO EXPEDITE DESIGN AND EVALUATION OF COMMUNICATIONS SYSTEMS

    SBC: Information Research            Topic: N/A

    THE TECHNICAL OBJECTIVE OF THIS PROJECT IS TO ESTABLISH THE FEASILBILITY OF SATISFYING THE REQUIREMENTS OF THE U.S. ARMY COMMUNICATIONS ELECTRONICS COMMAND (CECOM) FOR RAPID AND EFFECTIVE MODELING OF U.S. ARMY COMMUNICATION SYSTEMS. THE METHOD WE PROPOSE FOR SATISFYING THESE REQUIREMENTS IS TO ADAPT A TOP-DOWN DESIGN SYSTEM FOR ELECTRONIC SYSTEMS BEING DEVELOPED FOR THE U.S. NAVY TO MODEL-ING OF C ...

    SBIR Phase I 1987 Department of DefenseArmy
  3. Advanced Manufacturing and Material Measurements Software Tool Weave ™ for the Acceleration and Automation of SEM Image Analysis in the Semiconductor Industry

    SBC: Sandbox Semiconductor Incorporated            Topic: None

    In this Phase I SBIR proposal, SandBox Semiconductor™ proposes to develop an Advanced Manufacturing and Material Measurements software tool called Weave ™ for accelerating and automating SEM image analysis for the semiconductor industry. During the development of a new manufacturing process line for a semiconductor device, tens of thousands of scanning electron microscopy (SEM) images are take ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  4. ADVANCED SENSORS FOR CLOSE PROXIMITY ROBOTIC MINE DETECTION

    SBC: Coleman Research Corp.            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseArmy
  5. AUTOMATED REUSABLE COMPONENT SYSTEM (ARCS)

    SBC: MODUS OPERANDI, INC.            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseArmy
  6. BALLISTIC FACE SHIELD WITH DEICING/DEFOGGING CAPABILITIES IN EXTREME CLIMATE

    SBC: Polytronix Inc            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseArmy
  7. Ballistic Missile Defense Weather Management

    SBC: Corvid Technologies LLC            Topic: A17010

    Corvid Technologies is pleased to offer this Phase II proposal in response to Army SBIR topicA17-010, Ballistic Missile Defense Weather Management. In the proposed effort, we willcontinue to develop Corvids computational capability for shock layer distortion due tohydrometeor impact on high-speed missile systems, demonstrated during our Phase I program.We will also formulate and execute a pathfind ...

    SBIR Phase II 2019 Department of DefenseArmy
  8. BARRIERLESS ULTRASONIC AIR CLEANER

    SBC: Taylor S R & Assocs            Topic: N/A

    MILITARY VEHICLE AIR CLEANER SYSTEM PERFORMANCE CAN BE EVALUATED IN SEVERAL WAYS, HOWEVER, ONE OF THE MOST IMPORTANT PERFORMANCE CONSIDERATIONS IS SERVICE LIFE. TODAY, AIR CLEANERS REQUIRE FREQUENT SERVICING IN DUSTY CONDITIONS AND POSE A CONTAMINATION RISK FACTOR TO MEDIA MATERIAL AND MAINTENANCE PERSONNEL DURING CLEANING IN AN NBC ENVIRONMENT. IN FACT, IT IS THIS PARAMETER THAT HAS LED TO THE US ...

    SBIR Phase I 1987 Department of DefenseArmy
  9. Blast Overpressure Omnidirectional Measurement Device

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: A18078

    Mainstream proposes developing a blast overpressure omnidirectional measurement (BOOM) device that detects, records, and transmits captured data for blast events experienced by individual personnel. The BOOM device is composed of a microcontroller that collects, stores, and transmits data collected from several miniature pressure transducers placed on personnel. The sensors enable capture of the p ...

    SBIR Phase I 2019 Department of DefenseArmy
  10. CARBON SURFACE MODIFICATIONS TO ACHIEVE HYDROPHOBICITY

    SBC: Perfect View Inc.            Topic: N/A

    PERFECT VIEW INC. AND THE PRINCIPAL INVESTIGATOR, DR. A. J. ATTAR, HAVE RECENTLY OBTAINED A PATENT ON A METHOD TO REMOVE MINERAL WATER FROM COAL BY FIRST TURNING ITS SURFACE HYDROPHOBIC (U.S. PATENT 4,597,769, ISSUED JULY 1ST, 1986). THE TREATMENT INVOLVES A VERY LOW-COST CHEMICAL REACTION WHICH CONVERTS THE HYDROXLIC AND CARBOXYLIC SURFACE FUNCTIONALITIES TO ETHERS AND ESTERS. THIS TREATMENT REDU ...

    SBIR Phase I 1987 Department of DefenseArmy
US Flag An Official Website of the United States Government