Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Advanced Instrumentation for Non-Nulling Stack Velocity Testing

    SBC: AIRFLOW SCIENCES CORPORATION            Topic: None

    Industrial facilities, manufacturing plants, and electric power plants that burn fossil fuels exhaust the combustion products to atmosphere through their smokestacks. Stack pollutant emissions are quantified using manual testing methods developed in the 1960s, which are prone to error if non-axial flow exists in a stack.Recently, NIST has been working on an improved technique of performing 3D flow ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  2. Advanced Manufacturing and Material Measurements Software Tool Weave ™ for the Acceleration and Automation of SEM Image Analysis in the Semiconductor Industry

    SBC: Sandbox Semiconductor Incorporated            Topic: None

    In this Phase I SBIR proposal, SandBox Semiconductor™ proposes to develop an Advanced Manufacturing and Material Measurements software tool called Weave ™ for accelerating and automating SEM image analysis for the semiconductor industry. During the development of a new manufacturing process line for a semiconductor device, tens of thousands of scanning electron microscopy (SEM) images are take ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  3. Advanced Tools for Process Specification Language

    SBC: KNOWLEDGE BASED SYSTEMS, INC.            Topic: N/A

    This project will (i) extend and harden the PSL Editor and the Ontology-Driven XSLT Generator (ODXG) tools and (ii) extend the process description syntax (PDS) derived from the PSL for both KIF and XML/RDF formats. In addition, we will extend the PSL metatheoretical framework to support the PDS and the PSL tools by providing PSL extensions to support calendars and activity specialization, and by d ...

    SBIR Phase II 2003 Department of CommerceNational Institute of Standards and Technology
  4. Automated Reconfiguable Intelligent Radio (ARIR)

    SBC: WILLIAMSRDM, INC.            Topic: N/A

    Williams-Pyro, Inc. proposes to develop an Automated Reconfigurable Intelligent Radio (ARIR), which consists of a series of distributed nodes that will relay voice and data to Intelligent Access Points (IAP) located within the building. This system will allow faster, more accurate information transmission, resulting in timely fire detection and safer firefighting. The main goal of ARIR is to ident ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  5. Complex Crystalloid Resuscitative Fluid

    SBC: GanD Inc            Topic: DHA172009

    Problem: Currently available resuscitation fluids have been shown to induce detrimental effects on trauma outcomes.Objective: The objective of this proposal is to use the data from the successful Phase 1 studies to guide the continued development and testing of the novel resuscitation fluid (GND-001), which has been designed to address the deficiencies of current resuscitation fluids.Proposed work ...

    SBIR Phase II 2019 Department of DefenseDefense Health Program
  6. Development of a Neutron-based Nondestructive Test Method for Concrete Petrography and Chemical Analysis

    SBC: TOURNEY CONSULTING GROUP, LLC            Topic: None

    To evaluate the technical feasibility of prompt gamma neutron activation (PGAA) as an alternative to a set of standard destructive tests of concrete petrography including aggregate type, water/cement ratio, aggregate/binder ratio, density, chloride content and chloride bulk diffusion constant; and to determine the specifications for the design of a dedicated commercial laboratory-based PGAA facili ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  7. Development of Multifunctional Open-system Sensor Integration Tool (MOSIT)

    SBC: WILLIAMSRDM, INC.            Topic: N/A

    Williams-Pyro, Inc. proposes to model and develop software to provide an interface allowing a common method of incorporating sensing components within different systems. The proposed software package, called the Multifunctional Open-system Sensor Integration Tool (MOSIT), will provide the circuit designer with a complete sensor interface solution. MOSIT will provide not only the Network Capable Ap ...

    SBIR Phase I 2003 Department of CommerceNational Institute of Standards and Technology
  8. Development of the Smart Environmental Monitoring System (SEMS)

    SBC: WILLIAMSRDM, INC.            Topic: N/A

    Firefighters have expressed the need for both increased accuracy in fire detection systems and greater access to environmental information in the event of a fire. To accomplish both tasks, Williams-Pyro, Inc. proposes to develop the Smart Environmental Monitoring System (SEMS). This system comprises both an advanced fire detection system and the networking capability necessary to provide real-time ...

    SBIR Phase II 2003 Department of CommerceNational Institute of Standards and Technology
  9. Development of the JoRT Platform for Realistic Joint Reduction Training

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: DHA173002

    Joint reduction is a key skill and is a core competency for orthopedic surgeons deploying as part of a trauma team.Current training options are limited to classroom instruction on uninjured persons due to lack of a suitable training simulator. The first true reduction performed by medical providers is on actual patients. This method of instruction prevents the trainee from developing the comfort a ...

    SBIR Phase II 2019 Department of DefenseDefense Health Program
  10. Dual Plane 3D Compton Scattering Imager with Pixelated CZT Detectors for 1-10MeV Gamma Ray

    SBC: H3D            Topic: None

    Phase I has proven that the current setup achieves better than 8mm spatial resolution for 2.2MeV prompt gammas. However, 1mm spatial resolution presents a significant challenge for the current setup due in part to limited timing resolution and count rate. A new analog ASIC will be developed to replace the current analog ASIC that will have better timing resolution and deliver higher count rates. I ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government