You are here

Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY24 is not expected to be complete until March, 2025.

Download all SBIR.gov award data either with award abstracts (290MB) or without award abstracts (65MB). A data dictionary and additional information is located on the Data Resource Page. Files are refreshed monthly.

The SBIR.gov award data files now contain the required fields to calculate award timeliness for individual awards or for an agency or branch. Additional information on calculating award timeliness is available on the Data Resource Page.

  1. Performance Optimized Hierarchical Microstructure Propellant for Future Small Interceptor Rocket Motors

    SBC: HELICON CHEMICAL COMPANY LLC            Topic: MDA18004

    Future interceptors would benefit from advanced propulsion capabilities, with higher performance in smaller, volume-constrained systems. Innovative propellant chemistry is needed to enable substantially greater performance in smaller packages. One factor limiting the maximum performance achievable in modern solid propellants is the slow ignition and combustion of the propellant’s metal fuel part ...

    SBIR Phase II 2019 Department of DefenseMissile Defense Agency
  2. Techniques for Real-time Hypervelocity Projectile fly-out Generation and Optimization

    SBC: VADUM INC            Topic: MDA18002

    Vadum has demonstrated the Optimal Advanced Hypervelocity Projectile (HVP) Trajectory System (OATHS) which increases the performance of the HVP by optimizing HVP trajectory to its target. OATHS was prototyped and tested using an in-house MATLAB-based combat system development environment. The results of Phase I testing show that OATHS can feasibly increase HVP probability of kill or reduce the tot ...

    SBIR Phase II 2019 Department of DefenseMissile Defense Agency
  3. Lightweight Structural Components of a Missile Body

    SBC: TEXAS RESEARCH INSTITUTE , AUSTIN, INC.            Topic: MDA17T004

    A significant weight reduction on missile platforms could increase maneuverability of the payload and allow more capable payloads. High temperature composite materials offer the means by which low cost and lighter weight missile structures can be achieved. Approved for Public Release 19-MDA-10203 (4 Sep 19)

    STTR Phase II 2019 Department of DefenseMissile Defense Agency
  4. Advanced Cyber Threat Intelligence and Vulnerability Analysis Training Environment (ACTIVATE)

    SBC: KNOWLEDGE BASED SYSTEMS INC            Topic: MDA18001

    Knowledge Based Systems, Inc. (KBSI) will design and demonstrate an Advanced Cyber Threat Intelligence and Vulnerability Analysis Training Environment (ACTIVATE) framework that directly targets the need for advanced cyber network defense training. The proposed new enabling capability will support cyber training against an intelligent red team to enhance cyber operator trainee cyber-attack recognit ...

    SBIR Phase II 2019 Department of DefenseMissile Defense Agency
  5. Multimode Chiroptical Spectrometer for Nanoparticle Characterization

    SBC: APPLIED NANOFLUORESCENCE, LLC            Topic: None

    This project will develop a new scientific instrument optimized for the advanced characterization of near-infrared fluorescent nanoparticles that can exist as left- or right-handed structures (enantiomers). Single-walled carbon nanotubes (SWCNTs) are the leading current example of such nanomaterials. Applied NanoFluorescence, LLC (ANF) proposes a novel multi-mode chiroptical spectrometer that can ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  6. Clinical Evaluation of Biocompatible Dressings for the Delivery of Analgesics

    SBC: Keratin Biosciences Inc.            Topic: A14048

    The Phase I and Phase II projects that are the basis for this Phase II enhancement proposal tested the feasibility of releasing opiate compounds from a topical wound dressing for burn pain relief and treatment. This project culminated with a regulatory s

    SBIR Phase II 2019 Department of DefenseDefense Health Agency
  7. Small Filament Wound Lightweight Missile Defense Interceptor Shielding Structures

    SBC: NANOSONIC INC.            Topic: MDA18006

    During Phase I, NanoSonic produced structural shielding composites based on additively manufactured filament wound lightweight (< 0.4 g/cc) graded atomic number (Z) constituents. Such composites demonstrated Electromagnetic Interference (EMI) Shielding Effectiveness (SE) of -105 dB over 2 – 20 GHz and radiation durability upon exposure equivalent to 50-year simulated low-Earth-orbit (LEO) space ...

    SBIR Phase II 2019 Department of DefenseMissile Defense Agency
  8. Microcapillary Quartz Sensors for Screening Injectability of High Concentration Protein Formulations

    SBC: QATCH TECHNOLOGIES LLC            Topic: None

    The objective of this SBIR Phase I proposal is to determine the feasibility of viscosity characterization of high concentration protein formulations (HCF) by QATCH’s microcapillary quartz technology. HCFs are non-Newtonian fluids with shear-thinning behavior and they are administered to patients by subcutaneous or muscular injections. The injectability of HCFs depends on the viscosity at high-sh ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  9. Gap-Free Model-Based Engineering for Manufacturing and Analysis: Digital Thread without Translation

    SBC: Nvariate, Inc.            Topic: None

    Modern Model-Based Enterprise / Engineering (MBE) systems rely on freeform surfaces built as complex combinations of geometric primitives to define engineered objects. Unfortunately, the intersection of freeform surfaces in MBE applications results in highly approximated solutions, degrading models that cost billions annually by US industry to fix. Current technology limits the abilities of users ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  10. Advanced Manufacturing and Material Measurements Software Tool Weave ™ for the Acceleration and Automation of SEM Image Analysis in the Semiconductor Industry

    SBC: Sandbox Semiconductor Incorporated            Topic: None

    In this Phase I SBIR proposal, SandBox Semiconductor™ proposes to develop an Advanced Manufacturing and Material Measurements software tool called Weave ™ for accelerating and automating SEM image analysis for the semiconductor industry. During the development of a new manufacturing process line for a semiconductor device, tens of thousands of scanning electron microscopy (SEM) images are take ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government