Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. A PASSIVE RF SEEKER AUTOMATIC SHIP TARGET IDENTIFIER AND CLASSIFIER FOR CRUISE MISSILES DEVELOPMENT

    SBC: Scope Inc.            Topic: N/A

    AN RF SEEKER SIGNAL PROCESSING TECHNOLOGY IS PROPOSED TO BE DEVELOPED HERE TO PASSIVELY IDENTIFY AND CLASSIFY SHIP TARGETS FOR CRUISE MISSILES. THIS PROPOSED TECHNOLOGY IS AN ADAPTATION OF REAL TIME RF EMITTER IDENTIFICATION SYSTEMS PREVIOUSLY DEVELOPED AND IMPLEMENTED BY SCOPE, INC. THE FUNDAMENTAL CONCEPT RELIES ON THE PASSIVE EXPLOITATION OF UNINTENTIONAL CHARACTERISTIC MODULATIONS IMPOSED ON R ...

    SBIR Phase II 1987 Department of DefenseNavy
  2. A Remote Egg-oiling System with Autonomous and Automated Target Object Identification for Nuisance Bird Management

    SBC: Boardwalk Contracting Services Corp.            Topic: N183142

    The problem of pest bird control is a thorny one for wildlife managers. A useful tool for controlling the numbers of pest birds is egg oiling, a method to render eggs non-viable, but prior use was restricted to ground nesting species. Common ravens are serious pests of agriculture and attack many threatened and endangered species but nest in locations out of reach from the ground. Three years of d ...

    SBIR Phase I 2019 Department of DefenseNavy
  3. Additive Manufacturing for Naval Aviation Battery Applications

    SBC: Texas Research Institute, Austin, Inc.            Topic: N18AT008

    Texas Research Austin (TRI-Austin) will continue to partner with the University of Texas, Austin, to use additive manufacturing for fabricating and optimizing the lithium ion and electroactive metal electrode systems for which the team established proof of concept in the Phase I base period. The Aerosol Deposition Method (ADM) is a broadly applicable additive manufacturing technology that has been ...

    STTR Phase II 2019 Department of DefenseNavy
  4. ADVANCED DIGITAL FRINGE ANALYSIS WORKSTATION

    SBC: Kms Fusion Inc            Topic: N/A

    N/A

    SBIR Phase I 1987 Department of DefenseNavy
  5. Advanced Submarine Control (ASC) Direct Drive Motor (DDM) Maturation

    SBC: PROGENY SYSTEMS CORPORATION            Topic: N092139

    The Advanced Submarine Control (ASC) project is a pivotal technology development effort which will revolutionize how current and future US Submarines conduct surface maneuvering, ice piloting, station-keeping and automated positioning of the submarine to support an extensive range of missions. For its initial application, ASC has been developed as a new independent secondary propulsion technology ...

    SBIR Phase II 2019 Department of DefenseNavy
  6. AIRCRAFT SUPPORT EQUIPMENT SHOCK RESPONSE

    SBC: Designers & Planners Inc            Topic: N/A

    CURRENT SHIPBOARD AIRCRAFT SUPPORT EQUIPMENT HAS INADEQUATE CAPABILITY TO RESIST EXPECTED SHOCK LEVELS IN HEAVY WEATHER AND COMBAT OPERATIONS. CAREFUL REVIEW OF THE STATE-OF-THE-ART INDICATES THAT MANY CURRENTLY USED PROCEDURES FOR SHOCK RESPONSE PREDICTION OF SHIPBOARD EQUIPMENT AND FOR SHIP GIRDER RESPONSE TO SHOCK LOADS ARE INADEQUATE BECAUSE OF THE MANY ASSUMPTIONS AND THE OVERSIMPLIFIED MODEL ...

    SBIR Phase I 1987 Department of DefenseNavy
  7. Air Crew Endurance System (ACES)

    SBC: LUNA INNOVATIONS INCORPORATED            Topic: N191015

    Musculoskeletal pain and discomfort have been known in the rotary wing community for at least 50 years. A combination of poor seat ergonomics and cockpit design dictated by crash dynamics in concert with whole body vibrations have resulted in airframes that actively promote poor posture and induce high rates of pain within the community. This endemic back pain within the community is accepted as p ...

    SBIR Phase I 2019 Department of DefenseNavy
  8. Anti-Reflective Surface Structures for Missile Domes

    SBC: NANOHMICS INC            Topic: N182105

    Next-generation infrared (IR) seekers will have an aerodynamically-engineered nose cone geometry with a significantly higher degree of curvature compared to conventional hemispherical domes. To prevent unwanted specular + diffuse reflections that obscure the IR focal plane array, the interior of the dome should ideally be treated with an anti-reflective (AR) layer that suppresses stray light refle ...

    SBIR Phase I 2019 Department of DefenseNavy
  9. APPLICATION OF THE AIRBORNE ELECTROMAGNETIC METHOD TO SUBMARINE DETECTION

    SBC: GEOPHEX, LTD.            Topic: N/A

    GEOPHEX, LTD. PROPOSES TO DEVELOP AN AIRBORNE ELECTROMAGNETIC (AEM) SYSTEM DEDICATED TO THE DETECTION OF SUBMARINES IN THE OCEAN (TOPIC NO. N87-22, THE DOD SBIR PROGRAM, 1987). THE AEM METHOD HAS RECENTLY EMERGED AS A VIABLE TECHNIQUE FOR AIRBORNE CHARTING OF WATER DEPTH (IN EXCESS OF PERHAPS 100 M), WATER CONDUCTIVITY (THUS, SALINITY AND TEMPERATURE VARIATIONS), AND BOTTOM SEDIMENT CONDUCTIVITY ( ...

    SBIR Phase I 1987 Department of DefenseNavy
  10. Architecture Methodology Integration

    SBC: Trident Systems Incorporated            Topic: AF073016

    Research Proposed: Research is proposed to develop a novel system-level impact analysis capability into the Software Change Impact Analysis Tool (SCIAT), for usage on Submarine Warfare Federated Tactical System (SWFTS) and other large scale integrated systems.Problem Statement: SCIAT is a software tool that objectively identifies all areas impacted by code changes (direct and indirect). Using a co ...

    SBIR Phase II 2019 Department of DefenseNavy
US Flag An Official Website of the United States Government