Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Advanced Manufacturing and Material Measurements Software Tool Weave ™ for the Acceleration and Automation of SEM Image Analysis in the Semiconductor Industry

    SBC: Sandbox Semiconductor Incorporated            Topic: None

    In this Phase I SBIR proposal, SandBox Semiconductor™ proposes to develop an Advanced Manufacturing and Material Measurements software tool called Weave ™ for accelerating and automating SEM image analysis for the semiconductor industry. During the development of a new manufacturing process line for a semiconductor device, tens of thousands of scanning electron microscopy (SEM) images are take ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  2. Advanced Tools for Process Specification Language

    SBC: KNOWLEDGE BASED SYSTEMS, INC.            Topic: N/A

    This project will (i) extend and harden the PSL Editor and the Ontology-Driven XSLT Generator (ODXG) tools and (ii) extend the process description syntax (PDS) derived from the PSL for both KIF and XML/RDF formats. In addition, we will extend the PSL metatheoretical framework to support the PDS and the PSL tools by providing PSL extensions to support calendars and activity specialization, and by d ...

    SBIR Phase II 2003 Department of CommerceNational Institute of Standards and Technology
  3. Automated Reconfiguable Intelligent Radio (ARIR)

    SBC: WILLIAMSRDM, INC.            Topic: N/A

    Williams-Pyro, Inc. proposes to develop an Automated Reconfigurable Intelligent Radio (ARIR), which consists of a series of distributed nodes that will relay voice and data to Intelligent Access Points (IAP) located within the building. This system will allow faster, more accurate information transmission, resulting in timely fire detection and safer firefighting. The main goal of ARIR is to ident ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  4. Complex Crystalloid Resuscitative Fluid

    SBC: GanD Inc            Topic: DHA172009

    Problem: Currently available resuscitation fluids have been shown to induce detrimental effects on trauma outcomes.Objective: The objective of this proposal is to use the data from the successful Phase 1 studies to guide the continued development and testing of the novel resuscitation fluid (GND-001), which has been designed to address the deficiencies of current resuscitation fluids.Proposed work ...

    SBIR Phase II 2019 Department of DefenseDefense Health Program
  5. Development of Multifunctional Open-system Sensor Integration Tool (MOSIT)

    SBC: WILLIAMSRDM, INC.            Topic: N/A

    Williams-Pyro, Inc. proposes to model and develop software to provide an interface allowing a common method of incorporating sensing components within different systems. The proposed software package, called the Multifunctional Open-system Sensor Integration Tool (MOSIT), will provide the circuit designer with a complete sensor interface solution. MOSIT will provide not only the Network Capable Ap ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  6. Development of the Smart Environmental Monitoring System (SEMS)

    SBC: WILLIAMSRDM, INC.            Topic: N/A

    Firefighters have expressed the need for both increased accuracy in fire detection systems and greater access to environmental information in the event of a fire. To accomplish both tasks, Williams-Pyro, Inc. proposes to develop the Smart Environmental Monitoring System (SEMS). This system comprises both an advanced fire detection system and the networking capability necessary to provide real-time ...

    SBIR Phase II 2003 Department of CommerceNational Institute of Standards and Technology
  7. Dual-Probe CD-AFM Calibration

    SBC: XIDEX CORPORATION            Topic: N/A

    Xidex proposes to demonstrate the feasibility of calibrating a critical-dimension atomic force microscope (CD-AFM) without the use of a reference artifact in such a way that high-precision critical dimensions can be generated independently of changes in probe tip shape (including the effects of tip wear), presence of the surface force uncertainties, and the stage uncertainties. The proposed calibr ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  8. Gap-Free Model-Based Engineering for Manufacturing and Analysis: Digital Thread without Translation

    SBC: Nvariate, Inc.            Topic: None

    Modern Model-Based Enterprise / Engineering (MBE) systems rely on freeform surfaces built as complex combinations of geometric primitives to define engineered objects. Unfortunately, the intersection of freeform surfaces in MBE applications results in highly approximated solutions, degrading models that cost billions annually by US industry to fix. Current technology limits the abilities of users ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  9. Joint Dislocation and Reduction Simulator for Training

    SBC: Simetri, Inc.            Topic: DHA173002

    SIMETRIs effort to design, develop, and commercialize the Joint Articulation and Reduction Simulator (JAARS) integrates existing commercial manikin technology, presents multiple dislocation scenarios, and makes use of a modular design that includes Commercial Off the Shelf (COTS) and 3D printed components, with embedded sensors to provide student performance feedback as well as consumable expendit ...

    SBIR Phase II 2019 Department of DefenseDefense Health Program
  10. Microcapillary Quartz Sensors for Screening Injectability of High Concentration Protein Formulations

    SBC: Qatch Technologies, LLC            Topic: None

    The objective of this SBIR Phase I proposal is to determine the feasibility of viscosity characterization of high concentration protein formulations (HCF) by QATCH’s microcapillary quartz technology. HCFs are non-Newtonian fluids with shear-thinning behavior and they are administered to patients by subcutaneous or muscular injections. The injectability of HCFs depends on the viscosity at high-sh ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government