Award Data

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until September, 2020.

  1. A Field Deployable MDA Analyzer

    SBC: Lynntech Inc.            Topic: AF191028

    Trace level metals such as copper in aviation turbine fuel can significantly accelerate thermal instability of the fuel, leading to oxidation and production of detrimental insoluble deposits in the engine.The primary method of correcting the issue is through the addition of a metal deactivator additive (MDA) into the fuel.Because of its surface activity and adsorptive properties, MDA may be reduce ...

    SBIR Phase I 2019 Department of DefenseAir Force
  2. A REAL-TIME 3-D CLOUD SIMULATION SYSTEM DEVELOPMENT

    SBC: Aeromet, Inc.            Topic: N/A

    THIS PROPOSAL DESCRIBES A FEASIBILITY STUDY FOR IMPLEMENTING A REALTIME, THREE-DIMENSIONAL CLOUD MODEL TO SUPPORT REENTRY VEHICLE TEST OPERATIONS. AN EXISTING RESEARCH CLOUD MODEL WOULD BE INTERFACED TO A MESOSCALE ATMOSPHERIC MODEL. THE COMBINED MODELING SYSTEM WOULD BE ADAPTED FOR USE AT THE KWAJALEIN MISSILE RANGE (KMR). FORECASTS OF DETAILED CLOUD FEATURES SUCH AS WATER CONTENT, RADAR REFLECTI ...

    SBIR Phase II 1987 Department of DefenseAir Force
  3. ACOUSTO-OPTIC PROCESSOR FOR SYNTHETIC APERTURE RADAR

    SBC: Photonic Systems, Inc.            Topic: N/A

    PROCESSING OF SAR DATA IN REAL TIME REQUIRES HIGH SPEED COMPUTATION DEVICES CURRENTLY BEYOND THE STATE-OF-THE-ART OF CONVENTIONAL METHODS. DESIRED PROCESSORS MUST ALSO BE SMALL, RUGGED AND LOW POWER TO BE DEPLOYED ON AIRCRAFT. OPTICAL TECHNIQUES CAN SATISFY THESE REQUIREMENTS WITH IMAGINATIVE ARCHITECTURES. THIS PROPOSAL PRESENTS AN INNOVATIVE APPROACH FOR REAL TIME SAR IMAGE RECONSTRUCTION THAT C ...

    SBIR Phase I 1987 Department of DefenseAir Force
  4. Adaptive Digital Enabler of Personal assistance Technology (ADEPT)

    SBC: KNOWLEDGE BASED SYSTEMS, INC.            Topic: AF191021

    KBSI proposes to research, design, and demonstrate the Adaptive Digital Enabler of Personal assistance Technology (ADEPT). ADEPT is a Digital Personal Assistant (DPA) designed to enhance the effectiveness of ISR analysts by addressing their ingestion, analysis, and packaging needs. The proposed ADEPT capability will support automated data ingest and clean up, automated intelligent data fusion and ...

    SBIR Phase I 2019 Department of DefenseAir Force
  5. ADAPTIVE GRID TECHNIQUES FOR USE IN COMPUTATIONAL FLUID DYNAMICS

    SBC: Computational Mechan            Topic: N/A

    THIS PROJECT FOCUSES ON THE TWO MOST IMPORTANT ISSUES OF ALL OF COMPUTATIONAL FLUID DYNAMICS: 1) HOW GOOD ARE THE NUMERICAL ANSWERS OBTAINED IN A COMPUTATION? AND 2) HOW CAN THE BEST POSSIBLE ANSWERS BE OBTAINED FOR A FIXED AND LIMITED COMPUTATIONAL EFFORT, BUDGET, OR COMPUTING CAPABILITY? IN GENERAL TERMS THE ANSWERS TO THESE QUESTIONS ARE 1) TO DETERMINE RELIABLE A-POSTERIORI ESTIMATES OF ERROR ...

    SBIR Phase II 1987 Department of DefenseAir Force
  6. ADAPTIVE NULLING BY ELECTRICAL SURFACE CONTROL OF A REFLECTOR ANTENNA

    SBC: COMPUTER SCIENCE INNOVATIONS, INC.            Topic: N/A

    AN INNOVATIVE APPROACH TO FORMING A NULL IN THE SECONDARY PATTERN OF A REFLECTOR ANTENNA IS DEVELOPED BY THIS PROJECT. AN ELECTRONICALLY CONTROLLABLE REFLECTIVE SURFACE BEING DEVELOPED ON A NASA SBIR IS THE STARTING POINT FOR THE WORK. THIS PROJECT EXTENDS THE PERFORMANCE OF THE SURFACE SO THAT IT IS USEFUL AS A NULL FORMER. THE RESULT IS CONSIDERABLY REDUCED COST OF NULL STEERING ANTENNAS. THE DE ...

    SBIR Phase II 1987 Department of DefenseAir Force
  7. Additive Manufacturing of carbon nanotube metal matrix composites using high performance aluminum

    SBC: Shepra, Inc.            Topic: AF182005

    Additive manufacturing of non-eutectic aluminum alloys (6061 Al) through the use of carbon nanotubes to prevent tearing during the solidification process.

    SBIR Phase I 2019 Department of DefenseAir Force
  8. Additive Manufacturing of High-Index Photonic Circuits

    SBC: NANOHMICS INC            Topic: AF141173

    "ABSTRACT: Modern electronic and opto-electronic devices are predicated on controlled deposition and patterning of functional material layers (e.g. semiconductors, conductors, and dielectrics). A handful of techniques, including vacuum epitaxy and chemical vapor deposition, in conjunction with lithographic micromachining methods, have long dominated the manufacture of these systems, particularly ...

    SBIR Phase II 2015 Department of DefenseAir Force
  9. Additive manufacturing of high-index photonic circuits

    SBC: NANOHMICS INC            Topic: AF141173

    ABSTRACT:Modern electronic and opto-electronic devices are predicated on controlled deposition and patterning of functional material layers (e.g. semiconductors, conductors, and dielectrics). Vacuum epitaxy and chemical vapor deposition, in conjunction with lithographic methods, have dominated the manufacture of these systems. While these techniques are well-established and routinely deliver relia ...

    SBIR Phase II 2015 Department of DefenseAir Force
  10. Advanced Component Cooling Design and Evaluation for Gas Turbine Engines

    SBC: Florida Turbine Technologies Inc.            Topic: AF151059

    ABSTRACT: Florida Turbine Technologies, Inc. (FTT), a small business located in Jupiter, Florida proposes the subject program to enable physics-based tools to be made more robust such that they can be used with confidence during the design process. With this program, FTT and AeroDynamic Solutions, Inc. (ADS) will cooperate to integrate conjugate Computational Fluid Dynamics (CFD) and heat transfe ...

    SBIR Phase I 2015 Department of DefenseAir Force
US Flag An Official Website of the United States Government