Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. 3D PRINTABLE, REACTIVELY DEPOSITED HYBRIDSIL POLYIMIDE MATERIALS FOR THE FFF PRODUCTION OF HIGH TEMPERATURE TOOLING

    SBC: Nanosonic Inc.            Topic: A18140

    The objective of this program is to develop, cultivate, and commercially transition innovative high temperature HybridSil polyimide copolymers that may be 3D printed via fused filament fabrication (FFF) processes using commercial-off-the-shelf (COTS) 3D printers to additively manufacture tooling for high-pressure injection molding operations. The proposed FFF printable HybridSil polyimides will pr ...

    SBIR Phase I 2019 Department of DefenseArmy
  2. A DIGITAL SYSTEM APPROACH FOR REALTIME HF EMITTER IDENTIFICATION

    SBC: Scope Inc.            Topic: N/A

    SCOPE PROPOSES TO DEVELOP A DIGITAL SIGNAL PROCESSING CONCEPT FOR THE REALTIME DETECTION AND IDENTIFICATION OF HF EMITTERS AND THEIR PLATFORMS. THIS INVESTIGATION WILL SPECIFICALLY EVALUATE HF EMITTER CHARACTERISTICS AND PHENOMENA OF POTENTIAL INTEREST FOR IDENTIFICATION. SIGNAL PROCESSING TECHNIQUES AND ALGORITHMS WILL BE DEFINED TO EXPLOIT EMITTER AND PLATFORM IDENTIFIABLE SIGNAL CHARACTERISTICS ...

    SBIR Phase II 1987 Department of DefenseArmy
  3. A Sparse Information Processing Refinery for Aviation Sustainment

    SBC: Oceanit Laboratories, Inc.            Topic: A18004

    Oceanit proposes to develop a Sparse Information Processing Refinery (SIPR) targeted to the sustainment of aviation platforms, which is a graphical environment for managing and extracting information from aviation data.Unlike most existing platforms, SIPR is designed for the case where data are sparse and/or difficult to obtain.To make the most of a limited data set, SIPR leverages recent advances ...

    SBIR Phase I 2019 Department of DefenseArmy
  4. Active fan/blower noise reduction

    SBC: Great Lakes Sound & Vibration, Inc.            Topic: A16121

    GLSV seeks to complete the development of the active fan/blow noise reduction system.Through the Phase I effort, GLSV has proved feasibility in all key aspects of the system requirements.Efforts were taken to best understand the state of technology by conducting research and consulting with technical leaders of previous research development projects.System integration concepts and control methodol ...

    SBIR Phase II 2019 Department of DefenseArmy
  5. ADAPTIVE TACTICAL POWER DISTRIBUTION SYSTEM

    SBC: Lica Systems, Inc.            Topic: N/A

    GENERATOR USED PRIMARY POWER SYSTEMS ARE THE ACHILLES HEEL OF TACTICAL COMMAND AND CONTROL SYSTEMS, FIELD HOSPITALS, AND OTHER TACTICAL SUPPORT FACILITIES. THEY ARE NOISY AND PRONE TO FAILURE AT THE MOST CRITICAL TIMES. TACTICAL POWER USING SYSTEMS HAVE DIFFERENT POWER DUTY CYCLES AND POWER FACTORS. SOME ARE PREDICTABLE; OTHER TOTALLY RANDOM; AND MANY MUST BE DEPENDED UPON IN THE "HEAT OF THE BATT ...

    SBIR Phase I 1987 Department of DefenseArmy
  6. ADVANCED FACILITIES TO EXPEDITE DESIGN AND EVALUATION OF COMMUNICATIONS SYSTEMS

    SBC: Information Research            Topic: N/A

    THE TECHNICAL OBJECTIVE OF THIS PROJECT IS TO ESTABLISH THE FEASILBILITY OF SATISFYING THE REQUIREMENTS OF THE U.S. ARMY COMMUNICATIONS ELECTRONICS COMMAND (CECOM) FOR RAPID AND EFFECTIVE MODELING OF U.S. ARMY COMMUNICATION SYSTEMS. THE METHOD WE PROPOSE FOR SATISFYING THESE REQUIREMENTS IS TO ADAPT A TOP-DOWN DESIGN SYSTEM FOR ELECTRONIC SYSTEMS BEING DEVELOPED FOR THE U.S. NAVY TO MODEL-ING OF C ...

    SBIR Phase I 1987 Department of DefenseArmy
  7. Advanced Instrumentation for Non-Nulling Stack Velocity Testing

    SBC: AIRFLOW SCIENCES CORPORATION            Topic: None

    Industrial facilities, manufacturing plants, and electric power plants that burn fossil fuels exhaust the combustion products to atmosphere through their smokestacks. Stack pollutant emissions are quantified using manual testing methods developed in the 1960s, which are prone to error if non-axial flow exists in a stack.Recently, NIST has been working on an improved technique of performing 3D flow ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  8. Advanced Manufacturing and Material Measurements Software Tool Weave ™ for the Acceleration and Automation of SEM Image Analysis in the Semiconductor Industry

    SBC: Sandbox Semiconductor Incorporated            Topic: None

    In this Phase I SBIR proposal, SandBox Semiconductor™ proposes to develop an Advanced Manufacturing and Material Measurements software tool called Weave ™ for accelerating and automating SEM image analysis for the semiconductor industry. During the development of a new manufacturing process line for a semiconductor device, tens of thousands of scanning electron microscopy (SEM) images are take ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  9. ADVANCED SENSORS FOR CLOSE PROXIMITY ROBOTIC MINE DETECTION

    SBC: Coleman Research Corp.            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseArmy
  10. Affordable Electric Unmanned Ground Vehicle Force Protection Sensor System--18-025

    SBC: Metron, Incorporated            Topic: A18085

    Force protection represents a critical safety priority for Army units serving in Forward Operating Bases (FOBs).While current systems are extending sensor reach beyond the bases perimeter via elevated sensor platforms, further advances in threat detection beyond the boundary are possible with sensors outside the FOB.Unmanned Ground Vehicles (UGVs) can provide a safe and cost-effective way of exten ...

    SBIR Phase I 2019 Department of DefenseArmy
US Flag An Official Website of the United States Government