Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Advanced Female Trauma Training System

    SBC: Vcom3D, Inc.            Topic: DHP16002

    For this Phase II SBIR, Vcom3D, with its subcontractors, the University of Washington and IVIR, Inc., will develop an Advanced Female Trauma Training System (AFTTS) with realistic female anatomy, physiology, and behaviors. The AFTTS include both a Female Trauma Manikin and a tablet-based Virtual Instructor/Patient System (VIPS) that communicates wirelessly with the manikin. The AFTTS will include ...

    SBIR Phase II 2017 Department of DefenseDefense Health Program
  2. Advanced Manufacturing and Material Measurements Software Tool Weave ™ for the Acceleration and Automation of SEM Image Analysis in the Semiconductor Industry

    SBC: Sandbox Semiconductor Incorporated            Topic: None

    In this Phase I SBIR proposal, SandBox Semiconductor™ proposes to develop an Advanced Manufacturing and Material Measurements software tool called Weave ™ for accelerating and automating SEM image analysis for the semiconductor industry. During the development of a new manufacturing process line for a semiconductor device, tens of thousands of scanning electron microscopy (SEM) images are take ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  3. Advanced Morphing Moulage for Medical Training (AMM-MT)

    SBC: Vcom3D, Inc.            Topic: DHA17A002

    For this Phase I SBIR proposal, Vcom3D proposes to design advanced medical moulage that accurately simulates the progression of an injury or pathology by morphing through a series of clinical states to enable learners to confirm the progression of the wound and to determine whether iatrogenic errors or pathologies occurred duing treatment. The physical morphing moulage may be applied to medical m ...

    STTR Phase I 2017 Department of DefenseDefense Health Program
  4. Bio-mathematical Models of Aggregated Tissues & Organ Properties

    SBC: Corvid Innovation LLC            Topic: DHP16A001

    Realistic surgical simulation requires a combination of representative tissue geometry, accurate tissue material properties and lifelike tool-tissue interaction forces. Recent advances in computational power and imaging modalities have provided the capability to represent the anatomical details required for surgical training; however, the mathematical models which govern the underlying tissue pro ...

    STTR Phase II 2017 Department of DefenseDefense Health Program
  5. Compact Targeted Brain Cooling System

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: DHP16008

    Traumatic brain injury (TBI) impacts over two million Americans annually, and is the signature injury of the Iraq and Afghanistan conflicts. Therapeutic hypothermia is a promising neuroprotective technique for treating TBI, but reduced body temperature is a threat to soldiers in military operations with multiple injuries. Mainstream has proposed a novel heat pump cooling system that overcomes the ...

    SBIR Phase II 2017 Department of DefenseDefense Health Program
  6. Complex Crystalloid Resuscitative Fluid

    SBC: GanD Inc            Topic: DHA172009

    Problem: Currently available resuscitation fluids have been shown to induce detrimental effects on trauma outcomes.Objective: The objective of this proposal is to use the data from the successful Phase 1 studies to guide the continued development and testing of the novel resuscitation fluid (GND-001), which has been designed to address the deficiencies of current resuscitation fluids.Proposed work ...

    SBIR Phase II 2019 Department of DefenseDefense Health Program
  7. Conformable Osteochondral Repair Platforms for Prevention of Post Traumatic Osteoarthritis

    SBC: Theradaptive            Topic: DHA17009

    Our proposal develops an osteochondral repair platform that is conformable to a wide variety of injury geometries without the need for pre-operative customization. Further this platform does not rely on any autologous tissue and is amenable to scalable manufacturing methods. The basis of this platform is a targeted delivery technology that permits site-specific osteo-chondral induction within inj ...

    SBIR Phase I 2017 Department of DefenseDefense Health Program
  8. Development of Technologies that Address the Complex Architecture of the Face During the Treatment of Severe Facial Burn Injury

    SBC: Keranetics, LLC            Topic: DHP13016

    Burn injuries to the face present a number of functional and psychological challenges that arise from scarring and contracture. Thus, a major goal of burn and trauma surgeons is to prevent scarring and improve grafting technologies that are used on the complex topography of the face.The proposed project builds on previous Phase II SBIR work that demonstrated the feasibility of using a keratin-col ...

    SBIR Phase II 2017 Department of DefenseDefense Health Program
  9. Dynamic virtual moulage based on thin film adhesive displays

    SBC: ARCHIE MD INC.            Topic: DHA17A002

    Providing Army combat medics with meaningful experience in treatment of battlefield injuries is a particular challenge. Moulage has the potential to assist in acquiring what could otherwise be very hard-to-come-by preparatory experience for the distressing real-life emergencies medics and soldiers may encounter in the field. However, current approaches to moulage are limited in their ability to re ...

    STTR Phase I 2017 Department of DefenseDefense Health Program
  10. Fiber Pigtailed On-Chip Mid-infrared Difference Frequency Generation in Silicon

    SBC: Omega Optics, Inc.            Topic: NA

    We propose a fiber-pigtailed strained silicon platform for tunable difference frequency generation (DFG) in mid-infrared (MIR) with tunable continuous wave near-infrared (NIR) sources. Stress exerted by silicon nitride induces second-order nonlinear susceptibility c(2) on underlying centro-symmetric silicon. NIR light is coupled into silicon and MIR light is coupled out of silicon using sub-wavele ...

    SBIR Phase II 2017 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government