Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. Advanced Manufacturing and Material Measurements Software Tool Weave ™ for the Acceleration and Automation of SEM Image Analysis in the Semiconductor Industry

    SBC: Sandbox Semiconductor Incorporated            Topic: None

    In this Phase I SBIR proposal, SandBox Semiconductor™ proposes to develop an Advanced Manufacturing and Material Measurements software tool called Weave ™ for accelerating and automating SEM image analysis for the semiconductor industry. During the development of a new manufacturing process line for a semiconductor device, tens of thousands of scanning electron microscopy (SEM) images are take ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  2. An Elevated-Temperature Nanobalance Based on Piezoelectric Shear Mode Resonators (quartz, gallium phosphate, and langasite)

    SBC: Masscal Corporation            Topic: N/A

    The work proposed will provide a demonstration of feasibility and specific design recommendations for building an elevated-temperature resonating crystal balance with nanogram sensitivity. The approach will build upon existing technology commercialized by Masscal for operating a QCM in a temperature-controlled calorimeter. Precise temperature control and new types of crystal sensors will be used t ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  3. Complex Crystalloid Resuscitative Fluid

    SBC: GanD Inc            Topic: DHA172009

    Problem: Currently available resuscitation fluids have been shown to induce detrimental effects on trauma outcomes.Objective: The objective of this proposal is to use the data from the successful Phase 1 studies to guide the continued development and testing of the novel resuscitation fluid (GND-001), which has been designed to address the deficiencies of current resuscitation fluids.Proposed work ...

    SBIR Phase II 2019 Department of DefenseDefense Health Program
  4. CVD-based Polytype Controlled SiC Nanowire Growth

    SBC: GENESIC SEMICONDUCTOR INC.            Topic: N/A

    A novel chemical vapor deposition (CVD) based step-flow epitaxy process is proposed for controllable growth of SiC nanowires with high polytype integrity. SiC nanowires will be grown in a modified commercial high-temperature CVD reactor, used by industry for growing high-quality SiC epitaxial thin films. Different polytypes of SiC nanowires will be grown by choosing appropriate substrate materials ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  5. Development of the JoRT Platform for Realistic Joint Reduction Training

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: DHA173002

    Joint reduction is a key skill and is a core competency for orthopedic surgeons deploying as part of a trauma team.Current training options are limited to classroom instruction on uninjured persons due to lack of a suitable training simulator. The first true reduction performed by medical providers is on actual patients. This method of instruction prevents the trainee from developing the comfort a ...

    SBIR Phase II 2019 Department of DefenseDefense Health Program
  6. Gap-Free Model-Based Engineering for Manufacturing and Analysis: Digital Thread without Translation

    SBC: Nvariate, Inc.            Topic: None

    Modern Model-Based Enterprise / Engineering (MBE) systems rely on freeform surfaces built as complex combinations of geometric primitives to define engineered objects. Unfortunately, the intersection of freeform surfaces in MBE applications results in highly approximated solutions, degrading models that cost billions annually by US industry to fix. Current technology limits the abilities of users ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  7. Improved Silicon Drift Detector Coincidence Rejection for Digital Pulse Processors

    SBC: 4pi Analysis, Inc.            Topic: N/A

    The recent emergence of the Silicon Drift detector (SDD), for use in Energy Dispersive x-ray Spectroscopy (EDS), has made possible x-ray event streams with input count rates in the range of 1-10 Mcps. Modern digital pulse processors are therefore required to run at fast time constants to achieve reasonable throughput; however, this causes significant coincidence artifacts to appear in the spectrum ...

    SBIR Phase I 2008 Department of CommerceNational Institute of Standards and Technology
  8. Joint Dislocation and Reduction Simulator for Training

    SBC: Simetri, Inc.            Topic: DHA173002

    SIMETRIs effort to design, develop, and commercialize the Joint Articulation and Reduction Simulator (JAARS) integrates existing commercial manikin technology, presents multiple dislocation scenarios, and makes use of a modular design that includes Commercial Off the Shelf (COTS) and 3D printed components, with embedded sensors to provide student performance feedback as well as consumable expendit ...

    SBIR Phase II 2019 Department of DefenseDefense Health Program
  9. Microcapillary Quartz Sensors for Screening Injectability of High Concentration Protein Formulations

    SBC: Qatch Technologies, LLC            Topic: None

    The objective of this SBIR Phase I proposal is to determine the feasibility of viscosity characterization of high concentration protein formulations (HCF) by QATCH’s microcapillary quartz technology. HCFs are non-Newtonian fluids with shear-thinning behavior and they are administered to patients by subcutaneous or muscular injections. The injectability of HCFs depends on the viscosity at high-sh ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  10. Mobile Causality Display Toolkit for Tactical Combat Casualty Care

    SBC: QUANTIFIED DESIGN SOLUTIONS, LLC            Topic: DHA172006

    The high rate of non-medical Soldiers (Combat Lifesavers and self-aid/buddy-aid) performing field care necessitates additional medical training for those Warfighters. Unfortunately, most non-medical personnel are not provided with opportunities to practice medical skills in a high stress environment prior to completing them during live missions due to a lack of access to ruggedized high fidelity t ...

    SBIR Phase II 2019 Department of DefenseDefense Health Program
US Flag An Official Website of the United States Government