Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Acoustic Pulsed Phase Locking Energy Sensor (APPLES)

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: N/A

    Luna Innovations has developed for NIST a low-cost, yet high resolution acoustic sensor system capable of determining ten micro-degree changes in a water path caused by clinical medical radiation devices. A system will be delivered to NIST for their evaluation and testing. The sensors are external to the water and play a negligible role in error sources from thermal transfer in contrast to current ...

    SBIR Phase II 2005 Department of CommerceNational Institute of Standards and Technology
  2. Active Mixing of Polymers in a Dispensing Head

    SBC: nScrypt, Inc.            Topic: N/A

    A method to take three polymers with varying viscosities and mixing those polymers together at the point of interest or more specifically through a micro dispensing nozzle, is being proposed. An active mixing scheme to ensure proper mixing at the pen tip is a feasible approach to this problem. The materials being mixed will not only range in viscosity but also in particle loading, which will be ha ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  3. Advanced Instrumentation for Non-Nulling Stack Velocity Testing

    SBC: AIRFLOW SCIENCES CORPORATION            Topic: None

    Industrial facilities, manufacturing plants, and electric power plants that burn fossil fuels exhaust the combustion products to atmosphere through their smokestacks. Stack pollutant emissions are quantified using manual testing methods developed in the 1960s, which are prone to error if non-axial flow exists in a stack.Recently, NIST has been working on an improved technique of performing 3D flow ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  4. Advanced Manufacturing and Material Measurements Software Tool Weave ™ for the Acceleration and Automation of SEM Image Analysis in the Semiconductor Industry

    SBC: Sandbox Semiconductor Incorporated            Topic: None

    In this Phase I SBIR proposal, SandBox Semiconductor™ proposes to develop an Advanced Manufacturing and Material Measurements software tool called Weave ™ for accelerating and automating SEM image analysis for the semiconductor industry. During the development of a new manufacturing process line for a semiconductor device, tens of thousands of scanning electron microscopy (SEM) images are take ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  5. Collaborative Tools and Extinsible Object Interaction Techniques for Virtual Environments

    SBC: OPEN TECH, INC.            Topic: N/A

    Open Tech proposes to develop a fully extensible collaborative tools framework that combines powerful features, and intuitive user interface, and the ability to easily implement new and imaginative object interaction techniques. The tools will allow users of both local and remote immersive VE systems to join together in a single shared VE that allows them to interact with each other and with objec ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  6. Complex Crystalloid Resuscitative Fluid

    SBC: GanD Inc            Topic: DHA172009

    Problem: Currently available resuscitation fluids have been shown to induce detrimental effects on trauma outcomes.Objective: The objective of this proposal is to use the data from the successful Phase 1 studies to guide the continued development and testing of the novel resuscitation fluid (GND-001), which has been designed to address the deficiencies of current resuscitation fluids.Proposed work ...

    SBIR Phase II 2019 Department of DefenseDefense Health Program
  7. Construction of a Force Probe for Characterization of Microscale Features

    SBC: INSITUTEC, INC.            Topic: N/A

    The pressing need exists within industry to accurately measure high aspect ratio microscale structures. For example, diesel injector nozzles are manufactured with microscale holes ranging from 50-200 micrometers in diameter and 3-5 mm depths. One fundamental challenge is to nondestrucvely measure these features in order to validate models, enhance manufacturing processes, and reduce fuel emissions ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
  8. Development of a Neutron-based Nondestructive Test Method for Concrete Petrography and Chemical Analysis

    SBC: TOURNEY CONSULTING GROUP, LLC            Topic: None

    To evaluate the technical feasibility of prompt gamma neutron activation (PGAA) as an alternative to a set of standard destructive tests of concrete petrography including aggregate type, water/cement ratio, aggregate/binder ratio, density, chloride content and chloride bulk diffusion constant; and to determine the specifications for the design of a dedicated commercial laboratory-based PGAA facili ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  9. Development of the JoRT Platform for Realistic Joint Reduction Training

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: DHA173002

    Joint reduction is a key skill and is a core competency for orthopedic surgeons deploying as part of a trauma team.Current training options are limited to classroom instruction on uninjured persons due to lack of a suitable training simulator. The first true reduction performed by medical providers is on actual patients. This method of instruction prevents the trainee from developing the comfort a ...

    SBIR Phase II 2019 Department of DefenseDefense Health Program
  10. Distributed Automatic Reconifigurable Transponder (DART)

    SBC: WILLIAMSRDM, INC.            Topic: N/A

    his proposal focuses on developing Distributed Automatic Reconfigurable Trasponder (DART) system that is capable of achieving distributed multi-nodal voice/data communication for firefighters. Specifically, Williams-Pyro, Inc. proposes to develop an enhanced prototype of distributed Automated Reconfigurable Intelligent Radios, which consists of a series of distributed nodes that will relay voice t ...

    SBIR Phase I 2005 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government