Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. Advanced Instrumentation for Non-Nulling Stack Velocity Testing

    SBC: AIRFLOW SCIENCES CORPORATION            Topic: None

    Industrial facilities, manufacturing plants, and electric power plants that burn fossil fuels exhaust the combustion products to atmosphere through their smokestacks. Stack pollutant emissions are quantified using manual testing methods developed in the 1960s, which are prone to error if non-axial flow exists in a stack.Recently, NIST has been working on an improved technique of performing 3D flow ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  2. Advanced Manufacturing and Material Measurements Software Tool Weave ™ for the Acceleration and Automation of SEM Image Analysis in the Semiconductor Industry

    SBC: Sandbox Semiconductor Incorporated            Topic: None

    In this Phase I SBIR proposal, SandBox Semiconductor™ proposes to develop an Advanced Manufacturing and Material Measurements software tool called Weave ™ for accelerating and automating SEM image analysis for the semiconductor industry. During the development of a new manufacturing process line for a semiconductor device, tens of thousands of scanning electron microscopy (SEM) images are take ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  3. Complex Crystalloid Resuscitative Fluid

    SBC: GanD Inc            Topic: DHA172009

    Problem: Currently available resuscitation fluids have been shown to induce detrimental effects on trauma outcomes.Objective: The objective of this proposal is to use the data from the successful Phase 1 studies to guide the continued development and testing of the novel resuscitation fluid (GND-001), which has been designed to address the deficiencies of current resuscitation fluids.Proposed work ...

    SBIR Phase II 2019 Department of DefenseDefense Health Program
  4. Developing Commercial Quantum Resistance Standard Based on Epitaxial Graphene

    SBC: Graphene Waves, LLC            Topic: None

    Graphene Waves proposes to develop a quantum Hall resistance (QHR) standard based on graphene that can be deployed for general electrical calibration in industries. Current QHR standard is based on GaAs/AlGaAs heterostructure and requires expensive liquid helium to operate. The continuous increase in price and unstable supply chain of liquid helium limit the QHR standard to be only affordable by t ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  5. Development of a Neutron-based Nondestructive Test Method for Concrete Petrography and Chemical Analysis

    SBC: TOURNEY CONSULTING GROUP, LLC            Topic: None

    To evaluate the technical feasibility of prompt gamma neutron activation (PGAA) as an alternative to a set of standard destructive tests of concrete petrography including aggregate type, water/cement ratio, aggregate/binder ratio, density, chloride content and chloride bulk diffusion constant; and to determine the specifications for the design of a dedicated commercial laboratory-based PGAA facili ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  6. Development of the JoRT Platform for Realistic Joint Reduction Training

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: DHA173002

    Joint reduction is a key skill and is a core competency for orthopedic surgeons deploying as part of a trauma team.Current training options are limited to classroom instruction on uninjured persons due to lack of a suitable training simulator. The first true reduction performed by medical providers is on actual patients. This method of instruction prevents the trainee from developing the comfort a ...

    SBIR Phase II 2019 Department of DefenseDefense Health Program
  7. Dual Plane 3D Compton Scattering Imager with Pixelated CZT Detectors for 1-10MeV Gamma Ray

    SBC: H3D            Topic: None

    Phase I has proven that the current setup achieves better than 8mm spatial resolution for 2.2MeV prompt gammas. However, 1mm spatial resolution presents a significant challenge for the current setup due in part to limited timing resolution and count rate. A new analog ASIC will be developed to replace the current analog ASIC that will have better timing resolution and deliver higher count rates. I ...

    SBIR Phase II 2019 Department of CommerceNational Institute of Standards and Technology
  8. Gap-Free Model-Based Engineering for Manufacturing and Analysis: Digital Thread without Translation

    SBC: Nvariate, Inc.            Topic: None

    Modern Model-Based Enterprise / Engineering (MBE) systems rely on freeform surfaces built as complex combinations of geometric primitives to define engineered objects. Unfortunately, the intersection of freeform surfaces in MBE applications results in highly approximated solutions, degrading models that cost billions annually by US industry to fix. Current technology limits the abilities of users ...

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
  9. Joint Dislocation and Reduction Simulator for Training

    SBC: Simetri, Inc.            Topic: DHA173002

    SIMETRIs effort to design, develop, and commercialize the Joint Articulation and Reduction Simulator (JAARS) integrates existing commercial manikin technology, presents multiple dislocation scenarios, and makes use of a modular design that includes Commercial Off the Shelf (COTS) and 3D printed components, with embedded sensors to provide student performance feedback as well as consumable expendit ...

    SBIR Phase II 2019 Department of DefenseDefense Health Program
  10. Laser Particle Separation

    SBC: Opthos Instrument Company, LLC            Topic: None

    Parman Tech is dedicated to commercializing a NIST technology for sorting nano-particles. This technology uses the force of light to gently guide particles along different paths depending on the size of makeup of each particle.

    SBIR Phase I 2019 Department of CommerceNational Institute of Standards and Technology
US Flag An Official Website of the United States Government