List

For best search results, use the search terms first and then apply the filters
Reset

The Award database is continually updated throughout the year. As a result, data for FY19 is not expected to be complete until June, 2020.

  1. > 1,000 W/kg Rad-Hard, High-Voltage PV Blanket at < $50/W IMM Cell Cost

    SBC: MARK O'NEILL, LLC            Topic: Z101

    The innovation is a new Stretched Lens Array (SLA) with a thinner, lighter, more robust Fresnel lens (with thin glass or polymer superstrate or embedded aluminum mesh). The new lens enables a blanket-level specific power > 1,000 W/kg, including lenses, PV cell circuit (including cells, encapsulation, high-voltage insulation, and heavy radiation shielding), and waste heat rejection radiator. The ne ...

    SBIR Phase II 2015 National Aeronautics and Space Administration
  2. "A SIMPLE HIGH PERFORMANCE AVALANCHE PHOTODIODE FOR LONG-WAVELENGTH OPTICAL COMMUNICATIONS"

    SBC: Eti Instrument Systems Inc.            Topic: N/A

    N/A

    SBIR Phase I 1987 National Science Foundation
  3. "ALTERNATIVE MARINE COATINGS, AN ENVIRONMENTAL OPTION"

    SBC: KROSS, Inc.            Topic: N/A

    N/A

    SBIR Phase I 1987 Environmental Protection Agency
  4. "DEVELOPMENT OF A UNIQUE LABORATORY STANDARD INDIUM GALLIUM ARSENIDE DETECTOR FOR THE 0.5-1.7 MICRON SPECTRAL RANGE "

    SBC: Eti Instrument Systems Inc.            Topic: N/A

    N/A

    SBIR Phase I 1987 National Aeronautics and Space Administration
  5. "HIGH PERFORMANCE SIGNAL PROCESSING"

    SBC: The Athena Group, Inc.            Topic: N/A

    THE DIGITAL SIGNAL PROCESSING (DSP) INDUSTRY SUPPLIES ESSENTIAL TOOLS AND TECHNOLOGY TO A HOST OF DEFENSE AND CIVILIAN END-USERS. DSP PRODUCTS ARE FOUND IN MANY FIELDS INCLUDING COMMUNICATIONS, AUDIO, VIDEO, AUTOMATION, GEOPHYSICAL, MEDICAL, AND RADAR/SONAR APPLICATIONS. HOWEVER, MANY CRITICALLY IMPORTANT PROBLEMS CANNOT BE SERVEDBY THIS INDUSTRY DUE TO CURRENT COMPUTATIONAL LIMITATIONS OFDSP HARD ...

    SBIR Phase I 1987 National Science Foundation
  6. "INVESTIGATION OF AN INEXPENIVE MOBILE BIOLOGICALLY ACTIVE AIR FILTRATION (BAF) UNIT FOR VOLATILE ORGANIC (VOC) COM- POUNDS"

    SBC: ERGON PHARMACEUTICALS, LLC            Topic: N/A

    INCREASED EMPHASIS ON THE PROBLEMS ASSOCIATED WITH ING UNDERGROUND STORAGE TANKS AND UNDERGROUND POLLUTION IN GENERAL HAS CREATED A NEED FOR TECHNOLOGY TO REDUCE OR ELIM-INATE THE ASSOCIATED CONTAMINATION. TO DATE, PACKAGE AIR GENERAL HAS CREATED A NEED FOR TECHNOLOGY TO REDUCE OR ELIMINATE THE ASSOCIATED CONTAMINATION. TO DATE, PACKAGE AIR STRIPPING UNITS SEEM TO HAVE RECEIVED THE BROADEST AC- CE ...

    SBIR Phase I 1987 Environmental Protection Agency
  7. (FiReBRIC) First Responder's Body-worn Robust Integrated Communications HUB

    SBC: MAXENTRIC TECHNOLOGIES, LLC            Topic: HSB0151005

    Our objective is to develop an intelligent communications hub, or gateway device, capable of interconnecting wearable technologies with an array of wireless local and wide area communications systems like LMR, commercial & public safety 3G/LTE, WiFi, and mesh networking. To address this, MaXentric is proposing a solution capable of not only interconnecting devices to communications networks, but a ...

    SBIR Phase I 2015 Department of Homeland Security
  8. .50 Caliber Light Weight Precision Ammunition

    SBC: PCP TACTICAL, LLC            Topic: SOCOM13006

    The A606 round is the current round of choice for sniper operations using the M107 or MK-15 weapons platforms.The A606 round was designed as an anti-materiel munitions, is not overly accurate (estimated 2 Minute of Angle), and is heavy (every two rounds weigh approximately a pound).(For example, the M107 weighs 36 pounds and 50 rounds of ammunition weigh 25 additional pounds for a total of 61 poun ...

    SBIR Phase II 2015 Department of DefenseSpecial Operations Command
  9. 3D Printed Clothing Ensembles for The Next Generation Navy Uniform

    SBC: Lynntech Inc.            Topic: N143128

    3D Printing provides unique opportunity to use digital models for production of physical objects. The advancement in 3D Printing led to utilization of the technology in various fields such as automotive, medical, and aerospace. With decline of the cost on 3D printers and expansion of the material selection, new application areas of this unique technology have been emerging. One of these emerging a ...

    SBIR Phase I 2015 Department of DefenseNavy
  10. 4-Quadrant GaN Based Battery Isolator Unit

    SBC: MAINSTREAM ENGINEERING CORPORATION            Topic: A15084

    Current military vehicles use battery-isolating diodes to transfer current between two sets of battery banks, which are heavy, inefficient, and only allow current flow from the higher charged (higher voltage) battery to the other. This proposal details efforts to develop a bi-directional dc-dc converter for military vehicles to allow for smart control of current transfer between battery banks, as ...

    SBIR Phase I 2015 Department of DefenseArmy

Agency Micro-sites

SBA logo
Department of Agriculture logo
Department of Commerce logo
Department of Defense logo
Department of Education logo
Department of Energy logo
Department of Health and Human Services logo
Department of Homeland Security logo
Department of Transportation logo
Environmental Protection Agency logo
National Aeronautics and Space Administration logo
National Science Foundation logo
US Flag An Official Website of the United States Government