You are here
Award Data
The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.
Download all SBIR.gov award data either with award abstracts (290MB)
or without award abstracts (65MB).
A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.
The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.
-
A Cost-effective, Large Scale and a Novel Synthetic Route for Quasi-2D “MXene� Phase
SBC: TEXAS BIOCHEMICALS INC Topic: AF18BT017MAX phases are an important class of layered machinable ternary carbides and nitrides that exhibit a unique combination of ceramic and metal properties. In 2011, a new family of two-dimensional (2D) transition metal carbides, nitrides, and carbonitrides – called MXenes – was discovered via selective etching of the ‘A’ element from MAX phases. Texas Biochemicals Inc., has ...
STTR Phase I 2019 Department of DefenseAir Force -
ACOUSTO-OPTIC PROCESSOR FOR SYNTHETIC APERTURE RADAR
SBC: Photonic Systems, Inc. Topic: N/APROCESSING OF SAR DATA IN REAL TIME REQUIRES HIGH SPEED COMPUTATION DEVICES CURRENTLY BEYOND THE STATE-OF-THE-ART OF CONVENTIONAL METHODS. DESIRED PROCESSORS MUST ALSO BE SMALL, RUGGED AND LOW POWER TO BE DEPLOYED ON AIRCRAFT. OPTICAL TECHNIQUES CAN SATISFY THESE REQUIREMENTS WITH IMAGINATIVE ARCHITECTURES. THIS PROPOSAL PRESENTS AN INNOVATIVE APPROACH FOR REAL TIME SAR IMAGE RECONSTRUCTION THAT C ...
SBIR Phase I 1987 Department of DefenseAir Force -
Adaptive Digital Enabler of Personal assistance Technology (ADEPT)
SBC: KNOWLEDGE BASED SYSTEMS INC Topic: AF191021KBSI proposes to research, design, and demonstrate the Adaptive Digital Enabler of Personal assistance Technology (ADEPT). ADEPT is a Digital Personal Assistant (DPA) designed to enhance the effectiveness of ISR analysts by addressing their ingestion, analysis, and packaging needs. The proposed ADEPT capability will support automated data ingest and clean up, automated intelligent data fusion and ...
SBIR Phase I 2019 Department of DefenseAir Force -
ADAPTIVE GRID TECHNIQUES FOR USE IN COMPUTATIONAL FLUID DYNAMICS
SBC: Computational Mechan Topic: N/ATHIS PROJECT FOCUSES ON THE TWO MOST IMPORTANT ISSUES OF ALL OF COMPUTATIONAL FLUID DYNAMICS: 1) HOW GOOD ARE THE NUMERICAL ANSWERS OBTAINED IN A COMPUTATION? AND 2) HOW CAN THE BEST POSSIBLE ANSWERS BE OBTAINED FOR A FIXED AND LIMITED COMPUTATIONAL EFFORT, BUDGET, OR COMPUTING CAPABILITY? IN GENERAL TERMS THE ANSWERS TO THESE QUESTIONS ARE 1) TO DETERMINE RELIABLE A-POSTERIORI ESTIMATES OF ERROR ...
SBIR Phase II 1987 Department of DefenseAir Force -
ADAPTIVE NULLING BY ELECTRICAL SURFACE CONTROL OF A REFLECTOR ANTENNA
SBC: COMPUTER SCIENCE INNOVATIONS, INC. Topic: N/AAN INNOVATIVE APPROACH TO FORMING A NULL IN THE SECONDARY PATTERN OF A REFLECTOR ANTENNA IS DEVELOPED BY THIS PROJECT. AN ELECTRONICALLY CONTROLLABLE REFLECTIVE SURFACE BEING DEVELOPED ON A NASA SBIR IS THE STARTING POINT FOR THE WORK. THIS PROJECT EXTENDS THE PERFORMANCE OF THE SURFACE SO THAT IT IS USEFUL AS A NULL FORMER. THE RESULT IS CONSIDERABLY REDUCED COST OF NULL STEERING ANTENNAS. THE DE ...
SBIR Phase II 1987 Department of DefenseAir Force -
Advanced Energy Deposition Ignition Systems for High-Speed Flight
SBC: FGC Plasma Solutions, Inc. Topic: AF191005Dominance in hypersonic systems is necessary to counter emerging threats from near-peer states which are aggressively developing their own hypersonic capabilities. An important part of the Air Force’s projected future capabilities is reusable hypersonic aircraft with the ability to operate from conventional fields and accelerate to speeds of Mach 5 or above. These aircraft could perform a v ...
SBIR Phase II 2019 Department of DefenseAir Force -
Advanced Manufacturing and Assembly Approaches for Reduced Cost Small Satellite Constellations
SBC: Sciperio, Inc. Topic: AF191075The primary objective of this program is to fully transition a DDM approach for fabricating classes of satellites between 6U cubesats and ESPA. To accomplish this, highly integrated subcomponents with integrated functionality must support thermal, RF, data, power, radiation protection and structural will be mandatory. A fair fraction of a satellite can be made modular, and all features and functio ...
SBIR Phase I 2019 Department of DefenseAir Force -
ADVANCED RADIOGRAPHIC TECHNIQUES UTILIZING A SOLID-STATE ELECTRONIC IMAGER
SBC: General Imaging Corp. Topic: N/ANONDESTRUCTIVE EVALUATION OF MUNITIONS PRESENTS SPECIAL PROBLEMS THAT CANNOT BE SOLVED WITH CONVENTIONAL TECHNIQUES. AN ELECTRONIC X-RAY IMAGING SYSTEM WILL BE STUDIED TO DETERMINE THE FEASIBILITY OF ITS USE IN ADVANCED RADIOGRAPHIC IMAGING TECHNIQUES SUCH AS REMOTE ON-LINE INSPECTION, MULTISPECTRAL RADIOGRAPHY AND BACKSCATTER TOMOGRAPHY.
SBIR Phase I 1987 Department of DefenseAir Force -
Advanced Simulated Patient Intelligent Response Engine (ASPIRE)
SBC: VCOM3D INC Topic: DHA191002The goal of medical simulation-based training such as high-fidelity manikin simulators, part task trainers, and screen-based virtual patients, is to approximate real-life treatment experiences without risk to live patients. While the use of sensors has ma
SBIR Phase I 2019 Department of DefenseDefense Health Agency -
Advanced Solar Cell Metallization
SBC: APPLIED NANOTECH, INC. Topic: AF171070We propose a resilient silver flake based metallization technology directly printable onto multijunction solar cells. The metallization will be loaded with carbon nanotubes to improve crack resilience. We will demonstrate that we can maintain connectivity (< 5% performance degradation) of a printed front-side metal layer across a gap up to 30 microns. In Phase I, we demonstrated metal line resisti ...
SBIR Phase II 2019 Department of DefenseAir Force